Onforu PIR LED Wall Lights with Motion Sensor

Components and Structure

The wall light consists of the following parts:

• Cover
• LED Light Source
• Lamp Base
• Motion Sensor

Specifications

Dimensions

Note: The testing standard of the product's luminous flux involves placing five lights on the same horizontal surface for testing.

Parts List

• EVA Gasket (QTY: 1)
• Machine Screw (QTY: 3)
• Mounting Bracket (QTY: 1)
• Wire Nuts (QTY: 2)
• Silicone Gasket (QTY: 1)

Pairing LED Light with "Onforu" App

Step 1: Download the "Onforu Home" App.

You can download the app by scanning the QR code provided or by searching for "Onforu Home" in the App Store or Google Play.

Step 2: Register and Log In.

Open the "Onforu Home" App. Register an account or log in if you already have one. Note: You will need your app username and password to pair with Amazon Alexa and/or Google Assistant.

Step 3: Prepare for Connection.

Ensure your Wi-Fi and Bluetooth are turned on before connecting the LED lights to the "Onforu Home" App.

Step 4: Pair the LED Light.

To set the light to pending pairing state:

1. Power on the LED Light.
2. Turn the light on and off 3 times until it starts flashing, indicating it's ready for pairing.

Method 1 (Automatic Search):

1. Tap the '+' button on the top right corner and select 'Add Device'.
2. The app will automatically search for the device. Tap 'Add' after discovery.
3. Enter your 2.4 GHz Wi-Fi network name and password.
4. Wait for the device to register (approx. 30-60 seconds).
5. Tap 'Next' to complete pairing.
6. You can change the device name by tapping the '/' icon.
7. Tap 'Done' to enter the control panel.

Method 2 (Manual Selection):

1. Tap the '+' button on the top right corner and select 'Add Device'.
2. Tap 'Lighting' and then 'Light Source' to proceed.
3. Tap the 'Next' button to pair the LED Light.
4. Enter your 2.4 GHz Wi-Fi network name and password.
5. Wait for the device to register (approx. 30-60 seconds).
6. Tap 'Next' to complete pairing.
7. You can change the device name by tapping the '/' icon.
8. Tap 'Done' to enter the control panel.

Important Notes for Pairing:

• This smart LED Light only supports 2.4 GHz Wi-Fi networks; it cannot work with 5.0 GHz networks.
• Ensure your phone is connected to your 2.4 GHz Wi-Fi network.
• Make sure your network is not hidden.

How to Operate the App

1. Color Temperature and Brightness Adjustment: Control the color temperature and brightness of the light.
2. Motion Sensing Settings:
   • Sensing Distance: Adjust between Low (13-26ft), Middle (26-49ft), and High (49-72ft).
   • Full Light Duration: Set the duration the light stays on after motion is detected, from 5 seconds to 60 minutes.
3. Dusk-to-Dawn Settings: Configure the light to only trigger during specific times or under certain light conditions. Options include 'Only trigger during the day' and 'Luminance detection'.
4. Slight Bright Mode: Set the light to a lower brightness level and customize its sensitivity to Day, Dusk, Evening, Night, and Dark conditions. You can also set the brightness for this mode.
5. Timing Settings:
   • Microlight Duration: Set the duration for the slight bright mode, from 1 minute to 8 hours, or set it to be always on.
   • Countdown OFF: Set a countdown timer for the light to turn off.
   • Schedule Empty: Set a schedule for the light to turn on or off.

Note: The countdown and timer modes will not function when the app is closed.

Installation Instructions

Preparation:

• Ensure all parts are present by comparing them with the parts list. Contact customer support if any part is missing or damaged.
• Estimated Assembly Time: 30-60 minutes.
• Tools Required (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Step Ladder, Eye Protection, Silicone Sealant.

Safety Precautions:

• RISK OF SHOCK: Turn off electricity at the circuit breaker box or main fuse box before installation.
• Ensure wire nuts/connectors are rated for the gauge and number of wires used.
• Avoid damaging wire insulation and sharp edges.
• WARNING: This product must be installed in accordance with applicable codes by a qualified person.
• CAUTION: Ensure your wall switch and main circuit breaker are both OFF.
• WARNING: Do not connect to an ungrounded electrical system. Attach the ground wire to the green ground screw or the ground wire in the outlet box. Failure to do so can result in electric shock.
• If unsure about electrical installation, consult a licensed electrician.

Installation Steps:

1. For wet locations, ensure the gap of the EVA gasket and mounting surface is filled with sealing compound or silicone glue.
2. Mount the bracket to the junction box (not included).
3. Connect the wires: BLACK (Live Wire) from fixture to BLACK (Live Wire) from house; WHITE (Neutral Line) from fixture to WHITE (Neutral Line) from house; GREEN (Ground Wire) from fixture to GREEN (Ground Wire) from house. Ensure secure connections using wire nuts.
4. Attach the light fixture to the mounting bracket.
5. Adjust the lamp heads to the desired angle.

Motion Sensor Orientation:

• The PIR sensor should be tilted slightly downward.
• The optimal orientation angle of the sensor is between 5°-45°.

Recommended Installation Height: 6.5-13.1 feet (2-4 meters) above the ground.

Detection Coverage:

• When mounted 8 feet above the ground with the sensor at a 5° downward angle, the maximum sensing distance is about 72 feet.
• When mounted 8 feet above the ground with the sensor at a 45° downward angle, the minimum sensing distance is about 19 feet.

Note: Detection distance is affected by ambient temperature. Sensitivity is higher when approaching from the side and lower when approaching directly.

How to Connect with Alexa and Google Assistant App

Tap 'Me' in the app, find the third-party voice device you want to connect to, and follow the on-screen instructions.

Troubleshooting

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.