TRIBIT StormBox Blast 2
Wireless Party Speaker
Charging the Speaker
Battery Level Indicator:
- Below 10%: The last power indicator blinks.
- 10-20%: The last power indicator blinks.
- 21-50%: The power indicator breathes and flashes.
- 51-80%: The power indicator breathes and flashes.
- 81-100%: All indicator lights are on.
Charging Notes:
- When charging with Type-C, it will take about 12 hours for a full charge.
- When fully charged (approx. 5 hours), the indicator lights are all on.
Power On/Off
Short press the power button to turn the speaker on or off.
The speaker will automatically turn off after 30 minutes if there is no audio input or any operation.
Forced Shutdown: If the speaker cannot work normally due to unknown reasons, long press the power button for 8 seconds to achieve a forced shutdown, then restart the speaker.
Pairing
Short press the Bluetooth button once to enter pairing mode.
Long press the Bluetooth button for 2 seconds to disconnect the Bluetooth connection.
The speaker can be connected to up to two Bluetooth devices at the same time.
If both Bluetooth and the audio cable are connected, you can switch between them by pressing the Bluetooth button twice quickly.
Controls
Track Control:
- Play/Pause: Press the power button once (x1).
- Next track: Press the power button twice (x2).
- Last track: Press the power button three times (x3).
Volume and Bass:
- Volume up/down: Use the '+' and '-' buttons.
- XBass On/Off: Press the XBass button.
Reset: Press and hold the '+' and '-' buttons simultaneously for 5 seconds.
Ports and Features
- 1. AC input charging port: Connect the power adapter here.
- 2. Microphone volume control knob: Turn left to reduce volume, turn right to increase volume.
- 3. Microphone reverb knob: Turn left to reduce reverb, turn right to increase reverb.
- 4. USB-C input charging port: For charging the speaker.
- 5. USB-A output charging port: The speaker can charge other devices.
- 6. 3.5mm AUX audio input port: Connect external audio sources.
- 7. 6.35mm Microphone input port: Connect a microphone.
Stereo and Party Modes
Stereo Mode
1. First, connect Speaker A to your phone's Bluetooth, then press the TWS button on Speaker A.
2. Ensure Speaker B is not connected to any device, then press the TWS button on Speaker B (if Speaker B is already in Bluetooth pairing mode, no need to press the TWS button).
3. Both speakers play sound simultaneously, indicating that TWS is successful. Speaker A acts as the left channel and Speaker B as the right channel.
Party Mode
1. With two speakers already in stereo mode, press any speaker's TWS button.
2. You will hear a voice announcement indicating the switch to Party Mode.
3. In Party Mode, speakers A and B will no longer play the left and right channels separately; they play together.
To disconnect the TWS connection, long press any speaker's TWS button for 2 seconds.
TRIBIT App
Download the TRIBIT app to adjust EQ settings, upgrade the firmware, and explore more features.
Safety Precautions
- Tighten the silicone plug at the charging port to avoid water ingress and damage.
- When charging, please keep the charging port and charging cable completely dry.
- Do not throw or place the product in a place where it can be easily dropped to avoid damage to the product due to dropping.
- Do not disassemble, repair, or modify the product.
- The product has a built-in lithium battery; please do not dispose of it or put it in fire or an overheating environment to avoid danger.
- Consumers charging with a power adapter should purchase a power adapter that meets the requirements of local standards.
- The warranty period is 12 months.
Specifications
| Feature | Details |
|---|---|
| Bluetooth Version | V5.4 |
| Output Power | 200W (AC mode) 180W (Battery mode) |
| Bluetooth-Protokoll | A2DP, AVRCP |
| Frequency Response Range | 40~20KHz |
| Frequency Band Range | 2402-2480MHz |
| Maximum Transmission Power | ≤9dBm |
| Battery | 79.92Wh |
| Play Time | Up to 30 hours (At 50% volume with XBass and Lights Off) |
| Charging Time | About 5 hours (AC charging) About 12 hours (USB-C charging) |
| Waterproofing Grade | IP67 |
| Size | 476.2 x 259.2 x 193.3mm |
| Weight | 7150g |
Regulatory Information
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Power Delivery: The power delivered by the charger must be between a minimum of 1.5 Watts and a maximum of 8.5 Watts to achieve the maximum charging speed.
Declarations
Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS56 is in compliance with Directive 2014/53/EU. The full text of the EU declaration conformity is available at: //http:files.tribit.com/BTS56-eu-doc.pdf
Learn more about the UK Declaration of Conformity by visiting: //http:files.tribit.com/BTS56-uk-doc.pdf
