Nokia 8390 Power Button Replacement
This guide shows users how to disassemble the power button.
Written By: Keith
Guide ID: 11522 - Draft: 2017-10-10
Provided by: iFixit
Introduction
This guide shows you how to access the power button in case of needed replacement.
Tools:
- Spudger (1)
Step 1: Back Cover
Locate the button on the bottom of the back cover.
Image shows a hand holding the Nokia 8390 phone. The back cover is attached, and the power button is visible on the bottom edge of the back cover.Step 2: Remove Back Cover
- Depress the button with your finger.
- While the button is depressed, slide the back cover off of the phone.
Step 3: Outer Case
- Grasp the top and bottom of the front cover.
- Grasp the phone body with your other hand.
- Lightly pull the casing off of the phone.
Step 4: Power Button
- The casing should be separated into two parts now.
- Locate the power button at the very top of the front casing.
Step 5: Final Removal and Reassembly
- Use the spudger to push the power button through the casing.
To reassemble your device, follow these instructions in reverse order.