Winix C909 Air Purifier

Model Part Diagram

The air purifier consists of several key components:

Front View:

• Control Panel: Located at the top front for user interaction.
• Front Panel: The main exterior casing.

Back View:

• Handle: For carrying the unit.
• Air Outlet Vent: Where purified air is expelled.
• Power Plug: Connects the unit to an electrical outlet.

Package Contents

• 1 x Pre-Filter
• 1 x Unit
• 8 x Activated Carbon Filters
• 2 x True HEPA Filters
• 1 x User Manual
• 1 x Alexa Setup Guide / Wi-Fi Setup Guide

Where to Use

Proper placement ensures optimal performance and longevity:

• Maintain 12-18 inches of space between the unit and other electronics (TVs, radios) to prevent electromagnetic interference.
• Place indoors, away from direct sunlight, which can cause malfunction or failure.
• Ensure the unit is placed only on hard, flat surfaces to avoid abnormal noise and vibrations.
• Allow at least 12-18 inches of clearance from walls for maximum airflow.

4-Stage Air Purification

The air purification process involves four stages to remove airborne particles:

1. Pre-Filter: Captures larger particles like dust and pet hair.
2. Activated Carbon Filter: Absorbs odors, VOCs, and smoke.
3. True HEPA Filter: Captures 99.97% of airborne allergens, dust mites, pollen, mold spores, and pet dander (particles as small as 0.3 microns).
4. PlasmaWave® Technology: Creates hydroxyls to help reduce airborne viruses, bacteria, and gases (optional feature).

Control Panel

The control panel allows for full management of the air purifier's functions:

Winix Smart Wi-Fi Setup

Connect your air purifier to Wi-Fi for smart control:

Requirements: 2.4Ghz wireless router, Android 5.0+ or iOS 10.0+ smartphone.

Note: Disable VPN networks before connecting.

1. Download the Winix Smart app from Google Play or the App Store.
2. Run the app and follow the setup guide to connect your device.
3. Select "New Unit" and choose model C909.
4. Read the notice and select "OK".
5. Enter your Wi-Fi network password.
6. Press and hold the Wi-Fi button on the unit until it beeps; the Wi-Fi indicator will blink.
7. Connect to the Winix Smart network via your device's network menu.
8. Select "Next" to connect your unit to your device.
9. Define unit settings (Name and Location).
10. The Winix Smart Indicator will light up upon successful setup.

Initial Operation

Follow these steps to set up and start your air purifier:

1. Remove the front panel by gently pulling it forward from the upper edge.
2. Remove the Pre-Filter, then the bag containing the other filters.
3. Remove the packing vinyl from the filters. Insert the Activated Carbon Filter into the Pre-Filter.
4. Install the filters securely into the unit. The True HEPA Filter typically goes in the back, and the Pre-Filter (with Carbon Filter) in the front.
5. Close the front panel.
6. Insert the power cord into an electrical outlet.

Maintenance

When to Replace Filters

Note: Intervals may vary based on environment. The "Check Filter" indicator LED flickering signifies it's time to replace the filter.

Replacing Filters & Resetting Filter Life

After replacing your True HEPA Filter:

1. Reinstall the Pre-Filter and close the front panel.
2. With the unit on, press and hold the Filter Reset Button for at least 5 seconds until you hear a beep.
3. The Filter Replacement Indicator will turn off, indicating the filter life has been reset.

Cleaning Care

Cleaning the Filters:

• Pre-Filter: Use a vacuum cleaner or soft brush. If excessively soiled, rinse in room temperature water. Do not use detergent or soap. Allow to dry for 24 hours or more before reuse. Cleaning intervals may vary. Do not use hot water over 104°F or volatile fluids.
• Activated Carbon Filter: Cannot be washed. Replace every 3 months.
• True HEPA Filter: Do not wash and reuse. Replace when indicated.

Cleaning the Exterior & Interior:

• Wipe the exterior with a soft damp cloth using room temperature water, then dry with a clean cloth.
• Open the front panel and clean the interior with a vacuum cleaner.
• For optimal performance, clean every 1-2 months.

Notice:

• Always unplug the power cord before cleaning and wait for the unit to cool down.
• Never disassemble, repair, or modify the unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Ensure the unit is unplugged before cleaning or maintenance.
• Avoid using benzene, alcohol, or other volatile fluids, as they can cause damage or discoloration.

Specifications

The exterior, design, and product specifications are subject to change without prior notice to improve product performance.

Safety and Cautions

Read and follow all safety cautions before operating the equipment.

General Safety:

• Ensure filters are inserted before running the unit to prevent electric shock ⚡ or injury.
• Do not insert foreign objects into the unit's vents.
• Do not touch the interior with wet hands; high voltage can cause electric shock ⚡.
• Ensure intake and outlet vents are not blocked to prevent overheating and product failure.
• Do not use the unit as a step stool or place heavy objects on it.
• Do not pull the power cord when unplugging; grasp the plug itself.
• Do not tie or knot the power cord during operation.
• If the unit becomes submerged in water, unplug it immediately and contact customer service.
• Do not unplug or move the unit while it is in operation.
• Do not plug additional appliances into the same outlet.
• Do not touch the plug with wet hands.

Warnings & Important Cautions:

• If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised or instructed by a responsible person.
• Children should be supervised to ensure they do not play with the appliance.
• This unit is not intended for preserving documents or art conservation.
• Unplug the unit when not in operation for extended periods.
• Do not place near heating elements, mist/fumes from industrial oil, or large quantities of metallic dust.
• Avoid damaging the power cord by bending, pulling, twisting, bundling, pinching, or placing heavy objects on it.
• Do not install in vehicles (trucks, boats, ships).
• Do not place in areas with excessive noxious gases or flammable materials (aerosols, fuel).
• Do not face the unit into wind or drafts.
• Do not place below any electrical outlet.
• Avoid excessively humid areas where the unit may become wet ?.
• Do not place the unit closer than 12 inches from walls during operation to prevent condensation.
• Do not repair or modify the unit yourself; all repairs should be done by a qualified technician.
• Use AC 120V only.
• Periodically remove dust from the power plug to reduce shock risk.
• Do not operate with indoor smoke-generating insecticides or spray insecticides on the unit.
• Do not use benzene, alcohol, or paint thinner for cleaning.
• Do not insert fingers or foreign objects into air intake or outlet vents.
• Do not use near flammable gases or spark-creating items (cigarettes, incense).
• The unit will not remove carbon monoxide.
• Do not block intake or outlet vents.
• Do not use near hot objects like stoves or where it may contact steam.
• Do not use the unit on its side.
• Keep away from products that generate oily residue (e.g., deep fryer).
• Do not stick small objects into air outlet vents or the fan.
• Do not use detergent to clean the unit.
• Do not operate without a filter.
• Do not wash and reuse the True HEPA Filter.
• Use the handle on the back for transport; do not hold by the front panel.

2 Year Limited Warranty

Warranty Terms:

1. This product is manufactured under stringent quality control and inspections.
2. The limited warranty is voided if product failure results from consumer negligence or misuse.
3. Proof of purchase is required for warranty claims.
4. Register your product on winixamerica.com to upload proof of purchase.
5. This limited warranty is valid only in the USA and Canada.

For more information, visit winixamerica.com/terms-and-conditions/.

Please complete the following information after purchase:

Compliance and Certifications

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try measures like reorienting the antenna, increasing separation, or connecting to a different circuit.

Innovation, Science and Economic Development Canada (ISED) Compliance: This device contains license-exempt transmitter(s)/receiver(s) that comply with ISED's license-exempt RSS(s). Operation is subject to two conditions: the device may not cause interference, and it must accept any interference, including that which may cause undesired operation.

En français: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : L'appareil ne doit pas produire de brouillage; L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Certifications:

• ENERGY STAR Certified: Energy efficiency measured by CADR/Watt ratio.
• CARB Certified: Meets California ozone emissions limit.
• CUL US LISTED: Certified for safety standards.

This product is manufactured for use only in USA / CA and is suitable for 120 V only.