VIMAR SICURY 2P+T 16 A 250 V~ Socket Outlet with USB Type C Charger

Product Overview

The VIMAR SICURY 2P+T 16 A 250 V~ universal socket outlet, featuring an integrated USB Type C port, is designed for charging mobile phones and other electronic devices that support charging via a standard USB Type C connection. This product is available across VIMAR's Linea, Eikon, Arkè, and Plana series, offering a seamless integration into various electrical installations.

USB Socket Outlet Features

• Power Supply: 250 V~ 50/60 Hz
• Power Consumption: 185 mA at 250 V~
• USB Output Voltage: 5.0 V d.c. (± 5%) ES1 and/or SELV
• Max USB Output Load: 3.0 A
• USB Output Power: 15.0 W
• Average Efficiency (Active Mode): 82%
• Efficiency (Low Load 10%): 73%
• Power with No Load: 0.03 W
• Protection Degree: IP20
• Device Class: Class II
• Installation for Overvoltage Category: CAT II

Installation Rules

⚠️ Important: Installation must be carried out by qualified personnel in compliance with current electrical installation regulations in the country of use.

• Install the device in flush mounting boxes or surface mounting boxes, completed with compatible Linea, Eikon, Arkè, or Plana cover plates.
• Ensure installation in dust-free locations, protected from accidental impacts and away from heat sources.
• Before commencing any work on the system, disconnect the power supply using the main switch.
• For easier connection, power supply cables should exit from the terminal side.
• Note: The use of Arkè in the Fit version may require the use of spacer art. 19913.D.

Important Safety and Installation Notes

• An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream of the power supply.
• An SPD (surge protection device) must be installed upstream of the system to reduce the overvoltage category from III to II.
• Install the device at a height not exceeding 2 meters.
• The length of the connection cable to the electronic device must be no more than 3 meters.
• The Type C USB socket outlet is internally protected against overloads.

Diagram Description

The diagram illustrates the front view of the USB Type C port. It details the pin configuration: V+ (for 5V power), D- (data minus), D+ (data plus), and GND (ground). The output specification is clearly stated as 5V 3A. A note confirms that while the graphic represents the Linea series, the terminal positions, wiring, and overall functionality remain identical across the Eikon, Arkè, and Plana series.

Regulatory Compliance

This product complies with the following directives and standards:

• Directives: LV Directive, EMC Directive, RoHS Directive, ErP Directive.
• Standards: CEI 23-50, EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN IEC 63000.
• Regulations: (EU) Regulation for external power supply units no. 2019/1782, REACH (EU) Regulation no. 1907/2006 - Art.33 (product may contain traces of lead).

WEEE Information for Users

♻️ The crossed-out bin symbol on the equipment or its packaging indicates that the product must not be disposed of with general waste at the end of its working life. Users must take the product to appropriate separate collection centers for electrical and electronic waste. Alternatively, it can be returned to the retailer upon purchase of an equivalent new product. Retailers with a sales area of at least 400 m² also accept products smaller than 25 cm for free disposal without purchase obligation. Proper separate collection for recycling and environmentally compatible disposal helps prevent negative environmental and health effects and promotes material reuse and recycling.