Mondaine Instruction Manual

Setting the Time

Normal Position: Position 1 (Crown fully pushed in).

To Set Time:

1. Pull the crown out to Position 2.
2. Set the desired time by rotating the crown.
3. Push the crown back to Position 1 to finish.

Visual Description: The watch face shows hour markers. The crown can be pulled out to Position 2, which is one click from the normal Position 1.

Setting the Date

Normal Position: Position 1 (Crown fully pushed in).

To Set Date:

1. Pull the crown out to Position 2.
2. Turn the crown to set the desired date.
3. Push the crown back to Position 1.

To Set Time:

1. Pull the crown out to Position 3.
2. Set the desired time by rotating the crown.
3. Push the crown back to Position 1.

Visual Description: The watch face shows hour markers and a date window. The crown can be pulled out to Position 2 (one click) for date setting or to Position 3 (two clicks) for time setting.

Setting the Day and Date

Note: If setting the date between 9:30 PM and midnight, set the date for the following day to ensure correct automatic change at midnight.

Normal Position: Position 1 (Crown fully pushed in).

To Set Date:

1. Pull the crown out to Position 2.
2. Rotate the crown clockwise to set the desired date.
3. Push the crown back to Position 1. (Refer to the red arrow indicator).

To Set Day of the Week:

1. Pull the crown out to Position 2.
2. Rotate the crown anticlockwise until the current day of the week appears in your desired language.
3. Push the crown back to Position 1. (Refer to the green arrow indicator).

To Set Time:

1. Pull the crown out to Position 3.
2. Set the desired time by rotating the crown.
3. Push the crown back to Position 1.

Visual Description: The watch face shows hour markers, a day window (e.g., "MON"), and a date window (e.g., "23"). The crown can be pulled out to Position 2 for date and day setting, or Position 3 for time setting. Red and green arrows indicate the direction for date and day setting respectively.

Setting the Big Date

Note: If setting the date between 9:30 PM and midnight, set the date for the following day to ensure correct automatic change at midnight.

Normal Position: Position 1 (Crown fully pushed in).

To Set Date:

1. Pull the crown out to Position 2.
2. Turn the crown to set the desired date.
3. Push the crown back to Position 1.

Important Note: The big date display uses two independent disks. On the first day of each month, you may need to manually reset the date from 31 to 01, potentially by advancing through 39.

To Set Time:

1. Pull the crown out to Position 3.
2. Set the desired time by rotating the crown.
3. Push the crown back to Position 1.

Visual Description: The watch face shows hour markers and a large date window displaying numbers. The crown can be pulled out to Position 2 for date setting or Position 3 for time setting.

Safety Warning

WARNING: KEEP THE BATTERY OUT OF REACH OF CHILDREN.

The battery can cause serious injuries if swallowed or placed inside any part of the body. Seek medical attention immediately.

Visual Description: A warning triangle with an exclamation mark and a battery symbol with a plus sign.