CIRYCASE 360° Rotatable Bike Phone Mount
Part Identification
The phone mount consists of several key components:
- Upper Arm
- Security Lock
- Lock Knob
- Fixed Clamp
- Joint Ball
- Nut
- Groove
- Lower Arm
A visual guide shows these parts, with the Joint Ball fitting into the Groove of the Phone Holder via the Nut, and the Fixed Clamp designed to attach to a handlebar.
How to Use
Step 1: Attach the Joint Ball. Unscrew the nut. Insert the joint ball into the groove of the phone holder through the nut. Then, tighten the nut securely.
[Diagram: Shows the joint ball being inserted into the holder's groove and secured with the nut.]
Step 2: Adjust the Clamp. Loosen the screw on the fixed clamp to open it. Adjust the clamp to fit the diameter of your handlebar.
[Diagram: Illustrates loosening a screw to open the clamp and fitting it around a handlebar.]
Step 3: Secure the Clamp. Tighten the screw to ensure the clamp is firmly attached to the handlebar.
[Diagram: Shows the screw being tightened to secure the clamp.]
Step 4: Mount the Phone. Unlock the security lock located on the back of the phone holder. Place your phone onto the holder, pushing the upper arm to accommodate it.
[Diagram: Depicts unlocking the security lock and placing a phone into the holder's arms.]
Step 5: Lock the Phone. Once the phone is positioned correctly, pull the security lock on the back of the holder to the locked position to secure the device.
[Diagram: Shows the security lock being moved to the locked position to secure the phone.]
Important Notes
- Phone Thickness Limit: This bike phone holder is designed for phones with a maximum thickness of 17mm, including the phone case.
- Security Lock Engagement: Always ensure the security lock is engaged after placing your phone in the holder for maximum safety.
- Handlebar Mounting: For correct installation, non-horizontal handlebars require mounting on their horizontal sections.
[Diagram: A warning symbol ⚠️ is shown next to text indicating that non-horizontal handlebars must be mounted on the horizontal section for proper installation.]
