Joie Excursion Travel Cot

Welcome to Joie

Congratulations on becoming part of the Joie family! This manual provides instructions for the Joie Excursion Travel Cot, approved to AS/NZS 8811.1:2013 and AS/NZS 2195:2010+A2:2015. This product is suitable for children weighing under 15kg (approximately 0-4 years). Please read and follow all steps carefully to ensure a comfortable sleeping environment and the best protection for your child.

Please keep this Instruction Manual handy for future reference. Visit joiebaby.com to download manuals and see more Joie products. For warranty information, visit joiebaby.com.

Emergency

In case of emergency or accident, ensure your child receives immediate first aid and medical treatment.

Product Information

• Product: Excursion Travel Cot
• Suitable for: Birth to 15kg (approximately 0-48 months)
• Accessory A (Changer): Suitable for use until child reaches 11kg (approximately 0-12 months) or is able to climb out.
• Accessory B (Rocker): Suitable for use until child reaches 9kg (approximately 0-6 months) or is able to climb out.
• Materials: Plastics, metal, fabrics
• Patent No.: Patents pending
• Made in: China
• Brand Name: Joie
• Website: www.joiebaby.com

Parts List

Verify all parts are available before assembly. Accessories may be sold separately or vary by region. Contact your local retailer if any part is missing. No tools are required for assembly.

• 1 Travel Cot
• 2 Mattress
• 3 Carry Bag
• 4 Support Tube
• 5 Bassinet
• 6 Corner
• 7 Long Rail
• 8 Short Rail
• 9 Zipper
• 10 Latch Button
• 11 Foot
• 12 Folding Webbing
• 13 Foot
• 14 Soft Goods (Changer)
• 15 Support Tube (X2)
• 16 Support Plastic Assembly (X2)
• 17 Soft Goods (Rocker)
• 18 Support Tube (X2)
• 19 Canopy
• 20 Flathead Screwdriver (Not Included)
• 21 Vibration Box
• 22 Support Plastic Assembly (X2)

Important Safety Warnings

WARNING:

• USE ONLY THE MATTRESS SUPPLIED BY THE MANUFACTURER; INCORRECT MATTRESSES CAN CAUSE DEATH.
• Use Only Accessories As Recommended By The Supplier.
• Ensure The Top Rails And Base Are Fully Locked.
• Do Not Use This Cot If Any Part Of The Cot Is Broken, Torn Or Missing.
• TO PREVENT FALLS, THE BASSINET MUST NOT BE USED ONCE A CHILD CAN SIT UP.
• THIS BASSINET SHOULD BE REMOVED BEFORE THE CHILD CAN SIT UP.
• NEVER PLACE A CHILD IN THE COT WHEN THIS BASSINET IS IN PLACE.
• Keep children away while assembling/disassembling the cot.
• Do not leave anything on the folding cot (such as toys) that provide a foothold.
• Do not use the folding cot near naked heat sources, bar heaters, open fires or exposed flames.
• Keep the folding cot clear of trailing cables and hanging cords.
• Keep medication and small items that a child could choke on, away from the cot.
• The folding cots with padded rims should not be used if the covering material has been bitten through.
• All assembly fittings should always be tightened properly and checked regularly.
• NEVER LEAVE CHILD UNATTENDED. Always keep your child in view.
• Always use on a flat, level floor.
• Only use the mattress sold with this cot; do not add a second mattress as this poses suffocation hazards.
• To avoid suffocation, remove plastic bag and packaging materials before use. Keep these away from babies and children.
• Check that the assembly is correct and safe.
• Check that the locking devices are fully engaged.
• Carry out assembly in the specified order.
• Secure, tighten, and maintain all fastening devices.
• The bassinet cannot be used separately; it needs to be used with the mainframe.
• NEVER PLACE A CHILD IN THE COT WHEN THE CHANGE TABLE IS IN PLACE.
• ALWAYS USE THE HARNESS WHEN USING THE CHANGE TABLE.
• Battery warnings apply to any battery-operated features (e.g., Rocker vibration).
• Never leave the child unattended.
• Do not use the reclined cradle once your child can sit unaided.
• This reclined cradle is not intended for prolonged periods of sleeping.
• It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
• Always use the restraint system.
• This reclined cradle does not replace a cot or a bed.
• Do not use the reclined cradle if any components are broken or missing.
• Do not use accessories or replacement parts other than those approved by the manufacturer.
• The Rocker should not be used for sleeping.

Travel Cot Assembly

Please read all instructions before setting up and using the product.

1. Pull the short rails up until both become rigid. If not rigid, pull up again until they are rigid. (See Figures 1-4)
2. Latch the long rails. (See Figures 5-8)
3. Push the base of the floor down. Ensure all rails have locked before lowering the base. (See Figures 5-8)
4. Assemble the support tubes. (See Figures 18-21)
5. Install mattress, soft side up. (See Figures 19, 21)
6. Secure the mattress: Pull the strap through the button hole on the bottom of the travel cot. Wrap the strap around the tube and fasten the snaps. Repeat on the other corners. Push down on all four corners of the mattress to ensure it is secured to the bottom of the travel cot. (See Figure 6)
7. The cot can be used when the installation mode is correct.

Take care and pay attention when assembling the cot to prevent injury.

Fold Travel Cot

1. Remove the mattress. (See Figures 8-9)
2. Remove support tube as shown in Figure 21.
3. Pull the folding webbing upward. (See Figures 10-11)
4. Unlock all four rails: Slightly lift the base, then squeeze the latch button on the rail to release the two tubes. (See Figure 12)
5. Fold the unit. Do not force the fold. If the unit will not fold, look for a partially latched rail and squeeze the latch button to release it. (See Figures 13-14)

Take care and pay attention when folding the cot to prevent injury.

Cover Travel Cot

1. Cover the unit with the carry bag. (See Figure 15)
2. Zip together. (See Figure 16)

Bassinet Assembly

Tip: Before setting up the bassinet, make sure all rails have become rigid.

1. Zip up the bassinet and secure the zipper head with the buckle, then cover it with the flap. Ensure the bassinet is zipped completely without any crevice before using. (See Figure 17)
2. Assemble the support tubes. (See Figure 18)
3. Place the mattress into the bassinet, soft side up. (See Figure 19)
4. The installed bassinet is shown in Figure 20.
5. The bassinet can be used when the installation mode is correct.
6. Remove support tube as shown in Figure 21.

Take care and pay attention when assembling and removing the bassinet to prevent injury.

Changer Assembly

The Changer can be used independently. It can be used when the installation mode is correct.

Take care and pay attention when assembling and removing the Changer to prevent injury.

(See Figures 22-30 for detailed assembly steps.)

Rocker Assembly

The Rocker can be used independently. It can be used when the installation mode is correct.

Take care and pay attention when assembling and removing the Rocker to prevent injury.

• Recommended batteries: alkaline disposables, size D-LR20 (1.5V). NEVER mix battery types.
• To use the integrated vibration module, slide the button to the left or right for high or low speed.
• Vibration feature may not be available depending on the model.
• Batteries not included.
• The Rocker should not be used for sleeping.

(See Figures 31-46 for detailed assembly steps.)

Care and Maintenance

1. The covering material is not removable.
2. Your travel cot can be spot cleaned with a sponge and soapy water.
3. Do not use undiluted neutral detergent, gasoline, or other organic solvent to wash the travel cot, as it may cause damage.
4. To wash the carry bag, machine wash in lukewarm water and drip-dry. Do not use bleach.
5. At the beach or in the garden, clean sand and grit off your travel cot. Sand in the long rail locks may cause damage.
6. From time to time, check your travel cot for worn parts, torn material, or stitching. Replace or repair parts as needed.
7. If the travel cot is not in use for a long period of time, please store it in a shaded place where your child cannot access it.

Contact Information

Nuna Baby Australia Pty Ltd.

Unit 1, 35 Lyn Parade Prestons, NSW Australia 2170

Share the joy at joiebaby.com