Thank you for purchasing this personal audio product. This high-quality CD player is an electronic acoustic technology product carefully designed. To obtain the perfect use effect and prolong the service life of this product, correct usage is very important. Please read this manual carefully before use.
VERY IMPORTANT TIPS
When using this product, please follow the prescribed steps, otherwise you may be exposed to harmful radiation. This CD player is a CLASS 1 LASER product. When the CD cover is opened or carelessly closed, an invisible laser will be generated. Please do not touch the laser lens assembly at will, otherwise it will affect the playback performance.
Laser Safety Information: CLASS 1 LASER PRODUCT, APPAREIL À LASER DE CLASSE 1, PRODUCTO LASER DE CLASE 1. NEVER TOUCH THE LENS.
FUNCTION DESCRIPTIONS
POWER SUPPLY
A rechargeable polymer battery is built into the CD player. When the battery icon indicates low power on the LCD display, connect to the external Type-C USB 5V/2A for charging. The battery charging status is shown on the screen. The cable should be unplugged after a full charge. It takes about 3-4 hours to fully charge the battery.
HOW TO CONNECT HEADSET
You can use earphones to listen to the music played by the machine. Just plug the 3.5mm headphones into the earphone port, and the speaker will be automatically disconnected at this time.
SLEEP FUNCTION
- In the power on state, long press the [SLEEP] button to enter sleep mode. The LCD display screen shows "90" or "OFF" and "SLEEP".
- Short press [Previous]/[Next] button to select automatic shutdown time between OFF-10-20-30-40-50-60-70-80-90min. Press the [SLEEP] button again to confirm the setting.
- When SLEEP mode is in use, the LCD screen displays the remaining time, e.g., "016" for 16 minutes.
CD DISC/USB DISK MODE
After power on, press the Function Selector button ([FUN.]) to select CD or USB mode. The LCD will show the current mode, e.g., "CD 001".
Under CD Mode:
- Push the [OPEN] button on the right to open the CD compartment door, and place the disc printing surface upward on the spindle of the CD movement.
- Then close the CD compartment door completely, otherwise the player will fail to read the disc. The disc total tracks will show in the LCD screen.
- After a few seconds, the first track will automatically play while the LCD displays the format of the disc, e.g., "CD".
Under USB mode:
- Insert the USB flash disk with songs stored on it into the USB port on the unit to play music.
- After a few seconds, the first track will automatically play while the LCD displays the format of the file, e.g., "MP3".
Push the volume switch to adjust the volume appropriately.
Press the [Play/Pause] button ([▶️/⏸️]) once to temporarily stop playing, and press this button again to resume playing.
If you need to stop playing halfway, press the [STOP] button ([⏹️]) to stop playing.
During playback, short press the [Previous]/[Next] button ([⏮️]/[⏭️]) to jump to the previous/next song; long press the [Previous]/[Next] button ([⏮️]/[⏭️]) to fast rewind or fast forward.
Repeat function:
In the process of playing CD/USB:
- Short press the repeat button ([REP.]) once: The current song will enter into single cycle mode. The LCD will display as shown in figure a (e.g., "CD 022").
- Short press the repeat button ([REP.]) twice: If your USB flash drive contains a file directory, it will repeat to play the current folder. The LCD will display as shown in figure b (e.g., "USB FOLDER").
- Short press the repeat button for the third time: The whole disc will be played repeatedly. The LCD will display as shown in figure c (e.g., "CD ALL").
- Short press the repeat button for the fourth time: The whole disc will be played randomly. The LCD will display as shown in figure d (e.g., "CD RAND").
- Short press the repeat button for the fifth time: The whole disc will be played in intro mode, which will play the first 10s of each song. The LCD will display as shown in figure e (e.g., "CD INTRO").
- Press the repeat button for the sixth time to resume to normal playback.
Programming Function (When CD/USB is in STOP state):
- Press the [STOP] button ([⏹️]) to stop playing the CD discs/USB.
- Then short press the [PROG.] button on the machine to enter the programming interface.
- Press [Previous]/[Next] button ([⏮️]/[⏭️]) to select the song you want to program, then press [PROG.] button to confirm after programming.
- Press the [Play/Pause] button ([▶️/⏸️]) to play in the sequence of the programmed songs.
A-B Repeat:
- In the process of playing CD disc/USB, press the [A-B] button once to mark an A point, then press the [A-B] button again to mark a B point.
- The unit will repeat playing the audio between point A and point B.
- Press the [A-B] button again to cancel the A-B repeat function.
- Note: Point A and Point B must be within the same song.
BLUETOOTH MODE
- Short press the Function Selector button ([FUN.]) to switch to Bluetooth Mode. The LCD will show "BLUE".
- Turn on your mobile phone or other Bluetooth device. When it searches for the local Bluetooth device, the Bluetooth name "CD-35" will be displayed. After successful pairing, you will hear a prompt tone.
- The "BLUE" character on the LCD flashes slowly before connecting to the phone, and the "BLUE" is always on after successful pairing and connection.
- Press the [STOP] button to disconnect.
FM TRANSMISSION FUNCTION
- When playing CD or USB disk, press the FM transmission button ([FM]))). The LCD will display "FM+FM Frequency (87.5-108MHz)" flashing.
- Then press [Next+] or [Previous-] button ([⏮️]/[⏭️]) to set an FM frequency, and press the FM transmission button ([FM))) again to confirm the FM transmitting setting.
- Use an FM receiver (radio or car radio) and tune it to the same frequency you set on the machine. After successfully paired, the CD player sound will play via the FM receiver.
- During FM transmission working status, press the FM transmission button ([FM))) to cancel FM transmit function.
BLUETOOTH TRANSMISSION FUNCTION
- When playing CD or USB disk, press the Bluetooth transmit button ( ). The LCD will display "CD 001".
- When the Bluetooth is under pairing status, it will search Bluetooth devices around for pairing (those with receiving function like Bluetooth speaker/Bluetooth earphone/Bluetooth headphone).
- After pairing, the icon " " on the display screen stops flashing.
- Press Bluetooth transmit button ( ) again to stop Bluetooth transmission.
Note:
- Before connecting the wireless Bluetooth earphone with this player, you need to make sure to disconnect the other electronic Bluetooth device with earphone and set your wireless Bluetooth earphone to the searchable mode.
- If you cannot search and connect the Bluetooth device, please restart the Bluetooth or the player.
LINE OUT FUNCTION
When playing CD or USB disk, plug one end of the AUX cable into the LINE OUT port on the unit, and the other end into the speakers, car speakers or other devices for external playback.
SPECIFICATIONS
| Model | CD-35H |
|---|---|
| Supported disc formats | CD/MP3/CD-R/CD-RW |
| Supported USB formats | MP3/WAV/FLA |
| Bluetooth version | 5.1 |
| Bluetooth transmission and Reception range | Within 8-10 meters is optimum |
| FM transmission range | Within 3 meters is optimum |
| Lithium-ion battery | Lithium-ion polymer 3.7V/2000mAh |
| Power source | DC 5V/2A Type-C charging |
| Charging voltage | DC5V/2A |
| Charging time | 4.5 Hour |
| Endurance time | CD: 5 Hour, USB: 7Hour |
| CD playback sound | 31.5Hz-16kHz ±3dB |
| Speakers output power | 1.2W + 1.2W |
| Size | 146x146x33.5 mm / 5.75*5.75*1.32in |
| Weight | 322g/0.71lb |
SAFETY INSTRUCTIONS
Use Environment
- Do not expose the machine to rain or damp places, and place and use the machine away from bathtubs, washing boxes, swimming pools, etc.
- Do not put any source of danger on the device (for example, objects filled with liquid, lighted candles).
- Do not use the machine near heat sources, including radiator pipes, heaters or other appliances that generate heat.
- Put the machine on a flat surface to use.
- Be careful not to let solids or liquids enter the body from the product.
- The machine should not be exposed to water droplets or splashes, and objects filled with liquids such as vases should not be placed on the equipment.
Maintenance
Please place the machine in a well-ventilated place, not in the sun or other places that generate high temperature and humidity. During maintenance, please use a soft cloth moistened with a mild detergent to wipe the body. Do not use strong solvents such as alcohol, acetone, or thinner.
WARRANTY
This CD player has a full 12-month warranty against manufacturing defects. The warranty period begins from the date of purchase.
PACKING LIST
- CD Player x1
- Type-C Cable x1
- User Manual x1
- Earphones x1
- Storage Bag x1
- AUX Cable x1
RF exposure statement
This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux rayonnements de la FCC et de l'ISED établies pour un environnement non contrôlé. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
[FCC Logo] [CE Logo] [RoHS Symbol] [WEEE Symbol] Made in China
