Joie Change Changer
Suitable for: birth to 11 kg (0 - 12 months)
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
In case of emergency or accident, immediately seek medical attention for your child.
Product Information
Read all the instructions in this manual before using this product. If you have any further questions, please consult the retailer.
Product: Change
Suitable for: Discontinue using changer when child reaches 11 kg (approximately 0 - 12 months) or is able to climb out.
Materials: Plastics, metal, fabrics
Patent No.: Patents pending
Made in: China
Brand Name: Joie
Website: www.joiebaby.com
Parts List
Make sure all parts are available before assembly. If any part is missing, please contact local retailer. No tools are required for assembly.
- 1.1 Changer
- 1.2 Soft Goods
- 1.3 Support Tube (X2)
- 1.4 Support Plastic Assembly (X2)
(Refer to images for part identification)
Warnings
- Adult assembly required.
- Please save instruction manual for future reference.
- You must follow the instructions in this manual when using the product.
- Discontinue using changer when child reaches 11 kg (approximately 0 - 12 months) or is able to climb out or sit unaided.
- DO NOT make any modifications to this changer or use it with component parts from other manufacturers.
- Any additional or replacement parts shall only be obtained from the manufacturer or distributer.
- DO NOT use the product if any parts are broken, torn or missing.
- DO NOT leave the child unattended. Always keep your child in view.
- Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the changing unit.
- To avoid strangulation, DO NOT place items with a string around your child's neck, suspend strings from this product.
- All assembly fittings should be unfolded completely and tightened properly before using the product.
- Regularly check and retighten as necessary the locks and fittings for security.
- Regularly inspect the product for damaged hardware, loose joints, missing parts or sharp edges.
- To avoid suffocation, remove plastic bag and packaging materials before using this product. The plastic bag and packaging materials should then be kept away from babies and children.
- This product is not intended for prolonged periods of sleeping.
- It is dangerous to use this product on an elevated surface e.g. a table.
- Do not use accessories or replacement parts other than those approved by the manufacturer.
- Please remove unused changer from travel cot to avoid hurting child as misusing.
Lift Off Changer Assembly
The changer can be used independently.
Assembly Steps:
- Step 1: Identify all parts (Changer, Soft Goods, Support Tubes x2, Support Plastic Assemblies x2).
- Step 2-5: Assemble the main changer unit by connecting the support tubes and plastic assemblies. Ensure parts click securely into place.
- Step 6-10: Attach the assembled changer to a compatible travel cot or bassinet. Ensure all connections are secure.
(Refer to images 1-10 for detailed visual guidance.)
Care and Maintenance
- Your product can be spot cleaned with a sponge and soapy water.
- Do not use undiluted neutral detergent, gasoline or other organic solvent to wash the product. It may cause damage to the product.
- From time to time, check your product for worn parts, torn material or stitching. Replace or repair the parts as needed.
- If the product is not in use for a long period of time, please put it in the shade where your child cannot access it.
