Sharkoon SKILLER SGK50 S4 GEN2 PBT Keyboard Manual

Specifications

Safety Instructions

This device is intended as a keyboard for use with a PC. For your own safety, be sure to read the instructions below before using the device. If the product is damaged due to improper use or non-compliance with the safety instructions, the manufacturer's guarantee will be void.

CAUTION!

• Ensure that the device is not damaged before use.
• Only use the device indoors in areas with normal humidity.
• Ensure that the device does not come into contact with moisture or liquids.
• Only clean the device with a dry cloth.
• Connect this device only with compatible, intended cables and only to other compatible, intended devices.
• The device does not contain any components that require maintenance. Opening the keyboard housing will result in the loss of the guarantee.

VIA/QMK Configuration

If VIA configuration is not possible through the website at https://usevia.app/, please then use the alternative website at https://via.evove.top/.

? Information regarding VIA/QMK configuration.

Multimedia Keys

The following functions can be accessed using the Function (Fn) key, typically represented by the Sharkoon logo.

Keyboard Layout Overview: The keyboard features a 60% layout. Modifier keys include Strg (Ctrl), Alt, and Alt Gr. The Function key (Fn) is usually located where the Windows key is on larger keyboards.

• Fn + Esc: Maps to symbol `Λ`.
• Fn + Shift + Esc: Maps to symbol `o`.
• Fn + 1: Activates F1 - F12 keys.
• Fn + Backspace: Delete key.
• Fn + Z: Insert key.
• Fn + O: Pause key.
• Fn + P: Page Up key.
• Fn + Ü: Home key.
• Fn + Print Screen: Print Screen key.
• Fn + H: Scroll Lock key.
• Fn + Ö: Page Down key.
• Fn + Ä: End key.
• Fn + M: Mute audio.
• Fn + ;: Decrease volume.
• Fn + .: Increase volume.

Lighting Effects

Control the keyboard's RGB lighting effects using the Function (Fn) key.

Keyboard Layout Overview: Modifier keys include Strg (Ctrl), Alt, and Alt Gr. The Function key (Fn) is typically represented by the Sharkoon logo.

• Fn + #: Increase brightness.
• Fn + -: Decrease brightness.
• Fn + [ ]: Change color of lighting effect.
• Fn + Strg: Change lighting effect mode.

Macro Keys

The SKILLER SGK50 S4 Gen2 PBT keyboard supports on-the-fly macro recording and assignment to dedicated keys.

Macro Key Assignment: Press Fn + B or Fn + N to designate these keys as macro keys.

Setting Up Macros

To record a macro:

1. Press and hold the Function key (Fn), then press the Tab key. The macro keys (B and N) will start flashing.
2. Press and hold the Function key (Fn) again, then press either the B or N key to select it for macro recording.
3. Press and hold the Function key (Fn) again, then press the Caps Lock key. The selected macro key will light up continuously, indicating it is ready for recording.
4. You can now input your macro actions (up to 16 individual actions).
5. The recording automatically ends when the maximum number of actions is reached, or you can manually end it by pressing and holding the Function key (Fn) and then pressing the Caps Lock key.

Additional Functions

Access additional functions and system controls using the Function (Fn) key.

Keyboard Layout Overview: Modifier keys include Strg (Ctrl), Alt, and Alt Gr. The Function key (Fn) is typically represented by the Sharkoon logo.

• Fn + [ ]: Activates Up Arrow function.
• Fn + J: Activates Left Arrow function.
• Fn + K: Activates Down Arrow function.
• Fn + L: Activates Right Arrow function.
• Fn + Windows Key: Locks the Windows key to prevent accidental presses during gaming.

Keycap Removal

Before removing a switch, the keycap must be removed first.

Procedure:

1. Take the keycap puller tool.
2. Place the arms of the keycap puller tool either to the left and right, or to the top and bottom of the keycap.
3. Pull the keycap upwards with careful but constant pressure.

Whenever possible, avoid pulling the keycaps directly with your fingers, as this may damage the switch.

Switch Removal

Instructions for safely removing keyboard switches.

Procedure:

1. Ensure the keycap has been removed from the switch.
2. Position the switch puller tool correctly on the tabs of the switch. These tabs are located at the front and back of the switch.
3. Before pulling, ensure both tabs are securely pressed by the switch puller tool. The switch should be removable from its socket without resistance.
4. If necessary, remove adjacent keycaps to provide sufficient freedom of movement for the switch puller tool.
5. Press both tabs of the switch with the switch puller tool and then slowly pull the switch out of the socket.
6. Always pull vertically from the socket with a straight, upward direction. Avoid pulling in a slanted direction, as this can result in damage.

Switch Installation

Instructions for installing keyboard switches.

Procedure:

1. Position the switch so that one tab is at the front and the other tab is at the back.
2. Ensure each pin on the underside of the switch is pointing exactly to its relevant contact in the keyboard socket.
3. Lead the switch vertically into the socket opening, at a 90-degree angle to the socket.
4. Installing the switch incorrectly can lead to damage or malfunction of the switch.
5. After placing the switch in its socket, push very gently on the switch to secure it in place. Avoid using excessive force, as this can damage or destroy fragile components.

Note

Legal Disclaimer

For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.

Disposal of your old products

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

♻️ When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU.

Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.

Follow Us

Follow Sharkoon on social media:

• f Facebook
•  Instagram
• ▶️ YouTube
• ? TikTok
• ❌ X

Sharkoon Technologies GmbH

Grüninger Weg 48
35415 Pohlheim
Germany

© Sharkoon Technologies 2025

Certifications: CE, FC, EAC, RoHS