GE Profile™ 36" Built-In Touch-Control Induction Cooktop
Model: PHP7036DT
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT:
Requires a 3" free area between the bottom of the cooktop and any combustible material, i.e., shelving. Free area not required when installing a wall oven underneath the cooktop. Refer to installation instructions. Requires a 15" minimum from the cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
NOTE: 36" induction cooktops are approved for use over select GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to the front edge of the countertop must be considered.
Before installing, consult installation instructions packed with product for current dimensional data.
APPROXIMATE COOKING DIMENSIONS
Diagram showing cutout dimensions and clearances for the cooktop.
Clearances:
- 13" MAX. depth of unprotected overhead cabinets.
- 30" MIN. clearance from countertop to unprotected overhead surface.
- 2" MIN. clearance from cutout to nearest vertical wall or cabinet on the right side of the unit below the 15" MIN. clearance height.
- 2" MIN. clearance to side wall from cut-out on the left of the unit.
- 15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop.
- 1-3/4" MIN. to rear wall.
- 2-1/2" MIN. from front edge of countertop to front edge of cooktop cutout.
- See label next to nameplate for MIN. clearance to rear wall.
Cutout Dimensions:
- 36" width.
- 18-7/8" to 19-1/4" depth.
- 33-7/8" to 34" width (opening).
- 19-1/8" to 19-1/4" depth (opening).
To insure accuracy, it is best to make a template when cutting the opening in the counter.
INSTALLATION ABOVE A WALL OVEN
Diagram showing installation clearances when the cooktop is installed above a wall oven.
- 2-1/2" MIN. from front edge of countertop to front edge of cooktop cutout.
- 31-1/4" MIN. from top surface of countertop to top surface of wall oven support platform.
ELECTRICAL INFORMATION
| KW RATING | AMPERAGE |
|---|---|
| 240V: 11.6 | 240V: 50 Amps¹ |
| 208V: 10.1 | 208V: 50 Amps |
NOTE: Check local codes for required breaker size.
CERTIFICATIONS AND GUARANTEES
- GE Appliances logo
- FIT GUARANTEE
- ADA COMPLIANT
- UL Listed by Underwriters Laboratories
FEATURES AND BENEFITS
- Maximum Responsiveness - 11 Control Levels
- Power Boil
- Precision Temperature Control
- Easy Clean Surface
- Safe Surface
- Most Efficient Heating
- Synchronized Elements
- Chef Connect
- Compatible Cooktop with Smart Timer
- Built-in WiFi
- Control Lock
- Fit Guarantee
Model PHP7036DTBB - Black on black
Product Image
Image shows the GE Profile 36" induction cooktop with five cooking zones and a touch control panel in the center.
COMPATIBLE COOKTOP WITH SMART COOKWARE
Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Accessories sold separately.
OPTIONAL SOUS VIDE PROBE
A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications. Visit geappliances.com for more info.
CUSTOMER SUPPORT
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center Service, 800.626.2000.
GE Appliances: Shop for Home, Kitchen, & Laundry Appliances
