TRIBIT StormBox Mini

Getting Started

Before use, remove the sticker from the speaker [sticker removal].

Included accessories: A strap and a USB charging cable are provided. A charger is not included [charger not included].

EU Declaration of Conformity: Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS33 complies with Directive 2014/53/EU. The full text is available at: http://files.tribit.com/BTS33-eu-doc.pdf

UK Declaration of Conformity: Learn more about the UK Declaration of Conformity by downloading it from: http://files.tribit.com/BTS33-uk-doc.pdf

Charging The Speaker

Battery Status Indicators:

• When the battery is lower than 20%, the white light of the power button blinks.
• When charging, the red light of the charging indicator is always on.
• When fully charged (about 2.5 hours), the red light goes out.

Power On/Off

To turn on/off: Short press the power button.

Auto Power Off: The speaker will automatically turn off after 15 minutes if there is no audio input or operation.

Forced Shutdown: If the speaker is not working normally due to unknown reasons, long press the power button for 10 seconds to force shutdown, then restart the speaker.

Pairing

To enter pairing mode: Short press the Bluetooth button. The speaker can connect to up to one device at a time.

To disconnect Bluetooth: Press the Bluetooth button again.

Switching between Bluetooth and Audio Cable: If both Bluetooth and the audio cable are connected, you can switch between them by quickly pressing the Bluetooth button twice.

Controls

Button Functions:

• Power Button:
  • x1: Press once (Play/Pause ▶️/⏸️)
  • x2: Press twice (Next track ⏭️)
  • x3: Press three times (Last track ⏮️)
  • 2s: Press and hold for 2 seconds (Answer/End call ? or Reject call ❌?)
  • Voice Assistant: Press and hold for 2 seconds (Activate voice assistant ?️)
• Volume Buttons (+/-):
  • Press +/- to adjust volume up or down ?.
  • Reset: Press and hold the +- buttons simultaneously for 5 seconds to reset the speaker.
• Lights Button: Toggles the light effects ✨.

Stereo Mode (TWS)

To enable stereo mode with two speakers:

1. Turn both speakers on.
2. On Speaker A, long press the Bluetooth button for 5 seconds until a voice announcement is heard, then release.
3. Short press the Bluetooth button on Speaker B. Both speakers will announce a voice simultaneously, indicating successful stereo mode connection.

Note: Stereo mode (TWS) is not supported when using the AUX input.

Specifications

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Caution

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Power Requirements

The power delivered by the charger must be between a minimum of 0.75 Watts required by the radio equipment and a maximum of 6 Watts to achieve the maximum charging speed. ⚡

Safety Precautions

General Safety:

• Do not place the speaker in a place where it is easy to fall.
• Do not disassemble, repair, or modify this product by yourself.
• Keep the speaker away from extreme temperatures.
• Do not use the speaker in an outdoor thunderstorm environment.
• Do not use any corrosive cleaners or other chemical solutions to clean the speaker.

Warranty: 12-month warranty.