Mondaine SBB stop2go WiFi Clock: Quick Start Guide

Getting Started

This guide provides essential steps for setting up your Mondaine SBB stop2go WiFi Clock. Follow these instructions to connect your clock to your WiFi network and ensure accurate timekeeping.

Setup Instructions

1. Remove the lid from the case back and insert two lithium AA batteries.
2. Press and hold both blue buttons for approximately 5 seconds to activate the search function.
3. On your mobile phone, navigate to your settings.
4. Access your WLAN (WiFi) settings.
5. Connect to the Mondaine WiFi Clock.
6. Select your preferred language from the available options.
7. Choose your WiFi network (SSID).
8. Enter your WiFi password.
9. Select your desired time zone.
10. Choose whether to display standard time or summer time.
11. Save your settings.
12. Wait for the app to confirm the connection: "Your Mondaine clock is connected."
13. Please note that the time setting process may take up to 2 minutes.

Function Description

• Stop2Go Function: The second hand completes a 360° rotation in 58.5 seconds and pauses at the 12 o'clock position for 1.5 seconds.
• Battery End of Life (EOL): If the hour and minute hands stop at 1:50, it indicates low battery voltage. Replace the battery with a new lithium or alkaline battery.
• WiFi Function: The WiFi clock supports 2.4GHz networks only.

Troubleshooting

Fault 1: If the clock hands move intermittently (stop briefly every 10 seconds), the battery may be insufficient. Replace the battery.

Fault 2: If the hands stop at 12 o'clock after network setup, it indicates a failed WiFi connection. Restart the process from step 1. Ensure your WiFi account and password are correct. You may need to reset the clock and try again.

Special Case for Settings: If the settings interface does not automatically appear after connecting to the clock's WiFi, check your phone's notification bar for a connection prompt and tap it. Alternatively, open your mobile device's internet browser, enter 192.168.4.1 in the URL field, and search. This should display the settings interface.

Additional Information

For more detailed information, please refer to the official Mondaine website or the full instruction manual.

Learn more about Mondaine clocks at Mondaine Official Website.