Outsunny 845-031GY Storage Shed Kit Assembly Instructions

Assembly Preparation

Please check local building codes regarding footings, location and other requirements before beginning construction. Study and understand this owner's manual for important information and helpful tips for easier and more enjoyable assembly.

Assembly Instructions

Reviewing all instructions and the appropriate information before you begin, make sure to follow the step sequence carefully for successful results.

Flooring Base

Your storage building must be anchored to prevent wind damage and may be necessary to construct a square and level building. The base is not included in the kit, which may need purchase separately or you may construct a foundation and anchoring system of your own. A good location for the storage building is a level area with good drainage.

Parts and Parts List

Check to be sure that you have all the necessary parts for your building.

Tools You Need

(Please tear off the safety protection layer before assembly, keep the part number label if needed)

Safety First

1. Select a dry and calm day for your assembly. Teamwork (Two or more people) is required during assembly.
2. Wear safety gloves, eye protection, and long sleeves during assembly to prevent injury. Pay attention to the sharp edges of some parts.
3. Children and pets are not allowed to enter the construction site.
4. Never concentrate your total weight on the roof of the building. When using a step ladder, make sure it is safe.

Care & Maintenance

1. Keep the shed clean with a soft cloth; use water if necessary.
2. Keep the door tracks clear of dirt and other items that prevent them from sliding easily.
3. Clean the snow with necessary tools to ensure it is safe to enter. Heavy snow may cause collapse; please ensure safety before entering.
4. The shed is not made for living but for storing items.