Neo V2 Series Quick Guide

Heating On / Temperature Control

To make a temporary change to the temperature setting, press the Up or Down arrow keys, set your desired temperature, and then press the Checkmark key. If the set temperature is above the room temperature, a heating symbol will be displayed, indicating the heating is now on. This set temperature will be maintained until the next comfort level.

Heating Off / Frost Protection

To enable frost protection, use the Left or Right arrow keys to select the Frost Protection icon (❄️), then press the Checkmark key once. The Frost Protection symbol (❄️) will be displayed. In this mode, the heating will be turned off. However, if the temperature falls below your frost protection temperature, the heating will turn on. To return to your heating schedule, disable frost protection by using the Left or Right arrow keys to select the Frost Protection icon (❄️) and then press the Checkmark key. The Frost Protection symbol (❄️) will disappear.

Status Indicators: Heating on (?), Frost Protection On (❄️)

Setting The Clock

Use the Left or Right arrow keys to select the Clock icon (?), then press and hold the Checkmark key. Use the Right arrow key to select CLOCK, then press the Checkmark key. Use the Up or Down arrow keys to set the year, then press Checkmark. Repeat the steps to set the month, day, hours, and minutes. Use the Up arrow key to select the Clock icon (?), then press the Checkmark key to turn the display on. Note: The clock will automatically set when paired to the neoHub.

Editing Comfort Levels

Use the Left or Right arrow keys to select EDIT, then press the Checkmark key once. Use the Left or Right arrow keys to select the days to edit, then press Checkmark. WAKE will now flash; press the Checkmark key to edit the WAKE level. Use the Up or Down arrow keys to adjust the hours, then press Checkmark. Use the Up or Down arrow keys to adjust the minutes, then press Checkmark. Use the Up or Down arrow keys to adjust the temperature, then press Checkmark. Use the Left or Right arrow keys to select LEAVE, then press Checkmark. Repeat the steps above for the Leave, Return, and Sleep settings. For any levels that you do not want to use, adjust the time to --:--. To confirm changes and exit, use the Left or Right arrow keys to select DONE, then press Checkmark.