Yaesu FTX-1 Firmware Update Information
Date: 6/27/25 (Rev1)
Download the FTX-1 [FTX-1_USA_Firmware_Update_202506.zip] from the following website: Yaesu Product Detail Page
Contents of [FTX-1_Firmware_update_202506].zip:
- MAIN: FTX-1_MAIN V0105.SFL (6/27/25)
- DISPLAY: FTX-1_DISPLAY V0103.SFL (6/27/25)
- IF DSP: FTX-1_IF DSP V0102.SFL (6/27/25)
- SDR: FTX-1_IF DSP V0104.SFL (6/27/25)
- CTRL: SPA-1_CTRL_V0111.SFL (6/27/25)
Important: Please read the FTX-1 series Firmware Upgrade Manual.
Firmware Version Up Manual: Firmware_Ver_Up_Manual_ENG_FTX-1_2506-B.pdf
Implement improvements (06/27/25):
- Added APRS message function
- Supports ATAS-120A Auto Tune (FTX-1 optima)
- Displays the selected HF ANT connector number at the top of the screen
- Improved APRS Beacon reception sensitivity
- Fixed issue with GPS coordinates not being displayed correctly
- Improved NB characteristics
- Fixed issue with VOL volume not being adjustable while CW MESSAGE or VOICE MEMORY screen is displayed
- Fixed issue with SUB side receiving sound being output during SPLIT operation
- Fixed issue with SETTING MENU not being backed up to SD card properly
- Other minor fixes
Note: After installing the firmware completely, the FTX-1 must be reset. Refer to the FTX-1 series Operating Manual Page 79, or the Firmware_Ver_Up_Manual_ENG_FTX-1_2506-B.
Reset the transceiver
- Turn the transceiver OFF.
- While pressing the [BACK] and [FINE/FAST] keys simultaneously, then turn the transceiver ON. The frequency display will return to "144.000.000" (SUB-side), "7.000.000" (MAIN-side).
This completes the firmware upgrading process. If you already have the above firmware versions, it is not necessary to update the FTX-1 again.
Yaesu hopes this new firmware will increase your enjoyment of your FTX-1. For any problems or questions, please contact Yaesu Amateur Tech Support at amateurtech@yaesu.com.
Yaesu USA | 6125 Phyllis Drive | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100
Welcome to Yaesu
