Empire Gaming Guardian C900 Laptop Cooler
Model: OE-CP-RGB10
Product Overview
The Empire Gaming Guardian C900 is a versatile laptop cooling pad designed to improve your device's performance and longevity. It offers efficient heat dissipation through multiple fans, customizable RGB lighting for an enhanced aesthetic, and adjustable height settings for ergonomic comfort. The integrated dual USB ports provide convenient connectivity for peripherals.
What's Included
- Portable cooler
- USB A to USB A cable
- User manual
- Declaration of conformity
- VIP pouch
Specifications
| Feature | Specification |
|---|---|
| Fans | 9 x 70 mm |
| Fan Speed | 2000 - 2700 RPM |
| Noise Level | < 25 dBA |
| Voltage | 5 Volts |
| Dimensions | 415 * 300 * 33 mm |
| Weight | 1180 g |
| USB Ports | 2 x USB 2.0 |
| Adjustable Height | 7 positions |
| RGB Backlighting | 10 Modes |
| Fan Backlighting | Yes (White) |
| Supported Laptop Size | 12" - 18" |
Key Features & Functions
- 1. Power Button: Manages fan modes and power.
- 2. RGB Button: Controls RGB lighting effects.
- 3. Fan Speed Control (+/-): Adjusts fan speed.
- 4. Non-Slip Pads: Securely holds the laptop in place.
- 5. Two USB 2.0 Ports: Provides power and peripheral connectivity.
Detailed Functionality:
Power Control
- Ventilation Modes: Hold the power button for 3 seconds to cycle through 3 modes.
- Fan On/Off: Briefly press the power button to turn all fans on or off.
RGB Lighting Control
- Mode Selection: Briefly press the RGB button to cycle through 10 lighting modes.
- Enable/Disable: Hold the RGB button for 3 seconds to turn backlighting on or off.
Fan Speed Adjustment
- Increase Speed: Briefly press the '+' button.
- Decrease Speed: Briefly press the '-' button.
- Note: Six adjustable speed modes are available: U1, U2, U3, U4, U5, and U6.
Non-Slip Pads
These pads prevent your laptop from sliding or falling off the cooling pad.
Dual USB 2.0 Ports
The primary USB port powers the cooler. The secondary port acts as a hub, allowing you to connect other USB-powered devices like keyboards or mice.
Installation Guide
To power your cooler, connect the included USB A to USB A cable to the cooler and then plug it into an available USB port on your computer. No additional software or drivers are required.
Support
For assistance or inquiries:
- Email: support@empiregaming.eu
- Website: www.empiregaming.eu
