Sharkoon SKILLER SGK50 S4 GEN2 PBT Wood Keyboard Manual

Product Overview

This document provides a comprehensive manual for the Sharkoon SKILLER SGK50 S4 GEN2 PBT Wood keyboard. It covers specifications, safety guidelines, key functions, and maintenance instructions.

Specifications

General

Key Properties

Cable and Connectors

Package Contents

• SKILLER SGK50 S4 Gen2 PBT Wood
• Extra Keycaps
• Keycap Puller Tool
• Switch Puller Tool
• USB Cable (150 cm)

Safety Instructions

This device is intended as a keyboard for use with a PC. For your own safety, please read the instructions below before using the device. Damage due to improper use or non-compliance with safety instructions will void the manufacturer's guarantee.

CAUTION!

• Ensure the device is not damaged before use.
• Only use the device indoors in areas with normal humidity.
• Ensure the device does not come into contact with moisture or liquids.
• Only clean the device with a dry cloth.
• Connect this device only with compatible, intended cables and to other compatible, intended devices.
• The device does not contain any components that require maintenance. Opening the keyboard housing will result in the loss of the guarantee.

VIA/QMK Configuration

If VIA configuration is not possible through the website at https://usevia.app/, please use the alternative website at https://via.evove.top/.

Multimedia Keys

The following keys provide multimedia functions when pressed in combination with the 'Fn' key:

• Fn + Esc: Λ (This seems to be a placeholder or specific function, not a standard multimedia key)
• Fn + 1: !
• Fn + 2: "
• Fn + 3: §
• Fn + 4: $
• Fn + 5: %
• Fn + 6: &
• Fn + 7: /
• Fn + 8: (
• Fn + 9: )
• Fn + 0: =
• Fn + B: Delete
• Fn + N: Scroll Lock
• Fn + H: Page Down
• Fn + J: Page Down
• Fn + K: End
• Fn + L: Mute
• Fn + U: Home
• Fn + I: Pause
• Fn + O: Page Up
• Fn + P: Volume -
• Fn + [: Volume +
• Fn + ]: Volume +
• Fn + ;: Volume -
• Fn + ': Volume +
• Fn + F1-F12: Standard F1-F12 functions

Lighting Effects

Control keyboard lighting effects using the following key combinations:

• Fn + #: Brightness +
• Fn + ": Brightness -
• Fn + [: Change Color of Lighting Effect
• Fn + Strg: Change Lighting Effect

Macro Keys

Record Macros

To record macros, press and hold the 'Fn' key, then press the 'Tab' key. The macro keys 'B' and 'N' will start flashing. Press and hold the 'Fn' key again and press one of the macro keys ('B' or 'N') to select it for recording. Press and hold the 'Fn' key and then press the 'Caps Lock' key. The selected macro key will light up continuously, indicating it's ready for macro input. You can enter up to 16 individual actions. The recording ends automatically when the maximum number of actions is reached, or you can manually end it by pressing and holding the 'Fn' key and then pressing the 'Caps Lock' key.

Additional Functions

The following additional functions are available:

• Fn + Up Arrow: Up Arrow
• Fn + Left Arrow: Left Arrow
• Fn + J: Down Arrow
• Fn + K: Down Arrow
• Fn + L: Right Arrow
• Fn + Strg: Windows Key Locked

Remove Keycaps

To remove a keycap, place the arms of the keycap puller tool on the sides or top/bottom of the keycap. Pull upwards with careful but constant pressure. Avoid pulling keycaps directly with your fingers, as this may damage the switch.

Remove Switches

After removing the keycap, position the switch puller tool on the front and back tabs of the switch. Ensure both tabs are securely pressed. The switch should remove without resistance. If needed, remove adjacent keycaps for better access. Press both tabs of the switch with the puller tool and pull the switch vertically upwards from the socket. Avoid pulling in a slanted direction to prevent damage.

Install Switches

Position the switch so one tab is at the front and the other at the back. Align each pin on the underside of the switch with its corresponding contact in the keyboard socket. Insert the switch vertically into the socket opening at a 90-degree angle. Incorrect installation can damage the switch. After placing the switch, gently push it to secure it. Do not use excessive force, as this can damage fragile components.

Note

Legal Disclaimer

Sharkoon assumes no liability for potential loss of data, especially due to inappropriate handling. All product names and descriptions are trademarks or registered trademarks of their respective manufacturers and are protected. Sharkoon's policy of product improvement means design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved, including translation, reprinting, and reproduction by any technical means. Infringements may lead to compensation. All rights reserved, especially regarding patent or utility patent assignments. Delivery and technical modifications are reserved.

Disposal of your old products

Your product is designed and manufactured with high-quality, recyclable materials. The crossed-out wheeled bin symbol indicates that the product is covered by the European Directive 2012/19/EU. Please follow local regulations for separate collection of electrical and electronic products. Do not dispose of old products with household waste, as correct disposal helps prevent negative consequences to the environment and human health.

Follow us on social media!

• Facebook
• Instagram
• YouTube
• TikTok
• X

Sharkoon Technologies GmbH

Grüninger Weg 48
35415 Pohlheim
Germany

© Sharkoon Technologies 2025

CE FC EAC RoHS