NetZero LED Component Kit Installation Instructions

⚠️ Warning

If the information in these instructions in conjunction with the installation manual for the fireplace are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

?️ Required Tools

• Drill with 1/4" nut driver

Installing into the Firebox

Steps

1. If the burner is currently installed, start by removing the burner from the firebox along with any media and glass that may be installed.
2. Remove the bracket that the junction box is secured to by removing the two screws holding it to the firebox.
3. Remove the junction box from the bracket by removing the cover plate and removing the two screws securing it to the bracket.
4. Reattach the junction box to the LED Component Kit bracket in the same location and orientation.
5. Install the LED Component Kit in the same location and orientation as the original bracket that was removed.

Visual Description

A diagram illustrates the process of installing the LED Component Kit into the firebox. It shows the placement of the kit components, including the LED strips and controller, within the firebox structure, indicating their orientation and connection points.

Wiring the LED Controller

Note: There are two LED Controllers available, allowing the optional LED Floor Kit and LED Glass Barrier to be controlled independently.

The power supply leads can be wired into the junction box along with the house power and unit power wires.

Connection Points

• To house power
• To LED Floor
• To LED Glass Barrier

Visual Description

An image displays the LED controller unit, which includes a power supply (labeled MW MODEL UHP-200-24). Wires are shown connected, with labels indicating their destinations: "To house power", "To LED Floor", and "To LED Glass Barrier". The controller has multiple terminals for connections.

Reconnecting Components

Follow the individual component installation instructions for connecting the LED component kits, such as the LED Floor Kit and the LED Glass Barrier. The remote is pre-paired to the controllers; the main task is to connect the LED kits to the LED controller leads.

Resyncing Controllers to Remote

Note: The following instructions are for resyncing controllers to the remote.

If installing both the LED Floor Kit and the LED Glass Barrier, you have two options for connecting them to the LED controllers: A) Connect both kits to one controller, resulting in both the LED floor and LED Glass barrier always displaying the same color. B) Connect each kit to its own controller, allowing them to be color-controlled independently.

Resyncing Steps

1. Turn off the rocker switches for both LED controllers. Status indicator lights, visible through the floor access, confirm power status; no light indicates the controller is off.
2. Restore power to the LED controller you wish to connect to a component by rolling its corresponding rocker switch ON. Within 3 seconds of restoring power, press the "I" of the zone 1 control. If pairing is successful, the status indicator lights will blink green 3 times slowly on the firebox floor access for the selected controller.
3. If the second controller is not being used, leave its rocker switch in the OFF position.
4. If you are using the second LED controller, restore power to it by rolling its corresponding rocker switch ON. Within 3 seconds of restoring power, press the "I" of the zone 2 control. If pairing is successful, the status indicator lights will blink green 3 times slowly on the firebox floor for the selected controller.

Visual Description

Diagrams show the status indicator and SYNC button access holes, as well as the rocker switches on the LED controllers. A separate diagram illustrates the Mi-Light remote control, detailing its features: a Link/Unlink button, Zone Selections (1-4), Master ON/OFF buttons, Brightness (+/-) controls, Speed (+/-) controls, and an Indicator light. The remote model FUT096 is visible.

Installation Complete

The LED Component Kit installation is now complete. Replace all components that were removed to gain access, in the reverse order of their removal. Refer to the next page for quick setup instructions for the LED remote and smartphone connection. To control the LED lights with your smartphone, Google Home, or Amazon Alexa, proceed to the LED controller instructions. Complete instructions for the remote and controller are also provided in the kit if more information is necessary.

Mi-Light RGBW Remote Controls

Product Features

This manual describes two types of RGBW remote controls used for RGBW products: the FUT095 (with buttons) and the FUT096 (touch screen). Both share identical functions but differ in design. Each remote control can manage LED lights across up to four different zones, allowing for color changes, dimming/brightening, adjustment of warm/cool white tones, and selection of various programs.

Technical Parameters

FUT095 RGBW Remote Control with Buttons

• Model No.: FUT095
• Voltage: 3V (AAA * 2PCS)
• Transmission Frequency: 2.4GHz
• Modulation Method: GFSK
• Transmitting Power: 6dBm
• Standby Power Consumption: 20uA
• Control Distance: 30m
• Size: 52.5*21*120mm

FUT096 Touch Screen RGBW Remote Control

• Model No.: FUT096
• Voltage: 3V (AAA * 2PCS)
• Transmission Frequency: 2.4GHz
• Modulation Method: GFSK
• Transmitting Power: 6dBm
• Standby Power Consumption: 20uA
• Control Distance: 30m
• Size: 52.5*21*120mm

Products Key Diagram

Remark: Hold the "I" button to activate white mode. In white mode, press 'S-' for warm white and 'S+' for cool white. In color mode, press 'S+/S-' for saturation control. When 'M' is pressed, 'S+/S-' adjusts the speed of dynamic modes. To dim all RGBW lights simultaneously or change their color, first press "Master ON". To control individual lights, first press "Zone ON", then select the color or brightness using the color ring or brightness ring.

Visual Description

A diagram details the functions of the Mi-Light remote controls. It shows the "Master ON" and "Master OFF" buttons, a "Color ring" for selecting colors, "Brightness -" and "Brightness +" controls, "Speed -" and "Speed +" controls for dynamic modes, and "Zone ON" / "Zone OFF" buttons for individual zone control. An "Indicator light" is also shown. The diagram also includes "Zone Selections" (1-4) and a "Link/Unlink button".

Linking & Unlinking Lights

Remark

The light can function after being linked with the remote controller.

Linking Instructions

1. Switch off the light, wait 10 seconds, then switch it on again.
2. When the light is ON, short press any zone of the "1" button 1 time within 3 seconds.
3. The light will blink 3 times slowly, indicating successful linking.

If the light does not blink slowly, the linking has failed. Please switch off the light again and follow the above steps.

Unlinking Instructions

1. Switch off the light, wait 10 seconds, then switch it on again.
2. When the light is ON, long press the "1" button within 3 seconds.
3. The light will blink 10 times quickly, indicating successful unlinking.

Unlinking must use the same zone as the linking process. If the light does not blink quickly, unlinking has failed. Please switch off the light again and follow the above steps to unlink.

Grouping of Several Lights

You can add an unlimited number of lights to a zone on the 4-channel remote by linking them to different zones. This provides flexibility in creating various group combinations. Diagrams show examples of these grouping configurations.

Remark

• The user can reprogram freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by a maximum of four remotes.
• Please check the battery installation and controller (fully discharge the power) when programming after switching off and switching on.

Attention

• This remote controller only operates specified Mi-Light products; not all Mi-Light series are compatible.
• If the indicator lamp blinks quickly during use, change the battery promptly. Avoid using poor quality batteries to prevent leakage that could damage the remote controller.
• When installing batteries, keep your finger off the touch ring to improve its sensitivity. Use the remote 3 seconds after batteries are installed. Reinstall batteries if the touch ring is found to be low-sensitivity.
• This 2.4GHz remote control system is a precise electronic product. Do not use it in humid, high-temperature, dusty, or high-voltage environments. Store it in a dry, static-free indoor environment.
• Do not use the remote controller near wide-range metal or strong electromagnetic wave areas, as this will badly affect the controlling distance.

Visual Description

Diagrams illustrate the linking and unlinking procedures for Mi-Light devices. These include steps involving switching power on/off, pressing specific buttons on the remote, and observing indicator light responses (slow green blink for linking, quick red blink for unlinking). Examples of grouping multiple lights into zones are also depicted. Icons for power, the Link/Unlink button, and remote controls are present. Safety certifications like CE and RoHS, and manufacturing origin "Made in China", are shown.

WiFi&BT 5-in-1 LED Strip Controller (Model No.: WB5)

Manual Instruction

Please read the instructions carefully before using the controller.

Features

• Adopted by the most advanced PWM control technology, with memory function (light status retained).
• Wireless and 4G controlled by Tuya Smart Life APP.
• 16 Million colors to choose.
• Color temperature: 2700K~6500K.
• Dim brightness/saturation.
• Support music rhythm.
• Support scene customization.
• Timing setting/countdown for turn on/off LED light.
• Bluetooth wireless control.
• Tap-to-Run & automation.
• Free screw for connecting to LED strip.
• WiFi wireless control.
• Smartphone APP control.
• Support third-party voice control (Amazon Alexa, Google Assistant).
• Support remote control (control distance 30m).
• Device sharing.
• Group control.
• 2.4G wireless transmission technology.
• Auto-transmitting & Synchronization.
• Link/Unlink/Reset Button on the controller.

Parameters

• Model No.: WB5
• Input Voltage: DC12V~24V (5.5*2.1mm)
• Output: 6A/Channel (Total Output Max. 15A)
• Working Temperature: -20~60°C
• Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
• RF: 2.4GHz
• Weight: 65g

Smart Link & Unlink to APP

There are 3 methods to Link and Unlink to the APP:

1. Long press "SET" for 3 seconds; the purple light will blink 3 times, and the device enters Smart Link/Unlink mode.
2. Use a linked remote; long press the linked Zone ON button for 3 seconds; the purple light will blink 3 times, and the device enters Smart Link and Unlink Mode.
3. Switch ON and OFF 3 times (ON-OFF-ON-OFF-ON) within 10 seconds; the purple light will blink 3 times, and the device enters Smart Link and Unlink Mode.

Note: A red pilot lamp that is always ON indicates the device is not linked to the APP and requires one of the above steps to link. A green pilot lamp that is always ON indicates the device is linked to the APP and is controllable.

Switching Output Mode

Short press the "SET" button to switch the output mode. The indicating lamp flickering confirms a successful switch. Different colors of flickering correspond to different output modes: White Light, Yellow Light, Single Color, Dual White, RGB, RGBW, and RGB+CCT (default mode).

Indicating Light Instruction

• Red light always-on: Disconnected from network.
• Green light always-on: Networking successfully.
• Red light blinking: Waiting for smart link.
• Blue light always-on: WiFi router disconnected but still controllable.

Auto-synchronization Function

Different controllers can work synchronously when they are started at different times, controlled by the same remote, and operate under the same dynamic mode and speed.

Remark

• The indicator light signifies Auto-transmitting.
• Controllers will automatically synchronize in the same dynamic modes and within a 30m controlling distance.

Auto-transmitting Diagram

One strip controller can transmit signals to another controller within 30m. As long as there is a strip controller within 30m, the remote control distance can be effectively limitless.

Connecting to LED Strip

The controller's input voltage must be in accordance with the required voltage of the LED Strips (Input voltage = Output Voltage).

Connect to CCT LED strip diagram

Connect to RGB LED strip diagram

Connect to Single Color LED strip diagram

Connect to RGBW LED strip diagram

Connect to RGB+CCT LED strip diagram

Visual Description

Diagrams illustrate the features and parameters of the WB5 WiFi&BT 5-in-1 LED Strip Controller. This includes input/output voltage ranges, channel output, working temperature, and communication modes. Various connection diagrams show how to connect different types of LED strips (CCT, RGB, Single Color, RGBW, RGB+CCT) to the controller. Icons representing WiFi, Bluetooth, App control, and compatibility with voice assistants like Amazon Alexa and Google Assistant are displayed. The diagram for "Free screw when connecting to LED strip" indicates a minimum depth requirement of 0.39 inches (10mm).

Remote Controller Compatibility

This controller is compatible with specific remote controls, which are purchased separately. Compatible models include FUT096, 091, and FUT007. For more details, refer to the respective remote control instructions.

Bluetooth Control Instructions

When the router is disconnected, you can use your smartphone's Bluetooth to directly control the device at a short distance.

Switching Bluetooth Control Steps

1. Complete the network distribution of the equipment.
2. Power off the router used for network configuration, turn off WiFi on your mobile phone, turn on Bluetooth, and wait for about 3-5 minutes to control.

Tuya Smart Life APP WiFi Control

1. Download and Install App

Search for "[Tuya Smart]" or "[Smart Life]" in your app store (Apple or Google) or scan the provided QR code (QR code excluded) to download and install the app. Please click the "Register" button to create an account for first-time use, or log in directly if you already have an account.

2. Connect to Smartphone

• Connect the controller with the power supply.
• Confirm the Pilot lamp is flashing quickly (2 flashes per second). If it is not flashing rapidly, there are two ways to enter this state: Long press the "SET" key until the Pilot lamp flashes quickly, OR power OFF and ON once, then long press the Zone ON button of a linked remote until the LED strip blinks 3 times (available remote model: LM091).
• Connect your phone to a 2.4GHz home WiFi network.
• Open the APP homepage and click the "+" button at the upper right corner of the page. If the pilot lamp is flashing red, the app will find the new device automatically.
• Added devices will be displayed on the homepage after successful network configuration.
• Click the desired device to enter its control interface.

3. APP Control

• On the homepage, click "device" or "group" to enter the control page, where you can manage color, saturation, brightness, color temperature, and scenes.
• Click "Music Sync" to enter music rhythm mode, where the light will change according to the rhythm of the music. Note: Music rhythm mode requires the phone to remain on this page.
• Click "More" on the bottom right to access additional settings, including Plan, Schedule, Biorhythm, and Power-on behavior. Detailed settings can be found at: Tuya Developer Documentation.

4. Device Name Editing, Third-Party Control, Device Sharing

• Click the " " icon (representing device settings) on the upper right corner of the control page to enter the edit page, where you can modify the device name, icon, etc.
• Click the icon under "Third-party Control" to view a detailed description of third-party integration.
• Click "Share Device" to share the device with family and friends.
• Click "Create Group" and follow the APP prompts after setup is completed to control devices by group.

5. Intelligent Control

• Click "Smart" at the bottom of the app.
• Click "+" in the upper right corner to create intelligent control (automations).
• In the "Create Smart" page, you can set commands to be executed under specified conditions (e.g., turn on/off light, change color, brightness, mode). Examples include: Launch Tap-to-Run (e.g., turn off all lights in the bedroom with one tap), When weather changes (e.g., when local temperature is greater than 28°C), Schedule (e.g., 7:00 AM every morning), or When device status changes (e.g., when an unusual activity is detected).

Visual Description

Screenshots from the Tuya Smart Life app are described, showing the process of adding devices, the main control interface for "Smart Wi-Fi Lighting" with options for color, brightness, and scenes, and the "Smart" section for creating automations. Icons for voice assistants like Alexa and Google Assistant are visible, indicating third-party integration capabilities. The interface includes options for scheduling, weather-based triggers, and device status monitoring.

Attention

• Please check if the input voltage of the constant voltage power supply is compatible with the controller, and verify the connection of both the cathode and anode.
• The working voltage is DC12~24V; the controller will be damaged if the voltage exceeds 24V.
• Non-professional users should not dismantle the controller directly, as it may cause fire and electric shock.
• The working temperature is -20~60°C; do not use the device in direct sunlight, moist, or other high-temperature areas.
• Please do not use the controller around metal areas or high magnetic fields, as this will badly affect the control distance.
• When the device load reaches 15A, the wire diameter must be over 1.5mm².

Visual Description

Safety and compliance logos such as CE and RoHS are displayed, along with the text "Made in China". A note indicates that the controller cannot be used in humid areas.