Emilia Crystal Wall Light

Product Details

Recommended bulb: 1 x 28W G9 eco halogen capsule bulb. Bulb not included. Dimmable.

Specifications:

• Max. power: 33W
• Voltage: 220~240V, 50/60Hz
• Weight: 0.4kg

The product bears the CE mark, indicating conformity with European standards. It also features the WEEE symbol [recycling symbol], indicating that this product should not be treated as normal household waste and must be recycled. John Lewis supports the Distributor Take Back scheme, contributing to the development and upgrade of UK recycling facilities. Please take the product to your nearest collection facility or consult your local council or visit www.recycle-more.co.uk for details. The product is designed for indoor use only.

We have taken great care to ensure this product reaches you in perfect condition. Should any parts be damaged or missing, please email lightingparts@JLPspares.co.uk.

Trouble Shooting:

Issue: Why is the light not working when switched on?

• Check your power supply is switched on.
• Turn off the light and check that the bulb is inserted correctly.
• Check the bulb is still in working order.

Assembly Instructions

Before commencing assembly, ensure the house electricity supply is switched off at the fuse board [power off symbol].

1. Step 1: Ensure that the supplied wall bracket is securely fixed to a wall that can support the weight of the fitting.
2. Step 2: Connect cables or terminals as shown in the diagram.

   Wiring: Connect the supply wires to the fitting's terminals. Typically, the switched live supply (often brown wire) connects to the 'L' terminal, and the neutral supply (often blue wire) connects to the 'N' terminal. Ensure all wires are tight in the terminal block and no loose strands are left out. Cover connections with insulating tape (not included) if necessary.

3. Step 3: Attach the wall light fixture to the wall bracket. Then, attach the crystal chains to the main frame of the light. Fit the light bulb into the lamp holder. Do not exceed the maximum power indicated for the bulb.
4. Step 4: Attach the decorative aluminium rods to the main frame as shown in the diagram.

Once assembly is complete, switch on the electricity supply at the fuse board.

Care Instructions

We recommend cleaning with a soft, dry cloth. Do not use abrasive materials, as these will damage the finish.

This fitting is for indoor use only.

When replacing bulbs, use only bulbs from John Lewis or an established brand of the same type and compatibility.

CAUTION! The bulb and surrounding parts can become hot during use.

Parts List