ED-IPC3630 Industrial Computer Datasheet

Product Overview

The ED-IPC3630 is an industrial computer based on the Raspberry Pi CM5, offering robust performance and extensive connectivity for demanding applications. It is designed for reliable operation in various environments.

Key Features:

Broadcom BCM2712, quad-core Arm Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz
Up to 16GB LPDDR4 RAM and 64GB eMMC storage, with support for Micro SD Card and M.2 NVMe SSD storage expansion
Dual LANs: 1 x Gigabit Ethernet and 1 x 100M Ethernet
4 x isolated RS232/RS485 ports with electrostatic and surge protection
2 x isolated CAN ports with LED indicators, supporting CAN 2.0B standard
8 x isolated Digital Inputs (DI) with LED indicators, supporting AC input
8 x isolated Digital Outputs (DO) with LED indicators, supporting overcurrent protection
Integrated 2.4GHz and 5GHz Wi-Fi, Bluetooth, and 4G LTE connectivity
Optional CODESYS Control for Raspberry Pi MC SL
Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection, and overcurrent protection
Integrated supercapacitor backup power (optional), Real-Time Clock (RTC), Watch Dog, EEPROM, and encryption chip
Wide operating temperature range of -25°C to 60°C
High-quality metal case, compatible with DIN-rail installation

Specifications

Category	Details
System
CPU	Broadcom BCM2712, quad-core Arm Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz
VPU	H.265 (HEVC), up to 4Kp60 decode
GPU	OpenGL ES 3.1 & Vulkan 1.2
Memory	Options for 2GB, 4GB, 8GB, 16GB LPDDR4-4267 SDRAM
Storage	Options for 16GB, 32GB, 64GB eMMC storage Micro SD card (user storage expansion) M.2 NVMe SSD (options for 128GB, 256GB, 512GB)
Software
Operating System	Raspberry Pi OS (Desktop) 32-bit Raspberry Pi OS (Lite) 32-bit Raspberry Pi OS (Desktop) 64-bit Raspberry Pi OS (Lite) 64-bit

Front I/O

Interface	Description
Power	1 x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes. Supports 9V~36V input, signal defined as VIN+/GND.
RS485/232	12-Pin 3.5mm pitch phoenix terminals with IO isolator (electrostatic and surge protection). Port configuration varies by model: ED-IPC3632: 2 x RS485 + 2 x RS232 ED-IPC3633: 3 x RS485 + 1 x RS232 ED-IPC3634: 4 x RS485 RS485 signal: IGND/A/B. RS232 signal: IGND/TX/RX.
1000M Ethernet	1 x adaptive 10/100/1000M Ethernet port, RJ45 connector.
100M Ethernet	1 x adaptive 10/100M Ethernet port, RJ45 connector.
CAN	2 x CAN ports, 6-Pin 3.5mm pitch phoenix terminals. Isolation Protection: 3 KV CAN Protocol: CAN 2.0B Baud Rate: 10~1000 kbps Signals: CANH, CANL, GND
DI (Digital Input)	8 x DI ports, 10-Pin 3.5mm pitch phoenix terminals. Sensor Type: Wet Contact (NPN & PNP), Dry Contact Isolation Protection: 5 KV Grouping: Every 4 DI share one common pin (COMX0 for X0, X2, X4, X6; COMX1 for X1, X3, X5, X7) DI to COM levels: ON: 5~30 VDC or -30~-5 VDC; OFF: 0~2 VDC or -2~0 VDC
DO (Digital Output)	8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals. Sensor Type: NPN Isolation Protection: 5 KV Output: 5~36 VDC (24 VDC recommended), max current 1.5A per channel

Rear I/O

Interface	Description
SD Card Slot	1 x Micro SD card slot for user data storage.
SIM Card Slot	1 x Nano SIM card slot for 4G signal.
Micro USB	1 x Micro USB port for flashing eMMC.

Side I/O

Interface	Description
HDMI	1 x HDMI Type-A connector, compatible with HDMI 2.0, supports 4K 60Hz.
USB 2.0	2 x USB 2.0 Type-A connectors, supporting up to 480Mbps transmission rate.
Antenna	2 x SMA ports (optional), for connecting 4G antenna and Wi-Fi/BT antenna.

Buttons and Indicators

Component	Description
Reset	1 x Reset button for device reset.
PWR	1 x red power indicator for device power status.
4G	1 x green 4G indicator for 4G signal status.
ACT	1 x green system indicator for device working status.
USER	1 x green user indicator, customizable for application status.
COM1~COM4	4 x green UART indicators for UART port communication status.
CANB0~CANB1	2 x green CAN indicators for CAN port communication status.
X0~X7	8 x green DI indicators for DI port input status.
Y0~Y7	4 x green DO indicators for DO port output status.

Internal I/O

Interface	Description
M.2 B	1 x M.2 B Key connector, supporting M.2 B 2230 and M.2 B 2242 SSDs.

Expansion Functions

Function	Description
EEPROM	Supports 4K byte storage for enhanced device usability.
Encryption chip	Enhances application layer requirements and device security.
RTC	Real-Time Clock with 1F SuperCAP backup to maintain system clock during power loss. Optional battery base available for CR1220 battery backup.
Buzzer	Configurable for alarms and notifications based on application needs.
Watch Dog*	Hardware reserved function, requires additional software support (under development).

Electrical Characteristics

Parameter	Value
Input Voltage	9V ~ 36V DC
Power Consumption	24W (Max)

Mechanical Characteristics

Parameter	Value
Dimensions	143mm x 100mm x 55mm (WxDxH, excluding DIN-rail and antennas)
Weight	1kg
Installation	DIN-rail mounting

Wireless Connectivity

Type	Details
Wi-Fi/Bluetooth (optional)	2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna. 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n. 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac. Bluetooth supports 2402MHz ~ 2480MHz frequency.
4G (optional)	Connects via Mini PCIe interface with antenna. Supports various 4G LTE modules and bands: EC20-CE Module (China/India): LTE FDD: B1/B3; LTE TDD: B38/B39/B40/B41; TDSCDMA: B34/B39; WCDMA: B1; CDMA 1x/EVDO: BC0; GSM: 900/1800MHz. Optional GPS/GLONASS/BDS/Galileo/QZSS. EC25-AFX Module (North America): LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71; LTE TDD; WCDMA: B2/B4/B5; GSM/EDGE; Optional GPS/GLONASS/BDS/Galileo/QZSS. EC25-AUX Module (Latin America/Australia/New Zealand): LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE TDD: B40; WCDMA: B1/B2/B4/B5/B8; GSM/EDGE: B2/B3/B5/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS. EC25-EUX Module (Europe/Middle East/Africa/Thailand): LTE FDD: B1/B3/B7/B8/B20/B28A; LTE TDD: B38/B40/B41; WCDMA: B1/B8; GSM/EDGE: B3/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS. EC25-EFA Module (Europe/Middle East/Africa/South-East Asia): LTE FDD: B1/B3/B7/B8/B20/B28; LTE TDD: B38/B40/B41; WCDMA: B1/B5/B8; GSM/EDGE: B3/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS.

Type

Details

Wi-Fi/Bluetooth (optional)

2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna.
2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n.
5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac.
Bluetooth supports 2402MHz ~ 2480MHz frequency.

4G (optional)

Connects via Mini PCIe interface with antenna. Supports various 4G LTE modules and bands:

EC20-CE Module (China/India): LTE FDD: B1/B3; LTE TDD: B38/B39/B40/B41; TDSCDMA: B34/B39; WCDMA: B1; CDMA 1x/EVDO: BC0; GSM: 900/1800MHz. Optional GPS/GLONASS/BDS/Galileo/QZSS.
EC25-AFX Module (North America): LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71; LTE TDD; WCDMA: B2/B4/B5; GSM/EDGE; Optional GPS/GLONASS/BDS/Galileo/QZSS.
EC25-AUX Module (Latin America/Australia/New Zealand): LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE TDD: B40; WCDMA: B1/B2/B4/B5/B8; GSM/EDGE: B2/B3/B5/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS.
EC25-EUX Module (Europe/Middle East/Africa/Thailand): LTE FDD: B1/B3/B7/B8/B20/B28A; LTE TDD: B38/B40/B41; WCDMA: B1/B8; GSM/EDGE: B3/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS.
EC25-EFA Module (Europe/Middle East/Africa/South-East Asia): LTE FDD: B1/B3/B7/B8/B20/B28; LTE TDD: B38/B40/B41; WCDMA: B1/B5/B8; GSM/EDGE: B3/B8; Optional GPS/GLONASS/BDS/Galileo/QZSS.

Environmental & Regulatory

Parameter	Value
Operating Temperature	-25°C ~ 60°C
Storage Temperature	-25°C ~ 60°C
Ambient humidity	5% ~ 95% (non-condensing)

System Diagram

The system diagram illustrates the architecture of the ED-IPC3630. Power input (9V-36V DC) is converted to 5V for the system. The core is the Raspberry Pi CM5, featuring a Broadcom BCM2712 processor, RAM (2/4/8/16GB), and eMMC storage (16/32/64GB). Connectivity includes:

Networking: 1000M Ethernet, 100M Ethernet, optional 4G LTE module (via Mini PCIe with SIM slot and SMA antenna connector).
Serial Communication: 2 x RS485/RS232 ports (via 6-pin connectors) with isolation, and 4 x UART indicators.
Industrial I/O: 2 x CAN ports (via 6-pin connectors) with isolation, 8 x Digital Inputs (DI) (via 10-pin connectors), and 8 x Digital Outputs (DO) (via 10-pin connectors).
Other Interfaces: Micro SD card slot, Micro USB port for flashing, 2 x USB 2.0 ports, HDMI port.
Internal Functions: M.2 B Key slot for SSD, RTC with SuperCAP backup, Watch Dog, EEPROM, and encryption chip.
Indicators: Power (PWR), 4G, ACT, USER, COM, CAN, DI, DO indicators are present.
Optional: Wi-Fi/Bluetooth module with SMA antenna connector.

Dimensions

The physical dimensions of the ED-IPC3630 are 143mm (Width) x 100mm (Depth) x 55mm (Height), excluding any attached DIN-rail or antennas. The unit is designed for DIN-rail mounting.

Ordering Code

The ordering code for the ED-IPC3630 series is constructed based on various configuration options. The general format includes:

Base Model: IPC3630 Series, specifying RS485/RS232 counts (e.g., IPC3632 for 2x RS485, 2x RS232; IPC3633 for 3x RS485, 1x RS232; IPC3634 for 4x RS485).
Wi-Fi/BT: '0' for without, '1' for with.
Memory: DDR RAM size (e.g., '02' for 2GB, '04' for 4GB, '08' for 8GB, '16' for 16GB).
eMMC Storage: Storage size (e.g., '16' for 16GB, '32' for 32GB, '64' for 64GB).
4G/LTE Module: Specifies the module and region (e.g., Blank for no 4G, '4CN' for EC20-CE China/India, '4US' for EC25-AFX North America, '4EU' for EC25-EUX Europe, etc., with optional GNSS indicated by 'G' or 'S').
Super Capacitor: 'S' for with Super Capacitor Module.
CODESYS Control: 'SL' for with CODESYS Control for Raspberry Pi MC SL.

Example: ED-IPC3632-10216-4CN-S-SL represents an ED-IPC3632 with Wi-Fi/BT, 2GB DDR, 16GB eMMC, EC20-CE 4G module (China/India), Super Capacitor, and CODESYS Control.

Optional Accessory

EDA Technology offers optional power adapters to suit different regional needs:

Model	Description
ED-PSU1202-UK-3.5PL	100~240VAC to 12VDC/2A Adapter, with UK AC plug, 3.5mm pitch phoenix plug with lock.
ED-PSU1202-US-3.5PL	100~240VAC to 12VDC/2A Adapter, with US AC plug, 3.5mm pitch phoenix plug with lock.
ED-PSU1202-AU-3.5PL	100~240VAC to 12VDC/2A Adapter, with AU AC plug, 3.5mm pitch phoenix plug with lock.
ED-PSU1202-EU-3.5PL	100~240VAC to 12VDC/2A Adapter, with EU AC plug, 3.5mm pitch phoenix plug with lock.

NOTE: Each adapter model includes only one type of plug (UK, US, AU, or EU).

Packing List

1 x ED-IPC3630 Unit
[Wi-Fi/BT Version - optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
[4G Version - optional] 1 x 4G/LTE Antenna

	ED-IPC2600 Industrial Computer User Manual Comprehensive user manual for the ED-IPC2600 series industrial computer, detailing hardware overview, interfaces, installation, configuration, and OS setup. Features Raspberry Pi CM4 for industrial control and IoT applications.
	ED-IPC2100 User Manual: Industrial Computer with Raspberry Pi CM4 Comprehensive user manual for the ED-IPC2100 series industrial computer by EDA Technology. Details hardware overview, packing list, appearance, interfaces, installation, configuration, and OS setup for this Raspberry Pi CM4-based device.
	ED-IPC2100 系列用户手册 ED-IPC2100系列是一款基于Raspberry Pi CM4的高可靠性工业计算机，提供多种配置选项和丰富的接口，适用于工业控制和物联网领域。本手册详细介绍了产品的硬件、安装、配置和操作系统安装等内容。
	ED-SBC2300 User Manual by EDA Technology Comprehensive user manual for the EDA Technology ED-SBC2300 series industrial single board computer, detailing hardware specifications, interfaces, installation, and system configuration.
	EDA ED-HMI3630-133C 13.3-inch Industrial HMI Datasheet Datasheet for the EDA ED-HMI3630-133C, a 13.3-inch industrial HMI powered by Raspberry Pi CM5, featuring high resolution, touch screen, extensive I/O, and optional connectivity.
	ED-IPC2600 用户手册 - EDA Technology 用户手册详细介绍了EDA Technology ED-IPC2600工业计算机的硬件概述、安装指南、系统配置和操作方法，包括接口定义、按键功能、指示灯说明以及操作系统安装等。
	ED-PLC2010 CODESYS PLC User Manual and Technical Specification Comprehensive guide to the EDA Technology ED-PLC2010 CODESYS PLC, covering hardware features, software configuration, I/O integration, and programming with CODESYS. Includes detailed specifications and operational instructions.
	ED-IPC2400 Industrial Computer User Manual Comprehensive user manual for the EDA Technology ED-IPC2400 series industrial computer, detailing hardware overview, installation, configuration, and OS setup. Features Raspberry Pi CM4, multiple serial ports (RS232, RS485), Ethernet, and HDMI for industrial control and IoT applications.