GE Profile™ 36" Built-In Touch-Control Electric Cooktop

Model: PEP9036ST

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

IMPORTANT: Requires a 5" free area between the bottom of the cooktop and any combustible material, i.e., shelving. Free area not required when installing a wall oven underneath the cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.

NOTE: 36" Ribbon cooktops are approved for use over select GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to the front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.

APPROXIMATE COOKING DIMENSIONS

Cooktop Dimensions:

Width: 36"
Depth: 20-3/8"
Cutout Width: 33-7/8" to 34"
Cutout Depth: 19-1/8" to 19-1/4"
Clearance from front edge of countertop to front edge of cooktop cutout: 2-1/2" MIN.
Clearance to rear wall: 1-3/4" MIN.
Clearance at conduit location: 5-9/16"

Overhead Cabinetry and Wall Clearances:

Maximum depth of unprotected overhead cabinets: 13"
Minimum clearance from countertop to unprotected overhead surface: 30" MIN.
Minimum clearance from cutout to nearest vertical wall or cabinet on left side (below 15" min. clearance height): 2" MIN.
Minimum clearance from cutout to nearest vertical wall or cabinet on right side (below 15" min. clearance height): 1-1/2" MIN. (30") and 2" MIN. (36")
Minimum height from countertop to nearest cabinet (including light rails) on both sides of cooktop: 15" MIN.

To ensure accuracy, it is best to make a template when cutting the opening in the counter.

INSTALLATION ABOVE A WALL OVEN

Minimum clearance from top surface of countertop to top surface of wall oven support platform: 31-1/4" MIN.

ELECTRICAL SPECIFICATIONS

VOLTAGE (60HZ AC)	240V	208V
CONNECTED LOAD (MAX.)	10.9kW	8.2kW
CURRENT DRAW (MAX.)	45.4 Amps	39.4 Amps
RECOMMENDED CIRCUIT BREAKER	50 Amps	40 Amps

NOTE: Check local codes for required breaker size.

FEATURES AND BENEFITS

Power Boil on Two Tri-Ring Elements
Precision Temperature Control
Glide Touch Controls - 19 Control Levels
Easy Clean Surface
Smart Cookware Rebate for 11" Smart Pan
Built-in WiFi
Synchronized Elements
Chef Connect
Keep Warm Setting
Control Lock
Hot Surface Indicator Lights
Fit Guarantee
Model PEP9036STSS – Stainless steel

GUARANTEED FIT

Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications. Visit geappliances.com for more info.

SMART COOKWARE REBATE

Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Earn a rebate for a free 11" Hestan Cue Smart Pan.

CERTIFICATIONS

ADA Compliant
UL Listed

	GE Profile PEP7036DT 36" Built-In Electric Cooktop - Features & Installation Explore the GE Profile PEP7036DT 36-inch built-in electric cooktop. Discover its features like Glide Touch Controls, WiFi connectivity, and Power Boil elements, along with essential installation dimensions and electrical specifications.
	GE Profile 36" Built-In Electric Cooktop PEP9036DT - Specifications and Installation Detailed specifications and installation information for the GE Profile 36" Built-In Touch-Control Electric Cooktop, model PEP9036DT. Includes dimensions, electrical requirements, features, and benefits.
	GE Profile PEP7030DT 30" Built-In Electric Cooktop Specifications and Installation Detailed specifications, dimensions, and installation information for the GE Profile PEP7030DT 30-inch built-in touch-control electric cooktop, including features, benefits, and electrical requirements.
	GE Profile™ 36" Built-In Touch-Control Cooktop (PP9036DJ) - Specifications & Installation Detailed specifications, dimensions, installation requirements, and features for the GE Profile™ 36-inch built-in touch-control electric cooktop, model PP9036DJ.
	GE Profile PHP7036DT 36" Built-In Touch-Control Induction Cooktop Installation Guide Installation dimensions, features, and benefits for the GE Profile PHP7036DT 36" Built-In Touch-Control Induction Cooktop. Includes safety information and compatibility notes.
	GE Profile 36" Built-In Touch-Control Induction Cooktop PHP9036ST Installation and Features Detailed installation information, dimensions, and features for the GE Profile 36" Built-In Touch-Control Induction Cooktop (Model PHP9036STSS). Includes cooking dimensions, installation clearances, power ratings, and key benefits like Power Boil, Precision Temperature Control, and Smart Cookware Rebate.
	GE Profile 36" Built-In Touch-Control Induction Cooktop PHP7036DT Installation Guide Installation dimensions, features, and benefits of the GE Profile 36" Built-In Touch-Control Induction Cooktop (PHP7036DT). Includes safety information, clearance requirements, and compatibility details.
	GE Profile PEP7030DT 30" Built-In Electric Cooktop - Specifications and Installation Detailed specifications and installation information for the GE Profile PEP7030DT 30-inch built-in touch-control electric cooktop. Includes dimensions, clearances, electrical requirements, features, and benefits.