Getting Started
Card Slot Operations
Follow these steps to manage your SIM and Micro SD cards:
- Step 1: Removing or Pushing in the Card Slot
Illustration showing how to open or insert a card into the device's slot.
- Step 2: Insert SIM Card
Diagram depicting the insertion of a SIM card into the phone's SIM tray.
- Step 3: Insert Micro SD Card
Diagram showing the insertion of a Micro SD card into the phone's Micro SD tray.
Charging and Powering On
- Step 4: Insert Type-C Cable to Charge
Visual representation of connecting a USB Type-C cable to the phone's charging port.
- Step 5: Power On and Run Initial Setup
Icon indicating the action to power on the phone and start the initial setup.
Device Overview
Familiarize yourself with the physical components of your Vortex PG65:
Side View
The side of the device features:
- Volume buttons (Volume + and Volume -)
- Power button
Front View
The front of the device includes:
- 5MP Front Camera
Rear View and Bottom/Top
The rear and edges of the device include:
- 5MP Main Camera
- Flash Lamp
- Speaker
- 3.5mm Audio Jack
- USB Type-C Port
- Microphone (MIC)
The device also has a slot for the SIM card and SD card.
Specifications
Basic Information
| Model | PG65 |
| Operating System | Android™ (Android is a trademark of Google LLC.) |
| CPU | 1.6Ghz Spreadtrum UMS8230 |
| RAM | 4GB |
| ROM | 64GB |
| Battery | 3000mAh |
Display
| Screen Size | 6.517" IPS SCREEN |
| Resolution | 1600x720 Pixels |
| Touch | Capacitive multi-touch |
Cameras
| Front Camera | 5MP |
| Rear Camera | 5MP |
Connection (I/O)
| GSM | 850/900/1800/1900 |
| WCDMA | 82/4/5/8 |
| LTE | 2/4/6/12/13/25/26/B41 (HPUE)/71 |
| WIFI | IEEE802.11 a/b/g/n/ac |
| Bluetooth | Bluetooth 5.0 |
| FM | YES |
| USB Port | Type-C USB |
Other Features
| Video File Format | MP4/AVI/MOV/MPEG4 |
| Audio File Format | MP3/AAC/AAC+/AMR-NB |
| Extend Support | TF card up to 512GB |
| Language Support | Multi-language |
| Sensor | G-Sensor, Accelerometer/Proximity Sensor |
In the box
- 1*Phone
- 1*USB-C Cable
- 1*Power Adaptor
- 1*Quick Start Guide
- 1*Battery
Safety Information
FCC Warning
15.19 Labeling requirements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
15.105 Information to the user: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Absorption Rate (SAR) Information
This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Safety Statement (Translated from French)
For body-worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with a leather case. The user must use this leather case. Use of other leather cases may not ensure compliance with FCC/ISEDC RF exposure guidelines.
For body-worn operation, this device has been tested and responds to FCC/ISEDC RF exposure directives when used with a leather case. Users must use this leather case. The use of other leather cases may not guarantee compliance with FCC/ISEDC RF exposure directives.
EU Member States Restriction
In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.
Made in China
