Tribit StormBox Micro 2
Portable Wireless Speaker
Model: BTS12
EU Declaration of Conformity available at: http://files.tribit.com/bts12-uk-doc.pdf
What's in the Box
- Tribit StormBox Micro 2 Speaker
- USB-C Charging Cable
- User Manual
Product Illustration
Top View: The speaker features a compact, square design. The top surface has controls for 'Volume -', the 'Tribit' logo, and 'Volume +'. The Multifunction Button (MFB) is also located here.
Bottom View: The bottom of the speaker includes a USB-C charging port, a status indicator light, a microphone, a power button, and a Bluetooth pairing indicator.
Charging
Connect the speaker to a 5V power outlet using the provided USB-C charging cable.
To charge other devices, connect your USB-enabled device to the speaker using a USB-C charging cable.
Battery Indicator
The speaker has a battery indicator light:
- Red indicator flashing: Low battery
- White indicator flashing: Charging
- All indicators turn off: Full charged
Indicator Status Breakdown
| Battery Level | Indicator Status |
|---|---|
| 0-30% | One dot lit |
| 30-50% | Two dots lit |
| 50-70% | Three dots lit |
| 70-80% | Four dots lit |
| 80-100% | Five dots lit |
| Full Charged | All indicators off |
Button Operations
Power On/Off
Power Button:
- Short press: Turn the speaker on. The blue indicator will flash.
- Short press: Turn the speaker off. All indicators will turn off.
- Press and hold for 10 seconds: Factory reset.
- Press and hold for 8 seconds: Reset. The blue indicator will flash.
Bluetooth Connection
Bluetooth Pairing: Press and hold the power button for 1 second to enter pairing mode. The blue indicator will flash.
The speaker automatically connects to the last paired device. If unsuccessful, it enters pairing mode.
The speaker can remember up to 8 paired Bluetooth devices and connect to 2 devices simultaneously.
Conversion between 2 Connected Devices
- Pause playback on the current device.
- Play audio from the other device.
Volume Adjustment
Volume - Button:
- Short press: Decrease volume by one step.
- Press and hold: Continuously decrease volume.
Volume + Button:
- Short press: Increase volume by one step.
- Press and hold: Continuously increase volume.
Multifunction Button (MFB)
Music Mode
- Short press: Play/Pause music.
- Double press: Next track.
- Press 3 times: Previous track.
- Press and hold for 1 second: Activate Siri.
Conversation Mode
- Short press: Answer or end a phone call.
- Press and hold for 1 second: Reject an incoming call.
- Short press (during a call): Pause the current call and answer an incoming call.
- Short press (with two calls): Switch between calls.
Advanced Modes
Party Mode
To use Party Mode, you need two Tribit StormBox Micro 2 speakers.
Setup:
- Ensure both speakers are turned on.
- Long press the Bluetooth button on Speaker A for 5 seconds to enter pairing mode (Speaker A becomes the main speaker).
- Long press the Bluetooth button on Speaker B for 1 second to enter pairing mode (Speaker B becomes the secondary speaker).
- A "party mode" prompt will confirm successful pairing.
Stereo Mode
To use Stereo Mode, you need two Tribit StormBox Micro 2 speakers.
Setup:
- Ensure both speakers are in Party Mode.
- Briefly press the Bluetooth button on either speaker.
- Release the button when you hear the stereo mode prompt. One speaker will output "Left" and the other "Right" to indicate stereo mode activation.
Switching Modes
To switch between Party Mode and Stereo Mode, briefly press the Bluetooth button on either speaker.
Disabling Party/Stereo Mode
Press and hold the Bluetooth button on either speaker for 5 seconds to re-enter Bluetooth pairing mode.
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | 5.3 |
| Output Power | 10W |
| Frequency Response | 70Hz - 20KHz |
| Battery Type | 3.6V/4700mAh Lithium battery |
| Dimensions | 99.8 x 99.8 x 42.9 mm |
| Waterproof Grade | IP67 |
| Frequency Band | 2.402GHz~2.480GHz |
| Maximum Transmission Power | ≤ 6dBm |
Regulatory Information
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
