User Manual: Car Phone Holder
Instructions
Step 1: Assemble
Connect the main arm of the phone holder to the suction base.
Step 2: Adjust Length
Extend or retract the arm of the phone holder to achieve the desired length.
Step 3: Adjust Angle
Use the ball joint to tilt and rotate the phone clamp to the optimal viewing angle.
Step 4: Press the Button
Place your phone into the holder and press the side button to secure it. The holder is suitable for dashboard or windshield mounting and displays navigation on the phone screen.
⚠️ Stand for 30 Min Before Use
Notes
Please keep your dashboard clean and dry, with no dust.
Remove the protective film from the suction cup. Attach the suction cup mount firmly against the dashboard (or windshield), then press the bottom lock lever to fix it. Let it stand for more than 30 minutes before use.
Every time you want to change the installation position of the car mount, rinse the bottom of the suction cup with warm water and air dry it. To remove the suction cup mount, lift the bottom lock button first, then remove the suction cup mount gently.
Not suitable for the leather dashboard.
