TREASJÖN
IKEA Design and Quality
Important Safety Instructions
CAUTION!
RISK OF ELECTRIC SHOCK. TURN OFF THE POWER BEFORE INSTALLATION.
Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT INSTALLATION.
For indoor use only.
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
CAUTION!
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong cleaning agent.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.
INSTALLATION INSTRUCTIONS
CAUTION:
Before starting, turn off power at main circuit panel.
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
Assembly Steps
Tools Required: Two screwdrivers (Phillips and flathead).
Included Components:
- 1x Diffuser cover
- 1x Mounting rail
- 1x Power supply unit
- 1x LED light bar
- 1x Connecting cable
- 1x Small attachment plate
- 2x Mounting screws
- 1x Base mounting plate
Step 1: Prepare Light Bar
A person is shown holding the main LED light bar, indicating it is ready for installation.
Step 2: Position Light Bar on Cabinet
The LED light bar is placed on top of an open cabinet. An arrow indicates the direction of placement. A visual suggests consulting instructions or seeking help if unsure.
Step 3: Secure Light Bar
The light bar is secured to the cabinet using two screws. An inset shows a screw being driven into the cabinet top with a screwdriver.
Step 4: Attach Small Plate
A small attachment plate is affixed to the light bar assembly, with an arrow indicating its correct position and insertion.
Step 5: Connect Power Supply
The power supply unit is connected to the light bar. An inset shows a wire being inserted into a connector, with a mechanism to secure it.
Step 6: Route Cables
The power and connecting cables are routed along the cabinet structure. An inset shows cables being placed into a designated channel or clip.
Step 7: Secure Cables
Clips are used to fasten the routed cables. An inset shows a cable being snapped into a clip, with the audible cue "Click!" indicating successful fastening.
Step 8: Electrical Connections
Detailed diagram for electrical connections. Wires (Live/Phase, Neutral, Earth/Ground) are shown being prepared (stripped) and connected to the appropriate terminals. The multilingual labels are:
- English: Live / Français: Phase / Español: Con corriente
- English: Neutral / Français: Neutre / Español: Neutro
- English: Earth/Ground / Français: Terre / Español: Tierra
Three wires are shown being prepared for connection.
Step 9: Final Mounting
The light bar assembly is shown being fully attached to the cabinet, with screws inserted into the final mounting points.
