Zeblaze Stratos 2 Ultra Smartwatch User Manual

1. Product Description and Button Definitions

The smartwatch features several buttons and a touchscreen for operation.

Button Definitions:

Button 1 (Power Button):

• Short Press: Turns the screen off in the watch face interface. In the app list, it returns to the watch face interface. Pressing again turns the screen off.
• Long Press (2 seconds): Power on/off, restart, SOS (after a long press, a menu will appear to select).
• Long Press (12 seconds): Force restart the device.

Button 2 (Return/Shortcut Button):

• Short Press:
  • A. Returns to the previous level from another page or a custom shortcut function.
  • B. When the screen is idle, a short press lights up the screen.
  • C. Pauses/resumes during sports activities.
  • D. During an incoming call, a short press mutes the sound.
• Long Press (2 seconds): Activates the voice assistant or a custom shortcut function.

Additional Information: The return/shortcut button is optional. Users can set and choose it themselves. If no shortcut is set, a short press returns to the previous level, and a long press activates the voice assistant. If a shortcut is set, it will perform the set action.

Button 3 (Sports Button):

• Short Press:
  • A. Navigate to the sports mode list.
  • B. When the screen is off, briefly press to light it up.
  • C. While in a sports activity, press for 2 seconds to pause and end the activity.

Note on Water Sports:

Water sports include swimming, diving, rafting, rowing, sailing, etc. In this mode, the watch has accidental touch prevention. During water sports, the system automatically disables the touch function. Users should prefer using buttons for operation or unlock the touch function for control.

Key Definitions in Water Sports Mode:

• Button ①: Short press to unlock the touch function. After unlocking, if the interface has been swiped down, use Button ① to swipe up.
• Button ②: Short press pauses the current sports mode. Pressing again resumes the sport and locks the touch screen function.
• Button ③: Short press scrolls down the page; a long press ends the sports mode. If the sport duration is too short, data may not be recorded. If a completion prompt appears, short press Button ③ to continue the sport. Pressing Button ② allows exiting the sport.

2. Touchscreen Control Definitions

• Swipe Down: On the watch face, swipe down to open the status bar.
• Swipe Up: On the watch face, swipe up to open the shortcut menu.
• Swipe Left: On the watch face, swipe left to access the main menu.
• Swipe Right: On the watch face, swipe right to access the notification interface.
• Switching Watch Faces: On the watch face selection screen, press and hold the crown for 2-3 seconds to switch watch faces. Swipe left and right to select a watch face, then click to confirm.

3. Charging

1. When the watch indicates a low battery, charge it promptly. Charging takes 2-3 hours.
2. The watch uses magnetic charging. Align the charging cable's charging port with the watch's charging port. Wait for the charging indicator on the watch screen.
3. The watch charges with the screen off for stability. Touch a button to wake the watch. If the battery is critically low, charge for 3-5 minutes before waking. This is normal. Wait 5 minutes and check the charge status.
4. Use a charger with a rated output voltage of 5V and a rated output current of 0.5A-2A, or a computer's USB port.
5. If the watch will not be used for an extended period, fully charge it, then power it off and store it. Avoid storing the watch with a low battery level to prevent battery damage.

4. Using GPS

1. For the best GPS experience, connect and pair the app first. Within about 3 minutes after pairing, the "GloryFitPro" app will send GPS ephemeris data and other information to the watch via Bluetooth. Successful transmission shortens GPS positioning time. If transmission fails, a "AGPS expired" reminder will appear when first using GPS-enabled sports, leading to longer positioning times. Try unpairing and re-pairing the watch app, wait 2 minutes, then use GPS. If APGS was successfully issued, the reminder will not appear on the first GPS use.
2. Every morning at 09:00, the "GloryFitPro" app downloads the latest GPS ephemeris data for the day. If Bluetooth is connected, the watch will download this data.
3. GPS positioning time can be affected by environmental factors. Choosing an open space away from tall buildings can improve GPS positioning and reduce track drift.
4. After finishing a sport, if you choose to save the data, the app will automatically synchronize it. You can check the sport track and data in the app for details.

5. GPS Interface Usage

The GPS interface shows different statuses: AGPS expired, No location, GPS localized, and Sports with localization.

6. Connecting to the App

Scan the QR code on the watch or visit your app store to download and install the "GloryFitPro" app. Upon first opening the app, you will be prompted for permissions. Click "Allow" to grant necessary permissions.

• Open GloryFitPro and set up personal information.
• Navigate to the "Device" page and tap the "Add device" icon.
• Tap the device model number in the list.
• Pairing successful.

During the connection process, a prompt like "Confirm pairing with the watch or mobile phone" may appear. Click "Confirm pairing".

After successful connection, the connection icon and data connection icon in the watch's status bar will turn green. A gray status indicates the watch is not connected.

Connection Status Examples:

• Bluetooth not connected, App not connected.
• App connected, Bluetooth not connected.
• App connected, Bluetooth connected.

7. Unpairing the App

• iOS: In the app's "Device" interface, find "Disconnect", tap it, then go to the phone's "Settings-Bluetooth" interface. Tap the "!" icon next to the device and select "Ignore this device". This ensures the device is no longer connected to the phone.
• Android: In the app's "Device" screen, find "Disconnect", tap it, then disconnect from the mobile phone.

8. Precautions

1. Do not charge the device in the presence of water.
2. This device is not a medical device. The data and information provided are for informational purposes only.
3. Do not wear it during hot showers or in saunas to prevent steam from entering the device. If water enters the watch and causes damage due to not following instructions, warranty service will not be provided.
4. Do not place the device in locations exposed to direct sunlight, such as a car dashboard or windowsill.
5. Do not place the device near heat sources or open flames, such as induction cookers, microwaves, ovens, water heaters, stoves, candles, or other places with high temperatures.
6. Prevent children or pets from swallowing the device or its accessories to avoid injury or malfunction.
7. This device is not a toy; children should use it under adult supervision.
8. The device has a built-in, non-replaceable battery. Do not attempt to replace it yourself.
9. If the watch comes into contact with water, dry the watch face immediately after removing it from the water source. If excessive water is in the speaker cavity and not removed promptly, it may affect sound quality. Locate the speaker's sound hole and shake out any residual water.

9. Simplified Declaration of Conformity

Manufacturer: ShenZhen Zeblaze Smart Company Limited

Address: Room 210, Yuan Xiong Building, Tongxing Road 26, Ban Tian Road, Longgang District, Shenzhen, Guangdong, China

Product: Smartwatch Zeblaze

Model: Stratos 2 Ultra

Radio Frequency: 2402 MHz ~ 2480 MHz

Max. Radio Frequency Power: < 20 dBm

The product complies with Directive 2014/53/EU of the European Parliament and of the Council of April 16, 2014, on the approximation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.

Declaration of Conformity is available at: https://files.innpro.pl/Zeblaze

10. Precautions

1. Before charging, ensure the device contacts are clean.
2. Never leave the device unattended during use or charging.
3. Ensure you can quickly disconnect the device from the power source in an emergency.
4. Never expose the device to high temperatures.
5. Charge the device in a dry, well-ventilated place, away from flammable materials, with at least 1m of clear space from other objects.
6. Never cover the device while charging.
7. Only use chargers, charging docks, cables, etc., recommended and certified by the manufacturer.
8. In case of fire, the device contains cells that are difficult to extinguish; be prepared with a fire blanket.

11. Environmental Protection

The WEEE symbol indicates that this electronic equipment complies with EU directives and should not be disposed of with regular household waste. It must be collected and recycled separately. Proper disposal prevents potential negative consequences for the environment and human health. Follow local environmental regulations for waste disposal. For detailed information, contact your local municipality, waste disposal facility, or the store where the product was purchased.

12. LI-ION Battery

The device is equipped with a non-replaceable LI-ION (lithium-ion) battery. Its physical and chemical properties cause it to age over time and with use. The manufacturer specifies maximum operating time under laboratory conditions with optimal usage. Actual battery life may vary from the advertised offer and is not a product defect but a characteristic. To maximize battery life, avoid discharging below 3.18V or 15% capacity. Lower voltages, such as 2.5V, can permanently damage the cell and are not covered by warranty. If the battery or device is unused for over a month, charge it to 50% and check the charge level every two months. Store the battery and device in a dry place, away from sunlight and extreme temperatures.

13. LIPO Battery

The device is equipped with a non-replaceable LI PO (lithium-polymer) battery. Its physical and chemical properties cause it to age over time and with use. The manufacturer specifies maximum operating time under laboratory conditions with optimal usage. Actual battery life may vary from the advertised offer and is not a product defect but a characteristic. To maximize battery life, avoid discharging below 3.5V or 5% capacity. Lower voltages, such as 3.2V, can permanently damage the cell and are not covered by warranty. If the battery or device is unused for over a month, charge it to 50% and check the charge level every two months. Store the battery and device in a dry place, away from sunlight and extreme temperatures.