TREASJÖN Mirror Cabinet with 2 Doors and Light
IKEA Design and Quality
Important Safety Instructions
CAUTION! RISK OF ELECTRIC SHOCK. TURN OFF THE POWER BEFORE INSTALLATION.
Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT INSTALLATION.
For indoor use only.
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
CAUTION! The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong cleaning agent.
WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock.
INSTALLATION INSTRUCTIONS
CAUTION: Before starting, turn off power at main circuit panel.
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
Assembly Steps
Step 1: Identify required tools. Ensure you have a screwdriver (Phillips head recommended, flathead may also be needed). [Tool icon]
Step 2: Review the parts. Ensure all components are present before starting assembly. [Question mark icon] Consult the IKEA manual for a complete parts list. [IKEA logo]
Step 3: Attach mounting bracket. Secure the bracket to the wall using appropriate screws and wall plugs for your wall type. [Screw icon] (2x)
Step 4: Mount the main cabinet body. Align the cabinet with the mounting bracket and secure it. [Arrow icon]
Step 5: Connect the lighting components. Attach the light bar to the cabinet. [Arrow icon]
Step 6: Route the wiring. Carefully guide the wires through the designated channels. [Arrow icon]
Step 7: Secure the wiring. Ensure the wires are properly clipped into place. [Click sound icon]
Step 8: Connect the power. Identify the Live, Neutral, and Earth wires. Connect them to the corresponding terminals. [Electrical wire diagram with labels: Live/Phase/Con corriente, Neutral/Neutre/Neutro, Earth/Terre/Tierra]
Step 9: Finalize connections. Secure the main power cable to the cabinet. [Arrow icon]
Parts Included
- 1x Light cover
- 1x Mounting rail
- 1x Power supply unit
- 1x Main cabinet light bar
- 1x Light bar
- 1x Circular mounting plate (1x)
- Screws (2x)
Electrical Information
Live wire: Phase / Con corriente
Neutral wire: Neutral (with tracer) / Neutre (avec orientateur) / Neutro (con orientador)
Earth wire: Earth/Ground / Terre / Tierra
