MOMAN Matrix 600S Wireless Video Transmitter System
Caring For Your MOMAN Product
- Keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage.
- Use only a soft and dry cloth for cleaning the product.
- Malfunction may be caused by dropping, impact, or external force.
- Do not attempt to disassemble the product. Doing so voids the warranty.
- Have the product checked or repaired by authorized technicians if any malfunctions occur.
- Failure to follow all instructions may result in mechanical damage.
- Warranty does not apply to human errors.
Package List
The package includes the following items:
- Transmitter: 1
- Receiver: 1
- User Manual: 1
- Type-C power cable: 1
Product Overview and Usage
This section describes the components and their connections for video transmission.
Components:
- TX: Transmitter unit, typically mounted on a camera.
- RX: Receiver unit, used for monitoring or further signal distribution.
- Monitor: A display device to view the transmitted video.
- Control Unit: A device for managing settings or operations.
The diagram illustrates a typical setup where the transmitter (TX) is connected to a camera, and the receiver (RX) is connected to a monitor and potentially a control unit. Dashed lines indicate the wireless transmission path.
Product Description and Ports
The Moman Matrix 600S system consists of a transmitter and a receiver with various ports and controls:
- 1. USB-C Port:
- Used for power and potentially firmware updates.
- 2. HDMI Input (TX) / Output (RX):
- Standard HDMI connection for video input on the transmitter and output on the receiver.
- 3. SDI Input (TX) / Output (RX):
- SDI connection for professional video signals, offering higher bandwidth and robustness.
- 4. OLED Display Screen:
- Displays status information such as channel, pairing status, and settings.
- 5. Direction Button:
- Used for navigating menus and adjusting settings.
- 6. Menu Button:
- Used to enter and confirm menu options.
- 7. Direction Button:
- Another directional control for menu navigation.
- 8. Power Switch:
- Turns the device on or off.
How to Pair the Moman Matrix Video Transmitter
Follow these steps to pair the transmitter and receiver:
- Power On Transmitter: Turn on the video transmitter. The display should show the current channel.
- Enter Settings: Long press the Menu Button for 3 seconds to access the "Setting" menu. Navigate to and select "Setting".
- Select Pairing: Press the Menu Button again to navigate to the "Pairing" option and select it.
- Enable Pairing: Press the Menu Button again. Use the Direction Button to switch the pairing mode to "ON". Press the Menu Button to confirm.
- Pair Receiver: Repeat the same pairing process on the receiver unit.
- Confirmation: Once pairing is successful, the display on both the transmitter and receiver should show "OK".
Contact and Support
For further information and support, Moman (UK) Limited can be contacted:
- Address: Unit 25 Basepoint Business Centre, Aviation Park, West Christchurch, United Kingdom BH23 6NX
- Websites: www.momanmic.com, www.momanx.com, www.momanx.co.uk
- Social Media: @MomanGlobal
- YouTube: https://moman.co/youtube
© Moman Global
