EDA ED-HMI3630-133C 13.3-inch Industrial HMI
Datasheet by EDA Technology Co., Ltd
Product Overview
The ED-HMI3630-133C is a 13.3-inch industrial Human-Machine Interface (HMI) powered by the Raspberry Pi CM5. It features a high-resolution 1920x1080 display with up to 450cd/m² luminance and a multi-point capacitive touch screen. At its core is the Broadcom BCM2712, a quad-core Arm Cortex-A76 (ARM v8) 64-bit SoC operating at 2.4GHz. The device supports up to 16GB of LPDDR4 RAM and 64GB of eMMC NAND storage, with expansion options via a Micro SD card slot and an M.2 B-key slot for SSDs. It offers extensive connectivity including HDMI, dual LAN ports, dual USB 2.0, four isolated RS232/485 ports, two isolated CAN ports, eight isolated Digital Inputs (DI), and eight isolated Digital Outputs (DO). The HMI supports a wide voltage power input range (DC 12V~24V) with built-in protection. Optional features include a supercapacitor for backup power, RTC, Watch Dog, EEPROM, and crypto authentication. It is designed for embedded installation and is compatible with VESA 75x75 mounting. CODESYS Control for Raspberry Pi MC SL is also available as an option.
Specifications
System
| Category | Details |
|---|---|
| CPU | Broadcom BCM2712, quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decode |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM |
| Storage | Options for 16GB, 32GB, 64GB eMMC storage 1 x Micro SD card Slot (user storage expansion) 1 x M.2 B port (for M.2 B 2230/2242 SSD storage expansion, options for 128GB, 256GB, 512GB) |
Software
| Category | Details |
|---|---|
| Operating System | Raspberry Pi OS (Desktop) 32-bit Raspberry Pi OS (Lite) 32-bit Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit |
Side I/O
| Category | Details |
|---|---|
| Power | 1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes. Supports 12V~24V input, signal defined as VIN+/GND. |
Side I/O Details
| Interface | Description |
|---|---|
| RS485/232 | 12-Pin 3.5mm pitch phoenix terminals with IO isolator (electrostatic and surge protection). Supports various configurations: ED-HMI3632-133C (2x RS485 + 2x RS232), ED-HMI3633-133C (3x RS485 + 1x RS232), ED-HMI3634-133C (4x RS485). RS485 signal: IGND/A/B; RS232 signal: IGND/TX/RX. |
| Audio | 1 x 3.5mm audio jack connector for Audio In/Stereo Out (MIC IN and LINE OUT). Audio output switches to headphone when connected, otherwise to the speaker. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port (RJ45 connector) for network access. |
| 100M Ethernet | 1 x adaptive 10/100M ethernet port (RJ45 connector) for network access. |
| CAN | 2 x CAN ports (6-Pin 3.5mm pitch phoenix terminals). Features 3 KV isolation protection, CAN 2.0B protocol, and baud rate from 10~1000 kbps. Signals: CANH, CANL, GND. |
| DI (Digital Input) | 8 x DI ports (10-Pin 3.5mm pitch phoenix terminals). Sensor Type: Wet Contact (NPN & PNP), Dry Contact. Features 5 KV isolation protection. Every 4 DI share a common pin (COMX0, COMX1). DI to COM logic: ON: 5~30 VDC or -30~-5 VDC; OFF: 0~2 VDC or -2~0 VDC. |
| DO (Digital Output) | 8 x DO ports (10-Pin 3.5mm pitch phoenix terminals). Sensor Type: NPN. Features 5 KV isolation protection. Output: 5~30 VDC (24 VDC recommended), max current 1.5A per channel. |
| SD Card Slot | 1 x Micro SD card slot for user data storage. |
| SIM Card Slot | 1 x Nano SIM card slot for 4G signal. |
| Micro USB | 1 x PROGRAMMING port for flashing eMMC. |
| HDMI | 1 x HDMI Type-A connector, compatible with HDMI 2.0, supports 4K 60Hz. |
| USB 2.0 | 2 x USB 2.0 Type-A connectors, supporting up to 480Mbps. |
| Antenna | 2 x SMA ports (optional) for connecting 4G antenna and Wi-Fi/BT antenna. |
| Speaker | 1 x PA output, built-in 4Ω 5W speaker. |
Buttons and Indicators
| Component | Description |
|---|---|
| Reset | 1 x Reset button to reset the device. |
| PWR | 1 x red power indicator for device power status. |
| 4G | 1 x green 4G indicator for 4G signal status. |
| ACT | 1 x green system indicator for device working status. |
| USER | 1 x green user indicator, customizable for application status. |
| COM1~COM4 | 4 x green UART indicators for communication status of UART ports. |
| CANB0~CANB1 | 2 x green CAN indicators for communication status of CAN ports. |
| X0~X7 | 8 x green DI indicators for input status of DI ports. |
| Y0~Y7 | 8 x green DO indicators for output status of DO ports. |
LCD Specifications
| Parameter | Value |
|---|---|
| Type | 13.3" TFT |
| Resolution | 1920 x 1080 |
| Color Number | 16.7M |
| Active Area | 293.76mm (H) x 165.24mm (V) |
| Backlight | LED |
| Luminance | 450cd/m² |
| Contrast Ratio | 1500:1 |
| Response Time | 25ms |
| Viewing Angle (CR≥10) | 80° (L) / 80° (R) / 80° (U) / 80° (D) |
Touch Screen
| Parameter | Value |
|---|---|
| Type | Capacitive Touch Screen |
| Multi-touch | Up to 5 points |
| Communication Method | USB |
| Transmittance | ≥85% |
| Surface Hardness | 6H |
Expansion Functions
| Function | Description |
|---|---|
| EEPROM | Supports 4K byte storage for improved ease of use. |
| Crypto Authentication | Enhances security by matching required upper layer applications. |
| RTC | Real-Time Clock with 1F SuperCAP backup, ensuring system clock integrity during power-off. Optional battery base with CR1220 battery backup available. |
| Buzzer | Configurable for alarms and notifications based on application requirements. |
| Watch Dog* | Function reserved on hardware; requires additional software support (under development). |
Electrical Characteristics
| Parameter | Value |
|---|---|
| Input Voltage | 12V ~ 24V DC |
| Power Consumption | 34W (Max) |
Mechanical Characteristics
| Parameter | Value |
|---|---|
| Dimensions | 340.2mm x 211.2mm x 66.5mm (WxDxH, antenna not included) |
| Weight | About 2.2Kg |
| Installation | Embedded front installation |
Wireless Connectivity
Wi-Fi/Bluetooth (Optional)
Features 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna. 2.4GHz Wi-Fi is compatible with IEEE 802.11 b/g/n, and 5GHz Wi-Fi with IEEE 802.11 a/n/ac. Bluetooth operates within the 2402MHz ~ 2480MHz frequency range.
4G (Optional)
Connects via Mini PCIe interface with antenna. Supports various 4G LTE modules:
EC20-CE Module (China/India)
- LTE FDD: B1/B3
- LTE TDD: B38/B39/B40/B41
- TDSCDMA: B34/B39
- WCDMA: B1
- CDMA 1x/EVDO: BC0
- GSM: 900/1800MH
- GPS/GLONASS/BDS/Galileo/QZSS (optional)
EC25-AFX Module (North America)
- LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71
- LTE-TDD
- WCDMA: B2/B4/B5
- GSM/EDGE
- GPS/GLONASS/BDS/Galileo/QZSS
EC25-AUX Module (Latin America/Australia/New Zealand)
- LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28
- LTE-TDD: B40
- WCDMA: B1/B2/B4/B5/B8
- GSM/EDGE: B2/B3/B5/B8
- GPS/GLONASS/BDS/Galileo/QZSS
EC25-EUX Module (Europe/Middle East/Africa/Thailand)
- LTE-FDD: B1/B3/B7/B8/B20/B28A
- LTE-TDD: B38/B40/B41
- WCDMA: B1/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
EC25-EFA Module (Europe/Middle East/Africa/South-East Asia)
- LTE-FDD: B1/B3/B7/B8/B20/B28
- LTE-TDD: B38/B40/B41
- WCDMA: B1/B5/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
Environmental & Regulatory
| Parameter | Value |
|---|---|
| Operating Temperature | -20°C ~ 50°C |
| Storage Temperature | -20°C ~ 60°C |
| Ambient humidity | 5% ~ 95% (non-condensing) |
System Diagram
The system diagram illustrates the architecture of the ED-HMI3630-133C. Key components include the Raspberry Pi CM5 at the core, connected to various peripherals and interfaces. Power input (12V-24V DC) feeds into a DC-DC converter. The CM5 interfaces with RAM (2GB/4GB/8GB/16GB) and eMMC storage (16GB/32GB/64GB). Connectivity options include 1000M Ethernet (RJ45), 100M Ethernet (RJ45), multiple USB 2.0 ports (Type-A), a Micro USB port for programming, and an HDMI Type-A connector. Communication interfaces include isolated RS485/RS232 ports via 3.5mm phoenix terminals, isolated CAN ports (CAN0, CAN1) via 3.5mm phoenix terminals, and 8 x DI and 8 x DO ports via 3.5mm phoenix terminals. Optional modules like Wi-Fi/BT (with SMA antenna) and 4G LTE (with SIM card slot and SMA antenna) connect via Mini PCIe. Audio is handled by a 3.5mm audio jack for MIC IN/LINE OUT and a speaker output. Other integrated features include RTC with SuperCAP backup, Watch Dog, EEPROM, Reset Button, and various indicator LEDs (PWR, 4G, ACT, USER, COM, CAN, DI, DO). The display is a 13.3" LCD with a capacitive touch screen.
Dimensions
Unit: mm
The device has overall dimensions of 340.2mm (Width) x 211.2mm (Height) x 66.5mm (Depth). The active display area is 293.76mm (Height) x 165.24mm (Width). Mounting is compatible with VESA 75x75.
Ordering Code
The ordering code structure allows customization of the industrial HMI. It includes base model (e.g., HM13630 Series), I/O configuration (e.g., 8x DI, 8x DO, 2x CAN), LCD Size (133 for 13.3-inch), Touch Screen Type (0=None, 1=Capacitive), Wi-Fi/BT (0=None, 1=With), CODESYS Control (Blank=None, SL=With), Super Capacitor (Blank=None, S=With), and 4G/LTE Module (Blank=None, 4CN=EC20-CE, 4US=EC25-AFX, etc.).
Example P/N: ED-HMI3632-133C-10216-4CN-S-SL
Configuration: 13.3-inch Industrial HMI based on Raspberry Pi CM5, with Wi-Fi & Bluetooth, 4G (EC20-CE Module), 2GB DDR, 16GB eMMC, 8x DI, 8x DO, 2x CAN, 2 x RS485, 2 x RS232, Super Capacitor Module and CODESYS Control Raspberry Pi MC SL.
Packing List
- 1 x ED-HMI3630-133C Unit
- 1 x Mounting Kit (including 4 x buckles, 4xM4*10 screws and 4xM4*16 screws)
- [Wi-Fi/BT Version - optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
- [4G Version - optional] 1 x 4G/LTE Antenna
