Nedis AirMusic Control App Setup Guide
Step 1: Download the App
Download the AirMusic Control App.
[App Store Icon] [Google Play Store Icon]
Step 2: Configure Network Settings
Note: Only devices with the 'Wireless Network (APP)' option support this function.
In the device menu, select: Configuration → Network → Wireless Network (APP)
Select 'Wireless Network (APP)':
Device Menu Options:
- 22:52 Wireless Network Configuration
- Wireless Network (APP)
- Wireless Network (WPS PBC)
- Manual Configuration
Device Screen:
- 22:52 Wireless Network (APP)
- Scan QR code or Visit: www.mediayou.net/airlink.php
- [Esc Button]
Step 3: Connect to Wi-Fi
Start the AirMusic Control app. Enter the Wi-Fi name and password for the network you want to connect to, then tap OK.
App Screen:
WiFi set up by App
Please make sure the WiFi set up by App support is marked in the radio manual.
Please enter "Wi-Fi name" (Letter case sensitive.)
Please enter "Password" (Letter case sensitive.)
[OK Button] ➡️
Step 4: Device Connection and Scanning
When the device displays your Wi-Fi name, the Wi-Fi is connecting.
Ensure the network status in the top-left corner is connected.
Device Screen:
22:52
? Connecting to Network...
Your Wi-Fi Name
App Screen:
22:52
Internet Radio
The app will scan for the radio device automatically (this may take 30-120 seconds).
➡️ ➡️
Troubleshooting
If the app cannot find the device:
- Restart the radio.
- Ensure the radio is not in Stand-by mode and is connected to the same Wi-Fi as the mobile device.
- Restart the app to try again.
App Screen:
WiFi set up by App
Connecting...
Scanning...
[Cancel Button]
