Shuttle WWN04: 4G/5G Module and SIM Card Expansion Kit
Product Specification
Product Overview
The Shuttle XPC accessory WWN04 kit enables compatible Shuttle XPC products to be equipped with 4G or 5G mobile network functionality. It utilizes an M.2-2280 slot for the installation of a 4G/5G card. The WWN04 includes an adapter card and four antennas with antenna cables. A 4G module (M.2-3042 format) or a 5G module (M.2-3052 format) and a Nano-SIM card are required but not included in the scope of delivery.
Scope of Delivery
- Adapter card (daughterboard LN008)
- Mounting screw for 4G/5G card
- 4x Antennas
- 4x Antenna cables with washers and hex nuts
- Quick installation guide
Adapter Card
The included adapter card is installed in a compatible M.2-2280 slot of Shuttle products DS50U or X50V9 and provides the following slots:
- Combined M.2-3042/3052 Key B slot for 4G/5G cards
- SIM slot for a Nano-SIM card
Four Antennas
- 4G/5G Dipole omnidirectional antenna
- Color: Black
- Total length: approx. 17 cm
- Radiation pattern: Omnidirectional
- Connection: SMA male
Four Antenna Cables
- Cable length: 15, 17, 29, 36 cm
- Connections: SMA Pigtail female and I-PEX MHF 4
Compatibility
The WWN04 is compatible with the following Shuttle products:
- Shuttle XPC slim DS50U series, DN11H series, XH810, and XB860G2
- Shuttle XPC all-in-one X50V9 series and P55U series
Further Required Components
- SIM card in Nano format
- A 4G or 5G mobile network card in M.2 format:
| Type | M.2 Format | Interface | Antennas |
|---|---|---|---|
| 4G/LTE card | M.2-3042 Key B | USB 2.0 | 2 |
| 5G card | M.2-3052 Key B | PCIe or USB 3.0 | 4 |
Successfully Tested Mobile Network Cards
- Sierra EM7455 (4G, CAT 6, for Europe and North America)
- Sierra EM7430 (4G, CAT 6, for APAC)
- Huawei ME906S (4G, CAT 4, for EMEA, Australia, New Zealand)
- Quectel EM06-E (4G, CAT 6, for EMEA, Australia, Brazil)
- Quectel RM500Q-AE (5G, Sub-6 GHz, Global excluding China)
Installation Guide
- Locate the correct M.2 slot on the mainboard of the Shuttle DS50U series or the X50V9/P55U series. The marked area in the image on the right shows the M.2-2280 slot intended for the WWN04 installation.
- Install the adapter board (LN008) into the respective M.2 slot and secure it with a screw.
- Insert the Nano-SIM card into the SIM card slot, pushing the card in until it clicks into place. To remove, push the SIM card in slightly, then release. The SIM card will pop out slightly and can then be easily removed. Insert the Nano-SIM card with the gold contacts facing down and the cut-off corner pointing inwards.
- Install a 5G module (or 4G module) into the adapter board (LN008) and secure it with a screw. Then connect the four antenna cables to the connectors of the 5G module (or two antenna cables to the 4G module).
- The installation of the four antennas is described in the quick installation guide on the website of the respective Shuttle product.
