Legrand XL³ HP 160 Metal Distribution Cabinet

1. General Characteristics

The XL³ HP 160 cabinets are designed for energy distribution up to 160A. Constructed from metal, they are available in three configurations:

• Pre-equipped: Includes a removable chassis fitted with mounted rails, a vertical wiring circulation strap (one per row), a brass bar for protective conductors, and metal faceplates with a 1/4 turn lock.
• To be equipped: Features functional uprights for rail mounting and a brass bar support.
• External cable sleeve: Comprises two cut-out side panels for coupling with an XL³ HP 160 cabinet (pre-equipped or to be equipped, 6/7/8 rows). It also includes three perforated metal supports for terminal blocks and earth bars, and three inclined 45° supports for mounting.

These cabinets can accommodate flat metal doors, flat glass doors, or curved metal doors and are suitable for both commercial and residential installations.

2. Dimensions

2.1 Faceplates Details

For pre-equipped cabinets:

• Top and bottom faceplates have a height of 200 mm.
• Intermediate faceplates have a height of 150 mm.

[Diagram showing faceplate heights: H. 200 mm for top/bottom, H. 150 mm for intermediate, H. 200 mm for bottom section]

2.2 Cabinets Dimensions and Weights

[Diagram showing cabinet dimensions: H (height), L (width), A (depth), B (door opening angle 120°)]

2.3 Doors

Doors are supplied with a 1/4 turn handle and shutter. Handles can be fitted with interchangeable barrels (ordered separately).

[Text descriptions of door types: Flat metal door, Flat glass door, Curved metal door]

Distances from faceplate:

• Flat metal door: 38 mm
• Flat glass door: 34 mm
• Curved metal door: 57 mm

2.4 Cabinets Dimensions with Door and Handle

[Diagram showing dimensions for flat and curved doors, including door opening angle]

3. Technical Characteristics

3.1 Protection Index

• IP 30 with faceplate and without door, IP 40 with door, and IP 43 with door and gasket.
• IK 07 without door, IK 08 with door.

3.2 Material Characteristics

• Color: Grey RAL 7035, with Epoxy polyester powder coating (50/70 µm thickness).
• Galvanized steel rear panel: 10/10 mm thickness.
• Painted steel side/top/bottom panels: 10/10 mm thickness.
• Painted steel faceplate: 10/10 mm thickness.
• Metal door (flat/curved): 12/10 mm thickness.
• Glass door: 4 mm tempered glass with a 12/10 mm metal frame.
• Halogen-free.
• Self-extinguishing: 750°C.

3.3 Electrical Characteristics

• Rated operational voltage (Ue): 415 V AC - 50/60 Hz.
• Rated insulation voltage (Ui): 690 V AC - 50/60 Hz.
• Rated impulse withstand voltage (Uimp): up to 8 kV.
• Short-circuit current (Icc): 25 kA.
• Short-time withstand current (Icw): 12.5 kA for 0.1 second.
• Rated current (In): 160 A.

Thermal Dissipation Table

Maximum admissible current of 160 A with Delta T 30 K. Configuration: Rear surface in contact with a wall, all other surfaces free. Determined by testing according to IEC 61439-1 and IEC 62208-1.

3.4 Mechanical Characteristics

Permissible load: 40 N per row.

3.5 Climatic Characteristics

• Storage and installation temperature: -10°C to +70°C.
• Operating temperature: -5°C to +40°C.
• Must be installed under shelter.
• Corrosion resistance per IEC 61439.

4. Maintenance

Caution: For specific cleaning products, prior testing is required.

Surface cleaning with cloth.

Resistant to: hexane, methylated spirits, soapy water, diluted ammonia, 10% diluted bleach, glass cleaner, pre-impregnated wipes.

5. Standards and Regulations

• Compliant with NF EN / IEC 61439-2 and -3.
• RoHS: Absence, beyond admitted thresholds, of substances prohibited by EU Directive 2011/65/EU (RoHS), as modified by Delegated Directive 2015/863/EU, concerning the restriction of hazardous substances in electrical and electronic equipment.
• REACH: Substances identified as SVHC (Substances of Very High Concern) according to REACH Regulation (1907/2006), if present at a concentration above 0.1% weight by weight, are declared in the European SCIP database. As of this publication, no Annex XIV substances are found in this product.
• Packaging: Design and manufacture of packaging compliant with European Directive 94/62/CE.

6. Other Information

? Instruction sheet: Detailed mounting procedures available on e-catalog.

? Workshop book: Mounting information, equipment, accessories, and other details available on e-catalog.

? PEP (Product Environmental Profile): Available on e-catalog.

? XLPro4 Calcul: Calculation notes creation software for installers, design offices, and maintenance operators. Defines electrical characteristics of low voltage installations according to applicable standards.

? XLPro4 Panels: Distribution panel design software for panel builders and electrical panel designers. Facilitates the design of electrical distribution, production of diagrams, product selection, and project costing.

For more information, visit www.legrand.com.