Snom M110 SC Bundle Quick Installation Guide
This guide provides essential information for setting up and using your Snom M110 SC Bundle, which includes a SIP DECT 8-line base station and a SIP DECT handset.
Delivery Content
The package typically contains:
- Snom M110 SC Base Station
- Snom M110 SC Handset
- Rechargeable Battery Pack
- Handset Charger with Power Adapter
- Ethernet Cable
- Quick Installation Guide
Setup and Usage
Inserting the Battery
Open the battery compartment on the handset and insert the rechargeable battery pack. Ensure correct orientation.
Charging the Battery
Place the handset on the charging cradle. The charging process typically takes approximately 11 hours for a full charge.
Connecting the Base Station
Connect the base station to your network using the Ethernet cable. If Power over Ethernet (PoE) is not available, an external power adapter (sold separately) may be required.
Wall Mounting
The base station can be mounted on a wall. Ensure the mounting tabs are inserted into the slots. Maximum wall mount screw size is 4 mm (0.157"). The base station should be mounted at a height not exceeding 2 meters.
Removing the Wall Bracket
To remove the wall bracket, locate the wall mount slot on the base station and carefully detach it.
Understanding Your Snom M110 SC
Base Station Features
- Handset Locator Button: Press briefly to ring the handsets. Press and hold for 4 seconds to register a handset.
- Power LED: Indicates network connection and handset registration/deregistration status.
- SIP LED: Indicates the status of the SIP account registration.
Handset Features
- Signal Strength: Displays the signal quality.
- Function Key Line: Context-sensitive keys that change function based on the current operation.
- Line Keys (L1-L4): Used for managing calls and lines.
- Loudspeaker: For hands-free communication.
- Battery Charging Status: Shows the current battery charge level.
- Call Handling: Keys for accepting calls, holding calls, ending calls, redialing, muting, and speakerphone.
- Navigation: Keys for menu navigation, scrolling, and selection.
Navigation and Controls
- On Idle Screen: Use DIR (Directory), CID (Call History), and MENU for navigation.
- In Menus & Lists: Use Scroll to navigate and OK/Select to confirm.
- Internal Calls: Make calls to other handsets within the system.
- Volume Control: Adjusts volume for handset and loudspeaker.
- Intercom: Communicate between handsets.
- External Loudspeaker: For audible alerts or calls.
- Belt Clip: For carrying the handset.
- Headset Connector: For connecting a compatible headset.
- Battery Compartment: Houses the rechargeable battery.
Safety Precautions
⚠️ CAUTIONS: Please read these precautions carefully before using the device.
- Use only the provided power adapter and batteries.
- Do not expose the device to extreme temperatures, humidity, or water.
- Keep small parts away from children.
- Medical Devices: Maintain a minimum distance of 20 cm (7.8 inches) between the wireless device and implanted medical devices (e.g., pacemakers). If you suspect interference, turn off the device immediately.
- Potentially Explosive Environments: Switch off the device in areas with potentially explosive atmospheres.
- Sensitive Electronic Equipment: Maintain a minimum distance of 10 cm (3.94") from sensitive electronic equipment.
- Battery Safety: Do not disassemble, puncture, or incinerate batteries. Dispose of batteries according to local regulations.
Technical Specifications
- Safety: IEC 62368-1
- Frequency Band: 1880-1900 MHz (EMEA)
- Channels: 10
- Operating Temperature: 0-40 °C
- Connectors:
- Headset: 2.5 mm jack
- Base Station Ethernet: 10/100 Mbps, RJ 45 (8P8C)
- Base Station Power: Coaxial connector
- Battery Type: Rechargeable NiMH 2.4 V, minimum 550 mAh
- Handset Charger Power: VTPL, model VT05EEU06045, 100-240V, 50/60Hz, 150mA, 6V, 450mA (EU)
- Base Station Power:
- Power over Ethernet (PoE): IEEE 802.3af, Class 2
- Optional Power Adapter (if PoE not available): Ten Pao, model S005BNV0500080, 100-240V, 50/60Hz, 150mA, 5V, 800mA (EU)
Standards Conformance & Disposal
This device complies with EU Directives 2014/53/EU and other relevant regulations. The Declaration of Conformity is available at www.snom.com/conformity.
Disposal: This product and its batteries are subject to European directives for waste electrical and electronic equipment and batteries. Do not dispose of with general household waste. Contact your local municipality or waste management provider for proper disposal instructions.