Yaheetech Twin Minimalist Metal Platform Bed Assembly Instructions
Important Information & Warnings
People Required: ??? We recommend 2 or more people to install.
Estimated Assembly Time: ⏰ 0.5 hours.
Child Safety: ?? Not intended for use by children.
Heat Warning: ?❌ Keep away from fire or other heat sources.
Protective Gear: ?✔️ We recommend wearing protective gloves.
Assembly Advice
Please follow the instruction manuals and use a protective pad to avoid damage during assembly. [Illustration: One panel shows a person placing a box on a surface with a red cross (❌) over it, implying damage. The second panel shows a person placing the box on a protective pad with a green checkmark (✔️) over it, implying protection.]
Parts List
| Item | Part Identifier | Quantity | Description/Dimensions |
|---|---|---|---|
| 1 | [Long rod with holes] | x2 | |
| 2 | [Shorter rod with holes] | x2 | |
| 3 | [Decorative metal panel] | x2 | |
| 4 | [Vertical metal support] | x2 | |
| 5 | [Long rod with holes] | x2 | |
| 6 | [Long rod with holes] | x2 | |
| 7 | [Central support beam] | x1 | |
| 8 | [Thin metal rod] | x10 | |
| 9 | [Thin metal rod] | x1 | |
| A | [Bolt] | x4 | M8*65mm |
| B | [Bolt] | x4 | M8*35mm |
| C | [Bolt] | x10 | M6*60mm |
| D | [Bolt] | x4 | M6*40mm |
| E | [Bolt] | x4 | |
| F | [Cylindrical connector/cap] | x4 | |
| G | [Nut] | x4 | |
| H | [Washer] | x4 | |
| I | [Washer] | x14 | |
| J | [Tool set: Allen wrench and small wrench] | x1 |
Assembly Steps
Step 1
Attach parts 1 (x2), 3 (x1), and 9 (x1) using part C (x6) screws. [Diagram: Shows two side rails (1), a headboard decorative panel (3), and a connecting rod (9) being joined with screws (C) and washers (I).]
Instruction: During assembly, please first half-tighten all screws into the holes. After all screws are set, fully tighten them.
Step 2
Attach parts 2 (x2) and 3 (x1) using part C (x4) screws. [Diagram: Shows two side rails (2), a footboard decorative panel (3) being joined with screws (C) and washers (I).]
Instruction: During assembly, please first half-tighten all screws into the holes. After all screws are set, fully tighten them.
Step 3
Connect parts 4 (x2), 5 (x2), and 6 (x2) using parts B (x4) screws and G (x4) nuts. Also use parts E (x4) and F (x4). [Diagram: Shows the main frame components (4, 5, 6) being connected with bolts (B), nuts (G), and other fasteners (E, F).]
Instruction: During assembly, please first half-tighten all screws into the holes. After all screws are set, fully tighten them.
Step 4
Attach part 7 (x1) using parts D (x4) screws and H (x4) washers. [Diagram: Shows the central support beam (7) being attached to the frame using screws (D) and washers (H).]
Note: Do not tighten screws completely at this step.
Step 5
Attach parts 1 (x4) and 2 (x2) to the frame using parts A (x4) screws, F (x4) connectors, and I (x4) washers. [Diagram: Shows the headboard and footboard posts (1, 2) being attached to the main frame using screws (A), connectors (F), and washers (I).]
Note: Do not tighten screws completely at this step.
Step 6
Install part 8 (x10) support rods. [Diagram: Shows the ten support rods (8) being placed across the frame.]
Note: Tighten all screws completely after assembly.
Customer Support & Product Information
If you are not entirely satisfied with your purchase, please feel free to contact us using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
Product Information:
Manufactured in PRC for Yahee GmbH.
Importer: Yahee GmbH
Höpfigheimer Straße 11.7
4321 Bietigheim-Bissingen
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
