JVC LED Display Users Guide
Model: AV-H323115A
32" Class
Table of Contents
Warning and Precautions
Warning: Risk of electric shock, do not open. To avoid the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT.
- Operate only from the power source specified on the unit.
- Avoid damaging the AC plug and power cord.
- Avoid improper installation and never position the unit where good ventilation is unattainable.
- Do not allow objects or liquid to fall into the cabinet openings.
- In the event of mechanical damage, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
When you don't use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety.
To prevent electric shock do not use this power plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Do not attempt to service the product yourself
Caution
To prevent electrical shock, do not open the TV casing. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this unit near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc. There must be a minimum distance of 5cm clear space around the unit at all times to ensure proper ventilation.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. No naked flame sources such as lit candles, should be placed on or near the unit.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the unit.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-over.
- Unplug this unit during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally or has been dropped.
- The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the unit.
- Place the television on a stable, flat surface. Failure to do so can result in the television falling, causing injury.
- Do not allow young children to play around or on the television. Do not hang from the unit. Failure to do so can result in the television falling, causing injury.
- Do not allow young children to play with the plastic bag that came with the television when you unpacked it. Failure to do so can result in suffocation, which may lead to death.
- Avoid improper installation and never position the unit where good ventilation is impossible. When installing this unit, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation.
- Cautions for installation
- Do not tilt the unit left, right or towards the back.
- Ensure the power cord is out of the path of foot traffic.
- The unit will generate a slight amount of heat during operation. Ensure that sufficient space is available around the unit to allow satisfactory cooling.
- Have two people remove the unit from the box with the screen facing away from you. It's possible your clothing (such as a belt buckle or button) may scratch the front of the unit. Do the same when moving the unit to another location.
- Make enough room for inserting and removing the power plug. Place the unit as close to the outlet as possible. The main power supply for this unit is controlled by inserting or removing the power plug. Physically disconnecting the power plug is the only way to completely disconnect the unit from the mains power source.
- Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
- When this unit is connected to the wall outlet, it is always on standby even when all the LED lamps are not lit. To shut down the unit, unplug the unit from the wall outlet.
- If the supply cord is damaged, it must be replaced before further use by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
- Always place the TV on furniture that can safely support the TV. Make sure the ends of the TV do not hang over the edge of the supporting furniture.
- Do not place the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a wall or other suitably strong support.
- Do not stand the TV on cloth or other materials placed between the TV and the supporting furniture.
- Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
Warnings and Cautions
- Warning: High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.
- Caution: Do not trap the power supply cord under the television receiver.
- Warning: To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
- Caution: Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.
- Warning: Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
- Caution: Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.
- Caution: When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
- Caution: Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.
- Caution: If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.
Technical Specifications
Specification | Value |
---|---|
Viewing Picture Size (Diagonal) | 32" |
Resolution | 1366 x 768 |
Aspect Ratio | 16 : 9 |
Brightness | 200cd/m² |
Contrast Ratio | 3000:1 |
TV System | PAL-B/G, I, D/K SECAM-B/G, D/K, L DVB-T, DVB-T2 |
Input Power Voltage | AC 100-240V 50/60Hz |
Power Consumption | 48W |
Audio Output Power (THD≤10%) | 2x8W |
Signal Input | High-Definition Multimedia Interface (HDMI) x 3 AV IN x 1 RJ45 x 1 USB x 2 ANT x 1 |
Signal Output | HEADPHONE x 1 OPTICAL x 1 |
Unit Size | 722x180x468mm |
Unit Size (Without Stand) | 722x62x426mm |
Net Weight | 4.2KG |
Installation
General Installation Advice:
- Locate the TV where light does not shine onto the screen. Total darkness or reflection on the screen can cause eyestrain. A soft lighting environment is recommended for comfortable viewing.
- Allow ample space between the TV and wall for proper ventilation.
- Do not locate the TV in a damp or hot environment to prevent damage.
- To prevent damage whilst in use, do not cover ventilation openings.
Base Stand Assembly Instruction:
Place the TV with the display side down on a flat surface. Ensure the table or desk you use provides a flat, totally clean surface and use a soft cloth between the face of the TV and the table to protect the TV's screen.
- Place the TV face down on a cloth or towel on a flat surface. Insert the stands into the grooves on the bottom of the TV, then align the screw holes on the bottom of the TV and the stands.
- Use the 4 provided screws (M4X12MM) to attach the stands to the TV.
Wall Mount Specifications:
Compatible wall-mount size: VESA 200 * 100
Screw size for connecting the TV to the wall mount: Pan Head Screw M4 x 6 (mm)*
*The length of the screw specified is only a recommendation; actual length required can vary depending on the type of wall mount used.
Note:
- Wall Mount is not included with the TV; it needs to be purchased separately.
- Use only VESA-compatible wall mounts according to the specifications recommended for this model. Use of other wall mounts, or inappropriate installation may cause personal injuries or damage to the TV.
- Please follow all instructions from the user manual of your chosen wall mount.
Front Panel Description:
The control buttons on the TV are located on the bottom of the TV near the LED indicator.
- 1: Remote control sensor
- 2: Indicator LED (RED STANDBY)
- 3: Keyboard
Control Key Functions:
- ▲: Select the next channel or move up.
- ▶: Increase the volume level or move right.
- ◀: Decrease the volume level or move left.
- ●: When TV is on standby, press to turn on. When TV is on, press to enter the menu. Use the joystick to navigate around the interface and press to enter the highlighted item. When TV is on, press and hold to put TV on standby.
- ▼: Select the previous channel or move down.
Rear AV Connections:
- 1: RJ45: Connect the Network Interface.
- 2: OPTICAL: Optical Digital Audio output.
- 3: USB: Plug in your USB memory device (e.g. USB stick) to play compatible files that are stored in it.
- 4: HDMI: Connect to the HDMI output jack of up to 4 external video sources (e.g. DVD player / games console / bluray player).
- 5: AV IN: Connect to the AV OUT jack of your external video source device (e.g. DVD player).
- 6: ANT: Connect the antenna or 75 Ohm coaxial cable to receive TV signal.
Rear AV Connections (Side):
- 3: USB: Plug in your USB memory device (e.g. USB stick) to play compatible files that are stored in it.
- 4: HDMI1 (ARC): Connect to the HDMI output jack of up to 4 external video sources (e.g. DVD player / games console / bluray player).
- 7: HEADPHONE: Connect headphones here. Note that connecting headphones will mute the sound from the TV's built-in speakers.
Antenna Connection:
Connect the ANT terminal on the back of the TV to a good quality outdoor antenna.
Note: Aerial connections: IEC (female). Input impedance: 75 Ω unbalanced.
Preset Mode (HDMI) Table:
Resolution | V.Freq.(Hz) |
---|---|
1. 640*480 | 50/60 |
2. 800*600 | 50/60 |
3. 1024*768 | 50/60 |
4. 1360*768 | 50/60 |
5. 1280*768 | 50/60 |
6. 1920*1080 | 50/60 |
AV Equipment Connection:
You can use the input terminals on the TV set rear as follows:
Diagram shows connections for Audio Receiver and Audio/Video machine with HDMI interfaces. It can be connected to appliances like VCR, multi disc player, DVD, camcorder, video game, stereo system, etc.
Remote Control
The remote control uses 2 x 'AAA' batteries (included). Please ensure correct polarities when inserting batteries.
This is a Bluetooth remote control. In order to use all its features including voice control, please pair it with the TV as explained in 'Initial Setup'.
Remote Control Buttons and Functions:
- POWER: Press to set the TV to Standby or Power On modes.
- INPUT: Press to select the different input signal sources.
- NETFLIX: Press to open NETFLIX.
- YouTube: Press to open YouTube.
- REC (Record): Press to start recording DTV Channel (must have USB drive inserted).
- STOP: Press to stop multimedia playback.
- MUTE: Press to disable or enable the speaker sound output.
- ◀ (Reverse): Press to reverse playback rapidly.
- ▶▶ (Forward): Press to advance playback rapidly.
- ▶II (Play/Pause): Press to start/pause playback.
- TEXT: Press to select the teletext mode. (Note: Teletext functions are not available in Australia.)
- GUIDE: Press to display electronic programme guide in TV mode.
- ASPECT: Adjust Aspect ratio of the TV.
- Navigation Arrows (▲/▼/◀/▶): Press to navigate the on-screen menu.
- OK: Press to confirm selection.
- BACK: Press to return to the previous menu.
- MENU: Press to open or close the on-screen menu.
- HOME: Press to open the Home Page.
- VOL+/-: Press to adjust sound level.
- CH+/CH-: Press to access the next or previous channels.
- Google Assistant Button: Activate Google Assistant voice command function. See next page for pairing instructions.
- NUMERIC KEY: For direct access to channels.
- INFO: Press to display channel information.
- Last Channel Button: Press to jump to last channel viewed.
- Coloured buttons (Red, Green, Yellow, Blue): Press to implement the relevant operations according to the prompt at the bottom of the menu in the text.
Operation
Initial Setup Wizard:
When you turn on your TV for the first time, the setup wizard will guide you through setting up basic settings. Follow the on-screen instructions.
Language Selection: Press ▲/▼ to select the system language and press OK to confirm.
Google Terms of Service: Accept the Google Terms of Service to improve the product experience, select "Accept".
Location Settings: Allow Google to get the location information of your device to access more features, choose "YES" to accept.
Help Improve Android: Allow to automatically send diagnostic information to Google. Choose "YES" to accept.
Remote Control Pairing:
This step pairs the Bluetooth remote control with your TV. Follow on-screen instructions. Select and click OK when the remote control code 'BT_VoiceRC_M3' appears. If pairing is successful, you can use the Bluetooth remote. Press BACK to skip if not needed.
Quick Setup with Android Phone:
You can easily transfer your Android phone's Wi-Fi network and Google Account to your TV. Select "Continue" to connect or "Skip" to proceed without it.
Wi-Fi Network Connection: Press ▲/▼ to select the Wi-Fi network, press OK and enter the password. You can also use Ethernet and skip network selection.
Country Selection: Press ▲/▼ to select the country of your device and press OK to confirm.
Password Setup: Set a password for your TV to ensure security and privacy.
Channel Scan: Select "Scan" to search for channels or "Skip Scan" to skip.
Setup Completion: Press OK to complete the setup. You can watch TV after agreeing to the disclaimer.
Home Screen Navigation:
Press the HOME button to go to the home page. From here you can access Google Assistant, Apps, Notifications, Inputs, Network & Internet, and Settings.
Input Source Selection: In the HOME interface, press ▲/▼ to select the "Inputs" icon, press OK to open the input source list, then press up to highlight an input and press OK to switch.
Navigating On-Screen Menus:
Access the settings menu either from Live TV (Menu button -> Settings) or from the HOME interface (select Settings icon). Use ▲/▼/◀/▶ buttons to navigate and OK to confirm.
Network & Internet Settings: Select "Network & Internet", then press ▲/▼ to choose options and OK to adjust. Press OK to save changes.
Channel Settings:
Access Channel settings via Menu -> Settings -> Channel -> Channels. Options include Channel Installation Mode, Auto Channel Update, Parental Controls, Audio Channel, and Open Source Licenses.
Accounts & Sign In: Sign in to your Google account to access features. Select "Sign in" or "Skip".
Apps Management: Set app permissions, view app lists, and manage apps.
Device Preferences: Access information and settings for your TV, including System Update, Device Name, Model, and Software Version.
Date & Time Settings: Configure automatic date & time, set date, set time, set time zone, and choose 24-hour format.
Timer Settings: Configure Power On Time Type, Power On Time, Power Off Time Type, and Power Off Time.
Language Settings: Press ▲/▼ to select the desired language and press OK to confirm.
Keyboard Settings: Manage current keyboard, Gboard settings, and manage keyboards.
Inputs Menu: Configure HDMI control, device auto power off, TV auto power on, and view HDMI EDID Version and CEC Device List.
Power Settings: Configure Sleep Timer, Picture off, Switch Off Timer, and No Signal Auto Power Off.
Picture Settings: Adjust Picture Mode (User, Standard, Vivid, Sport, Movie, Game, Energy Saving), Backlight, Brightness, Contrast, Saturation, HUE, Sharpness, Gamma, Color Temperature, Advanced Video, and Color Tuner. Reset all settings to factory defaults.
Sound Settings: Adjust Sound Style (User, Standard, Vivid, Sports, Movie, Music, News), Balance, Sound Surround, Equalizer Detail, Speakers (TV Speaker, External Audio System), Digital Output (Auto, Bypass, PCM, Dolby Digital Plus, Dolby Digital), SPDIF Delay, Auto Volume Control, and Downmix Mode (Stereo, Surround). Reset all settings to factory defaults.
Storage Settings: View Device storage and Removable storage.
Home Screen Customization: Set channels, apps, and open source licenses.
Retail Mode: Set Retail Mode to Off for regular TV viewing. When enabled, display settings are adjusted for a retail environment.
Google Assistant: Set searchable apps, safe search filter, block offensive words, and manage open source licenses.
Chromecast Built-in: View information and settings for Chromecast.
Screen Saver Settings: Configure Screen saver options (Turn screen off, Backdrop, Colors), When to Start, Put device to sleep, and Start now.
Location Settings: Configure Location status (Use Wi-Fi to estimate location, Off).
Usage & Diagnostics: Enable or disable automatic diagnostic information sharing.
Accessibility Settings: Configure Audio Description, Visually Impaired, Spoken Subtitle, Captions, and High contrast text.
Reset: Reset Erase everything. This will delete all user-defined settings and downloaded apps, restoring the TV to factory settings.
Remote & Accessories: Pair Bluetooth devices, including the Bluetooth remote control. Follow the on-screen instructions for pairing (Press MENU and LEFT buttons for 5 seconds).
Multimedia Player: In the HOME interface, select the MMP APP to display Video, Photo, Audio, Text. After inserting a USB flash drive, you can view the corresponding files.
EPG (Electronic Program Guide):
Under Live TV, press the GUIDE key to open the EPG interface. Program information is displayed. Operate the EPG menu using the Red/Yellow/Green/Blue keys. Press the PVR key to set up a recording schedule.
Record Function:
When a program is playing, press the PVR key to start recording. A USB memory device must be connected to a USB port for recording. Under Live TV, press the menu key, navigate to the Record menu, and select Record List to watch recorded programs.
Multimedia Formats Supported:
- Photo format: JPEG, JPG, PNG, BMP, GIF
- Movie format: AVI, MKV, MP4, MOV, VOB, DAT, FLV, MPG, WMV, TP, TRP, M2T, M2V, M4V, MPEG, 3GP, MJPEG
- Music format: MP3, AC3, AAC, WAV, OGG, FLAC, M4A, AMR
- Text format: TXT
For DTV PVR:
- USB stick: Format: FAT32, max 64G
- HDD: Format: FAT32, max 2T
For media playback:
- Format: FAT32/NTFS, max 2T
Troubleshooting
Symptom (Picture) | Symptom (Audio) | Inspection Check |
---|---|---|
Distorted picture | Normal Audio | Antenna position, direction or connection |
Interference | Noise | Electronic equipment, car/motorcycle, fluorescent light |
Normal Picture | Mute | Volume (check if mute is activated or if the audio system connections are not correct) |
No Picture | Mute | Power cord is not inserted, Power switch has not been turned on. Check Contrast and brightness/volume setup. Press Standby key on the remote control for inspection. |
No Colour | Normal Audio | Colour control |
Picture Breaking up | Normal Audio or Weak | Audio or Weak channel |
There is a Black Bar on the Top and Bottom | Normal Audio | Change aspect to zoom |
File playback issues:
- File not played from USB device: Check that the file is in a compatible format.
Internet access issues:
- Check whether the network cable/wifi is connected properly.