Cloning Remote Control Manual

Important Notes & Precautions

Please pay special attention to the following:

• The original remote control may be used normally.
• Frequency: 433Mhz.
• Rolling code remotes may NOT work. Typically, a successful match will only work once. (Refer to linked video for details).
• Place the two remotes next to each other with ZERO distance between them.
• Pairings may need to be repeated several times until successful, especially in case of interference.
• Always clear the testing code before attempting to copy.

Clearing the Remote Control Code

Step 1: Press and hold the first and second buttons of the remote control simultaneously until the indicator light flashes quickly 3 times (?⚡️3️⃣).

Step 2: Release the second button, then click the second button 3 times consecutively (???). Ensure the first button remains pressed throughout this process.

Copying Method

Step 3: Press and hold the desired button on the duplicate remote control (e.g., button A). Then, press and hold the corresponding button on the original remote control until the indicator light on the duplicate remote blinks and lights up (?✨).

Important: Press the duplicate remote control button first, then press the original remote control button.

Recovery Mode

If you accidentally erase the code of the copy remote control, you can restore it.

Step 4: While pressing and holding the bottom two buttons of the remote control (e.g., buttons C and D), the recovery is successful when the indicator light flashes 3 times (?⚡️3️⃣).