Cudy WR1500 AX1500 Wi-Fi 6 Router Quick Installation Guide

Getting Started

Follow these steps to connect and set up your Cudy router.

1. Step 1: Prepare the Modem

   Turn off your modem. If your modem has a battery, remove it.

2. Step 2: Connect to the Modem

   Connect the WAN port of your Cudy router to your ISP modem using an Ethernet cable.

3. Step 3: Power On the Modem

   Turn on the modem and wait approximately 2 minutes for it to restart completely.

4. Step 4: Power On the Router

   Connect the power adapter to the router. Wait for the 'Power' system indicator light to turn solid on.

5. Step 5: Connect Your Device

   You can connect your device to the router using either Wi-Fi or a wired Ethernet connection.

   • A. Wi-Fi Connection: Connect your device to the router's Wi-Fi network. The network name (SSID) and password are printed on the bottom of the router. Look for a network name similar to 'Cudy-XXXX-5G'.
   • B. Wired Connection: Turn off the Wi-Fi on your computer. Connect your computer to one of the router's LAN ports using an Ethernet cable.

6. Step 6: Set Up the Router

   Open a web browser on your connected device and navigate to http://cudy.net/. Follow the on-screen instructions to complete the setup. This typically involves selecting an operating mode, setting the time zone, configuring the WAN interface, and setting up the wireless interface (SSID and password).

   The setup wizard will guide you through the process, which may include:

   • Operation Mode: Choose between Wireless Router, Wireless Access Point, etc.
   • Time Zone: Select your local time zone and optionally enable automatic time synchronization.
   • WAN Interface Setup: Configure your internet connection type if needed.
   • Wireless Interface Setup: Set your 5G and 2.4G Wi-Fi network names (SSID) and passwords.

   After completing the setup, a summary screen will display your configuration. Click 'Save & Apply' to finalize the settings. The router will reboot to apply the changes.

LED Indicators and Buttons

Understanding the status lights and buttons on your router:

• SYS LED: Indicates the system status. OFF: No power. Red Flash: Booting. Red: System error. Blue Flash: Working normally. Blue: WPS pairing.
• WPS Button: Used for Wi-Fi Protected Setup.
• RESET Button: Resets the router to factory default settings.

Enjoy the Internet!

Once the setup is complete and the router is functioning correctly, you can enjoy your internet connection.

EU Declaration of Conformity

Cudy declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU, Directive 2011/65/EU, and Directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce.

This declaration is available in multiple languages, including English, German, Spanish, Italian, French, Greek, Dutch, Portuguese, Polish, Turkish, Norwegian, Danish, Finnish, Swedish, Czech, Slovak, Hungarian, Romanian, Bulgarian, Lithuanian, Ukrainian, Croatian, Slovenian, Latvian, and Estonian.