Portable CD Player

Contents

• Important Safety Instructions
• Packaging & Product
  • What's in the box
  • The CD player
• Troubleshooting
• User Guide
  • Insert a disc
  • Insert an earphone
  • Turn on the player
  • Turn off the player
  • Charge for the player
• Play
  • How to setup the circle mode
  • How to program the play
  • How to setup sound
• Other Features
  • Time setting of screen sleep
  • Key lock
  • Last memory
  • Connect to AUX devices
• Specifications

Important Safety Instructions

Please read this manual carefully before using this player and keep it for later reference.

Warning: The player

To reduce the risk of fire or avoid damage to the human body, please follow these instructions:

1. If the player fails to work, contact after-sales staff for detailed answers.
2. The player cannot be used or stored in a moist environment. Keep it away from any liquid, steam, or vapor, such as rain, mist, etc.
3. Do not place any liquid or metal gadgets onto the player, such as pins or a cup of coffee.
4. Do not expose the player to sunlight and keep it away from fire heaters. The player cannot be placed in a high-temperature environment.
5. All professionals with extensive electronic knowledge and maintenance experience are allowed to disassemble the player for maintenance. Replacement of spare parts must be done in strict accordance with circuit design parameters.
6. Do not stick or hit the player with sharp objects.
7. This player contains light-emitting diodes. Avoid staring directly into them to prevent visual impairment.
8. Children under 12 years are not allowed to use the player individually.

Battery

If the player contains batteries, do not disassemble or charge it with adapters that do not meet the electrical parameters of this product to avoid circuit failure. For safety, treat the built-in high-capacity polymer lithium battery by following these instructions:

1. Do not remove the battery pack.
2. Do not beat or impact this player.
3. Do not short circuit or pierce the battery.
4. Do not place the player under high temperatures above 140°F (60°C).
5. Do not put the battery in a fire.
6. If the battery has been damaged, ask a professional to replace it with the same specification, or contact after-sales support for help.

Hearing protection

Listen at medium volume:

Adjust the volume to an appropriate level. High volume may damage hearing or cause permanent damage.

Set the volume to a low level:

Increase the volume slowly until a comfortable, clear sound is heard.

Listen to the audio within a reasonable time frame:

Long-term listening, even at a reasonable volume, may cause hearing damage. Use the product properly and rest when necessary.

Environmental protection

To protect the environment and human health, follow local laws and regulations regarding the disposal of packaging, electronic products, or batteries. Do not dispose of the product with household waste.

Packaging & Product

What's in the box

• 1*CD player
• 1*USB charging cable
• 1*Earphones
• 1*3.5 to 3.5mm AUX cable
• 1*User manual

The CD player

The portable CD player features a circular design with a central disc compartment and an integrated control panel. The control panel includes buttons for playback control and a display screen. Along the sides of the player are various ports and switches.

Troubleshooting

User Guide

How to insert a disc

Push the OPEN button to the right to open the door. Insert your index finger into the center hole of the disc and take the edge of the disc with your thumb. Keep the side with words upward while inserting the disc into the CD player. Press the disc gently to make it steady, and ensure it is in place. Close the disc door gently and completely; otherwise, the player will not read the disc.

Note: The player is only compatible with CD, CDR, MP3, HDCD formats.

Insert an earphone

Only earphones with a 3.5mm plug are compatible with this player. For better sound quality, standard iPhone earphones can be used. Some cellphone earphones may produce noise. If an earphone is not supported, use the standard headphones provided with this player.

How to turn on the player

The power switch is located on the side. Toggle it to the ON position to play normally. When a disc finishes playing or there is no disc, the player will enter standby mode after 30 seconds. Press the PLAY button again to restart the player.

Note: The power switch has a key lock function designed to lock all key operations. A 'HOLD' word will be displayed on the screen when active. Do not toggle the power switch to the HOLD position before operation is completed.

How to turn off the player

There are two ways to turn off the player:

1. Toggle the power switch to the OFF position if the player will not be used for a long time.
2. The player will enter standby mode by pressing the STOP button twice in succession, but the power is not completely disconnected in this state.

Note: Always turn the power switch to the OFF position if the player will not be used for a long time.

How to charge the player

How to choose a charger:

This product is equipped with one charging cable. Any charger that supports USB2.0 protocol or a standard USB charger from an Android or iOS cellphone can be used to charge the player.

Charging time:

It takes approximately 4 hours to fully charge the player using the standard USB2.0 protocol. When charging, the LED indicator is red. Once fully charged, the LED indicator will turn blue.

Play

How to setup the circle mode

Each time the MODE button is pressed, the order of tracks played will cycle through: Repeat 1 (REP1), Repeat all (ALL), Random play (SHUF), and Preview play (INTRO) (only 10 seconds per track will be played in this mode).

How to program the play

When playback stops, press the PROG button to enter programming mode. Use the PREVIOUS or NEXT button to select the desired track, then press PROG again to confirm. Up to 30 tracks can be programmed. After programming, press the PLAY button to enter programming play mode. To cancel or reprogram, press the STOP button directly to enter stop mode.

How to setup sound

How to adjust volume

The volume knob is located on the side of the player. Rotate it left or right to decrease or increase the volume. Listen to music at an appropriate volume to protect your ears.

How to setup sound effect

Press the SOUND button to change the sound effects. There are 5 available sound effects: BBS, POP, JAZZ, ROCK, and CLASSIC.

Other Features

Time setting of screen sleep

The screen will turn off after 10 seconds of inactivity. The screen will turn on when any button is pressed.

Key lock

After playback mode and sound effects have been set up, toggle the power switch to the HOLD position to prevent accidental changes to the player's settings, for example, in crowded environments or by children.

Last memory

• ON: The player will return to the last stop-track on the disc.
• OFF: The player will not return to the last stop-track on the disc.

Press and hold the PROG button to turn the last memory function on or off. 'ON' or 'OFF' will be displayed on the screen. The last memory function is turned on by default.

Connect to AUX devices

To use this player in different occasions, an extra AUX cable is supplied to connect this player to any device with an AUX interface, such as: home theater systems, music centers, Bluetooth speakers, vehicles, headphone amplifiers, and more.

Specifications