Want your own website? | 123 Reg
One moment, please...One moment, please...
User Manual for Johan Lewis models including: Tobias nickel Wall light
Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference. Warnings! ... 4/8/2021 4:52:33 PM ...
Care instructions We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Indoors use only. Step 3 Replace bulbs from John Lewis or established brand of the same type and compatibility. Parts list Qty Qty A 2 D 1 B 2 E 1 C 1 F 1 Step 1 Step 2 no loose strands are left out.
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis do not operate instore.
File Info : application/pdf, 2 Pages, 257.62KB
DocumentDocumentRecommended bulb 1 x 4-8W ES energy efficient LED classic bulb or 1 x 28W ES eco halogen classic bulb Bulb not included Specifications Max. power: 40W Voltage: 220-240V~50/60Hz IP rating: 20 Weight: 0.47kg Please retain these instructions for future reference. This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk. fixi We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail lightingparts@JLPspares.co.uk Trouble Shooting: Why is the light not working when switched on? Check your power supply is switched on Turn off light and check that the bulb is inserted correctly Check the bulb is still in working order. John Lewis Partnership 171 Victoria Street London SW1E 5NN johnlewis.com Made in China User manual Tobias nickel Wall light Thank you for purchasing this Tobias nickel wall light. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference. Warnings! This product is Class I and must be earthed. This fitting should be fitted in accordance with IEE Regulations and the Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority. To prevent electric shock, switch off at the mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electricity supply without your knowledge. If you are in any doubt, please consult a qualified electrician. If replacing an existing fitting, make a note of the connections. Always use the correct type and power bulb. Never exceed the power stated. When changing a bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully. Caution! The bulb and surrounding parts can become hot during use Care instructions We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Indoors use only. Replace bulbs from John Lewis or established brand of the same type and compatibility. Parts list Qty Qty A 2D 1 B 2E 1 C 1F 1 Assembly Step 1 Step 2 Step 2 Step 1 Step 3 Step 4 Ensure the mains electricity supply switched off at the fuse board. Step 1 Ensure that the bracket (supplied) is fixed to a wooden joist, or use a suitable fixing to the wall which will support the weight of the fitting. Step 2 Connect cables or terminals as shown below. Check all wires are tight in the terminal block and no loose strands are left out. Cover with insulating tape (not included) Step 3 Attach wall light to fixing bracket as shown in the diagram. Step 4 Attach the correct type and wattage bulb to the lamp holder (bulb not included). The maximum power indicated must not be exceeded. Switch on the electricity supply at the fuse board.