Jensen JWM40 Mobile Audio System
Installation and Owner's Manual
Introduction
Thank you for choosing a Jensen product. This owner's manual provides clear and easy-to-follow instructions for your new Jensen receiver, designed to help you maximize your enjoyment.
Features
- Digital AM/FM Tuner with 30 Preset Stations (12 AM/18 FM)
- Bluetooth Ready with A2DP/AVRCP Streaming Audio
- Electronic Bass, Treble, Balance, and Fader Controls
- Skip Protected Disc Mechanism
- DVD/CD-R/RW and MP3 Compatible
- Time/Alarm Clock
- LCD Backlight Control
- 1/8" Front Auxiliary Audio/Video Input
- Rear Audio RCA Inputs/Outputs
- USB Playback of MP3 Files
- 2 Zone / 4 Speaker Output
- Wireless Remote Control Included
Precautions
- Proper Power Supply: Designed for a 12 Volt DC, negative ground battery system (standard in North American vehicles).
- Disc Mechanism Protection: Avoid inserting foreign objects into the disc slot to prevent malfunction.
- Authorized Service: Do not attempt to disassemble or adjust; contact a professional for assistance.
- Moisture Avoidance: Do not expose to rain or moisture to reduce the risk of fire or electric shock.
- Cleaning: Clean the front of the unit with a slightly damp cloth only. Do not use cleansers.
- Accessories: Use only recommended accessories to reduce the risk of fire, electric shock, and interference.
- Laser Safety: This mobile DVD player is a Class I laser product. Use as instructed. Do not open covers or attempt repair. Refer servicing to qualified personnel.
Packing List
- JWM40 Unit
- Remote Control
- 20-PIN Speaker Wire
Disc Notes
Depending on recording status and conditions, some CD-Rs/CD-RWs may not play. For reliable playback, use CD-RWs with speed 1x to 4x (write 1x to 2x) and CD-Rs with speed 1x to 8x (write 1x to 2x). Do not play CD-RWs written more than 5 times. CD-R/RW discs must be finalized to play.
Compatible Disc Types
| Symbol | 12cm Disc Properties | Max Play time |
|---|---|---|
| DVD VIDEO | Single side single layer (DVD-5) | 133 minutes |
| Single side double layer (DVD-9) | 242 minutes | |
| Double side single layer (DVD-10) | 266 minutes | |
| Double side double layer (DVD-18) | 484 minutes | |
| COMPACT disc DIGITAL VIDEO | Single side single layer (VCD) | MPEG 1 Method 74 minutes |
| COMPACT disc DIGITAL AUDIO TEXT | Single side single layer | 74 minutes |
Disc Handling
- Insert label side up.
- Do not bend discs.
- Never touch the underside of the disc.
- Wipe clean from the center to the edge.
- Use only round CDs; special shapes may cause malfunction.
- Do not stick paper or tape on discs.
- Do not use discs with labels or stickers, or those with sticky residue.
- Avoid direct sunlight, heat sources, or hot vehicles.
Disc Maintenance
Clean discs with a clean cloth from center outwards. Avoid benzene, thinners, cleaning fluids, anti-static liquids, or solvents.
Installation
It is recommended to have your Jensen JWM40 installed by a reputable RV dealership. Read all instructions before beginning.
Tools and Supplies
- Phillips screwdriver
- Wire cutters and strippers
- Tools to remove existing radio (screwdriver, socket wrench set, etc.)
- Electrical tape
- Crimping tool
- Volt meter/test light
- Crimp connections
- 16 gauge wire for power connections
- 16-18 gauge speaker wire
- Four M3x20mm (3/32 x 0.75") screws
Disconnecting the Battery
To prevent a short circuit, turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the JWM40 is installed in a vehicle with an onboard computer, do not disconnect the battery cable, as computer memory may be lost. Use extra caution during installation in such cases.
Selecting the Mounting Location
Select a mounting location, avoiding:
- Places exposed to heat-radiating appliances.
- Adjacent to other equipment that radiates heat.
- Poorly-ventilated or dusty places.
- Moist or humid locations.
Preparing the Opening
Use the mounting hole diagram (approx. 7.323±0.023 inch width by 3.465±0.023 inch height) to measure and cut a mounting hole. Ensure the area behind the mounting location is clear of wires, fuel, vacuum, or brake lines. Mount the unit using four M3x20mm screws.
Wiring
The wiring diagram shows all connections required for proper operation. WARNING: Insulate any unused speaker wire ends.
Wiring Harness Pinout
| PIN NO. | WIRE COLOR | DESCRIPTION |
|---|---|---|
| 1 | VIOLET/BLACK | REAR RIGHT SPEAKER (-) |
| 2 | VIOLET | REAR RIGHT SPEAKER (+) |
| 3 | GREEN | REAR LEFT SPEAKER (+) |
| 4 | GREEN/BLACK | REAR LEFT SPEAKER (-) |
| 5 | N/A | N/A |
| 6 | GRAY | FRONT RIGHT SPEAKER (+) |
| 7 | GRAY/BLACK | FRONT RIGHT SPEAKER (-) |
| 8 | N/A | N/A |
| 9 | WHITE/BLACK | FRONT LEFT SPEAKER (-) |
| 10 | WHITE | FRONT LEFT SPEAKER (+) |
| 11 | N/A | N/A |
| 12 | N/A | N/A |
| 13 | N/A | N/A |
| 14 | BLUE | AMP REMOTE (+12VDC 100mA) |
| 15 | RED | +12VDC SWITCHED |
| 16 | BLACK | GROUND |
| 17 | N/A | N/A |
| 18 | N/A | N/A |
| 19 | N/A | N/A |
| 20 | N/A | N/A |
Connections
The diagram shows available audio/video connections: AUDIO OUTPUT, AUDIO INPUT, WIRING HARNESS CONNECTOR, RCA VIDEO OUTPUT, AM/FM ANTENNA SOCKET.
Basic Operation
Power
Press the POWER button (16) to turn the unit on or enter standby mode. The unit will resume at the last mode (Tuner, Aux, etc.) after turn on.
Volume Control
Rotate the VOL encoder knob clockwise to increase or counter-clockwise to decrease volume. The maximum setting is "40".
Audio Menu Setting
Press the AUDIO button (22) to access audio adjustments. Rotate the VOL/ENTER encoder knob to adjust:
- BAS: Bass level from "-7" to "+7".
- TRE: Treble level from "-7" to "+7".
- BAL: Speaker output balance between "L7" (left) and "R7" (right). "BAL 0" indicates equal balance.
- FAD: Speaker fade between "R7" (rear) and "F7" (front). "FAD 0" indicates equal balance between front and rear speakers.
System Menu Setting
- Press the SETTING button (23) to enter the system menu.
- Use SETTING or |<< / >>| buttons (2, 5) to navigate the menu list.
- Adjust options with the volume encoder knob within 10 seconds.
- Press the ENTER knob button (4) to confirm and exit. The unit exits automatically after 10 seconds of inactivity.
Adjustable items include:
- Beep On/Off: Toggle audible beeps for button presses. (Note: Beep tone off does not affect alarm clock.)
- LCD Brightness: Adjust from "BRI 0" (off) to "BRI 9" (brightest).
Loudness
Press the LOUD button (22) to toggle the loudness function on/off.
Mute
Press the MUTE button (3) to silence audio output. Press again to restore the previous volume level.
Liquid Crystal Display (LCD)
The LCD panel (20) displays frequency, time, and activated functions. Adjust brightness using the BRIGHT UP (34) and BRIGHT DOWN (32) buttons.
NOTE: In cold temperatures, the LCD may take longer to illuminate and visibility may decrease temporarily.
Bluetooth Setup
Setting the Bluetooth
- Bluetooth (On/Off): Choose "Bluetooth On" or "Bluetooth Off".
- Bluetooth Device: View, lock, unlock, disconnect, connect, or delete paired mobile devices.
- Bluetooth Pair: Press ENTER knob to automatically pair a device.
- PRESET Volume (PVOL): Select an automatic turn-on volume.
Reset
Press the RESET button (21) for initial installation, if function buttons do not operate, or if an error symbol appears. Use a ball point pen or similar object.
Auxiliary Input Function
Press the AUX button (14) to toggle between AUX IN1 (front) and AUX IN2 (rear). Connect a portable audio device (3.5mm cable) to the front AUX A/V IN connector (36) or rear AUDIO IN.
Auxiliary Input Connector
The front panel A/V input can connect to external audio/video sources like game players or cameras using a proper A/V cable adapter. RCA audio input is also available via the rear AUX AUDIO INPUT.
USB Interface Connector
Connect a USB mass storage device to connector (19) for playback. The unit powers on automatically and switches to USB mode. Playback resumes where paused. NOTE: USB does not support Apple device playback. It provides up to 1A charging current.
Clock Display
Press the VIEW button (25) to alternate between playback time and clock time.
Clock Setup
Press and hold the HOUR (28) or MINUTE (30) buttons to access clock setup mode. Adjust hours and minutes. The time saves five seconds after the last adjustment.
Sleep Mode
Press the SLEEP button (26) to set an automatic turn-off timer (0, 15, 30, 45, or 60 minutes).
Alarm Setting
Press and hold the ALARM button (24) for 2 seconds. Adjust hour (28) and minute (30). Press ALARM SET or ENTER knob to save. Press ALARM (24) to turn the alarm function on or off.
Remote Sensor
The infrared receiver (18) is located on the upper left of the front panel to receive signals from the remote control.
Speaker Output
Buttons (15, 17) control Zone A and Zone B speaker outputs. SPK A (Zone A) or SPK B (Zone B) will appear on the display.
Tuner Operation
Automatically Store / Preset Scan (AS/PS)
- Automatically Store: Select a band, then press and hold the AS/PS button (6) for over 3 seconds. The unit scans and stores up to 12 or 18 stations for all bands. Press AS/PS again to stop.
- Preset Scan: Select a band, then press the AS/PS button to scan stored stations. The unit pauses for 10 seconds at each station. Press AS/PS again to stop scanning.
Select a Band
- Press the AM button (7) repeatedly to select AM1 or AM2.
- Press the FM button (8) repeatedly to select FM1, FM2, or FM3.
Manual Tuning
Press the >>| or |<< buttons (5, 2) to seek stations up/down step by step.
Auto Seek Tuning
Press and hold the >>| or |<< buttons (5, 2) to automatically seek the next or previous strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each AM and FM band. To store a station, select a band (if needed) and press a preset button (1-6).
Disc Operation
Track Select
Press the >>| or |<< buttons (5, 2) to advance to the previous or next track on the disc. Press and hold for fast forward/reverse. Press the ►|| button (3) to resume normal playback.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons (5, 2) or use the remote's >>/<< buttons. Press the ►|| button (3) to end fast forward/reverse and resume normal playback.
Repeat (RPT)
Press the 4 button (33) during disc play to access repeat functions: RPT ONE (repeat track), RPT ALL (repeat all tracks), or RPT OFF.
Random Shuffle (RDM)
Press the 3x button (31) during disc play to play all tracks in random, shuffled order (RDM ON). Press again to stop random play (RDM OFF).
CD Operation
Inserting a CD
Insert a CD label-side up into the disc slot (11). The disc will begin to play automatically.
Ejecting a CD
Press the EJECT button (13) to stop CD play and eject the CD.
Pausing Playback
Press the ►|| button (3) to suspend or resume disc play.
Stop Playback
Press the 1 button (27) to suspend disc play ("PRE-STOP"). Press ►|| to resume. Press 1 button twice for "STOP".
Remote Control Direct Track Entry
Use the number pad (9) on the remote control. For single digit entries, press the number. For two digit entries, press the 10+ button followed by the last digit (e.g., for track 16, press 10+ then 6).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly:
- Press the GOTO button (25) on the remote control. The On Screen Display will show the track number highlighted.
- Use the number keys on the remote control to enter the 3-digit track number directly (e.g., for track 10, enter "010").
- Press the ENTER button (5) to confirm and begin playback.
CD Playback Information
The screen displays folder/file information and track time (remaining/total) during CD playback.
DVD Operation
DVD Title Menu
Press the MENU button (1) to go to the DVD title menu while in DVD mode.
Inserting a Disc
Insert a disc label-side up into the disc slot (11). The disc will begin to play. Press the DISC or USB button (9, 12) to alternate between USB and DVD sources.
Ejecting a DVD
Press the EJECT button (13) to stop DVD play and eject the DVD.
Pausing Playback
Press the ►|| button (3) to suspend or resume disc play.
Stop Playback
Press the 1 button (27) to suspend disc play ("PRE STOP"). Press ►|| to resume. Press 1 button twice for "STOP".
Track Select
Press the >>| or |<< buttons (5, 2) to advance to the next or previous track on the disc.
Enter/Select
While in menu mode, press the ENTER button (4) to select a menu option.
Language Selection
While playing a DVD, press the 6/FOLDER UP button (37) to change the DVD audio language.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons (5, 2) or remote >>/<< buttons. Press the ►|| button (3) to end fast forward/reverse and resume normal playback.
Repeat Chapter/Title
Press the 4 button (33) or RPT button (20) on the remote control multiple times during playback to select repeat options: DVD: RER Chapter, RER Title, RPT ALL, RPT OFF.
DVD Playback Features
The remote control offers features for DVD playback:
- LANG: Choose alternate audio language, if available.
- SUBTITLE: Select alternate subtitle language, if available.
- ANGLE: Select alternate viewing angle, if available.
- ZOOM: Zoom the picture (ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM 1/3, ZOOM 1/4) or select OFF to return to normal view.
DVD Playback Information
The screen displays DVD playback information, including Title (current/total) and Chapter (current/total).
Remote Control Direct Track Entry
Use the number pad (9) on the remote. For single digit entries, press the number. For two digit entries, press 10+ then the last digit.
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly:
- Press the GOTO button (25) on the remote control.
- Use the number keys to enter the 3-digit track number directly (e.g., "010").
- Press the ENTER button to confirm and begin playback.
MP3/USB Operation
Connecting a USB mass storage device automatically powers on the unit and switches to digital file playback. Playback resumes where paused. NOTE: Smart phone playback is not supported via USB; use Bluetooth. 1A charging is supported.
MP3 Monitor Display
The screen shows a file list with icons for Audio, Photos, and Video.
Inserting a USB Device
Connect a USB device to connector (19). The LCD displays "LOADING" and "USB". Playback begins. Press the USB button (12) to enter USB playback mode directly. NOTE: MP4 video format is not supported.
Play/Pause
Press the ►|| button (3) to suspend or resume disc play.
Track Select
Press the >>| or |<< buttons (5, 2) to search for the previous/next file. The selected file number appears on the display.
Folder Up/Down
Press and hold the 6/FOLDER UP button (37) to access a higher folder level. Press and hold the 5/FOLDER DOWN button (35) to access a lower folder level.
Repeat (RPT)
Press the 4 button (33) or RPT button (20) on the remote control multiple times for repeat options: RPT 1 (track), RPT DIR (folder), RPT ALL (disc), RPT OFF.
Random Shuffle (RDM)
Press the 3x button (31) during song playback to play all files in random, shuffled order (RDM ON). Press again to stop random play.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons or remote >>/<< buttons. Press the ►|| button (3) to end fast forward/reverse and resume normal playback.
Remote Control Direct Track Entry
Use the number pad (9) on the remote. For single digit entries, press the number. For two digit entries, press 10+ then the last digit.
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly:
- Press the GOTO button (25) on the remote control.
- Use the number keys to enter the 3-digit track number directly (e.g., "010").
- Press the ENTER button (5) to confirm and begin playback.
MP3 Playback Information
The screen displays folder/file information and track time (remaining/total) during MP3 playback.
Bluetooth Operation
The JWM40 includes built-in Bluetooth technology for streaming audio playback from Bluetooth-enabled devices.
About Bluetooth Technology
Bluetooth is a short-range wireless radio protocol operating in the 2.4 GHz range, transmitting audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
Bluetooth Menu Options
NOTE: Some options are available only when the unit is in Bluetooth Audio mode.
Press and hold the BT button (10) to enter menu adjustment mode. Use >>| or |<< buttons (5, 2) or SETTINGS button (23) to access "Bluetooth On/Off". Rotate the volume encoder knob to select BLUETOOTH ON, then press ENTER (12) to turn the function On or Off.
Pairing a Bluetooth Device
Before pairing, consult the owner's manual for your Bluetooth device.
- Press the BT button (10) to enter Bluetooth mode.
- Press and hold the BT button to start pairing (approx. 120 seconds). The JWM40 will display "PAIR".
- On your device's Bluetooth settings, select "JWM40" to connect.
- If prompted for a password, enter "0000".
After successful connection, you can listen to audio from your Bluetooth device through the JWM40.
Bluetooth Audio (A2DP)
A2DP music is available for Bluetooth-enabled phones. Press the BT button (10) to enter Bluetooth mode and play songs. "BT PAUSE" will display on the LCD.
Selecting Tracks
During playback, press the >>| or |<< button (5, 2) to play the previous or next track.
Pausing Playback
Press the ►|| button (3) to pause Bluetooth audio playback. "BT PAUSE" will appear on the LCD. Press ►|| again to resume playback. Changing modes pauses playback. Press the BT button (10) to return to Bluetooth mode and resume playback. NOTE: If a Bluetooth device disconnects due to power off or out of range, the unit will automatically search for the device when power is restored.
Remote Control Operation
The following table details the functions of the remote control for various modes:
| REF | DESCRIPTION | TUNER | BLUETOOTH | CD/MP3/USB | DVD |
|---|---|---|---|---|---|
| 1 | Power | Turn radio on/standby mode. | Turn radio on/standby mode. | Turn radio on/standby mode. | Turn radio on/standby mode. |
| 2 | VOL +/- | Adjust volume up/down. Press for Audio Control Setup menu. | Adjust volume up/down. Press for Audio Control Setup menu. | Adjust volume up/down. Press for Audio Control Setup menu. | Adjust volume up/down. Press for Audio Control Setup menu. |
| 3 | TUNE + | Tune to higher station. | |||
| 4 | TUNE - | Tune to lower station. | |||
| 5 | ENTER | Turn the alarm feature on/off. | Turn the alarm feature on/off. | Confirm menu selection. | Confirm menu selection. |
| 6 | ALARM | Turn the alarm feature on/off. | Turn the alarm feature on/off. | Turn the alarm feature on/off. | Turn the alarm feature on/off. |
| 7 | LANG | Select alternate audio language, if available. | Select alternate audio language, if available. | ||
| 8 | Numeric Keyboard | Use 1-6 to access preset stations. | Enter track number to access track directly. For track Number > 10, use 10+ followed by second digit. | Enter track number to access track directly. For track Number > 10, use 10+ followed by second digit. | |
| 9 | Setup | View SETUP menu. | View SETUP menu. | View SETUP menu. | |
| 10 | Subtitle | Choose subtitle language, if available. | Choose subtitle language, if available. | ||
| 11 | Mute/LOUD | Silence Audio output. Press and hold to turn LOUDNESS feature on/off. | Silence Audio output. Press and hold to turn LOUDNESS feature on/off. | Silence Audio output. Press and hold to turn LOUDNESS feature on/off. | Silence Audio output. Press and hold to turn LOUDNESS feature on/off. |
| 12 | Eject | Eject Disc. | Eject Disc. | Eject Disc. | Eject Disc. |
| 13 | Previous/Next | Select next/previous track. | Select next/previous track. | Select next/previous chapter. | Select next/previous chapter. |
| 14 | Directional Buttons | Move to desired menu item and then press ENTER to confirm. | Use with DVD menu to move to desired menu item and then press ENTER to confirm. | ||
| 15 | Fast Reverse/ Forward | Fast Forward 2X, 4X, 8X, 20X. Fast Reverse 2X, 4X, 8X, 20X. | Fast Forward 2X, 4X, 8X, 20X. Fast Reverse 2X, 4X, 8X, 20X. | Fast Forward 2X, 4X, 8X, 20X. Fast Reverse 2X, 4X, 8X, 20X. | |
| 16 | Play/Pause | Pause/resume playback. | Pause/resume playback. | Pause/resume playback. | Pause/resume playback. |
| 17 | Stop | Stop playback. | Stop playback. | Stop playback. | |
| 18 | TITLE | Press to view title menu. Use directional arrows and play button to play selected title. May not be supported by all discs. | |||
| 19 | RPT | Repeat track. | Repeat track. | Repeat track. | Repeat chapter. |
| 20 | SOURCE | Select source for playback. | Select source for playback. | Select source for playback. | Select source for playback. |
| 21 | ZOOM | Zoom picture or press repeatedly to change magnification level. | |||
| 22 | ANGLE | Select alternate viewing angle, if available. | |||
| 23 | AUD | Access Audio Menu options. | Access Audio Menu options. | Access Audio Menu options. | Access Audio Menu options. |
| 24 | GOTO | Select exact time, track or chapter for playback. | Select exact time, track or chapter for playback. | Select exact time, track or chapter for playback. | |
| 25 | Display | Display current playback information on the screen. | Display current playback information on the screen. | Display current playback information on the screen. | |
| 26 | AS/PS | Browse preset stations (10 sec. interval). Press and hold to scan/store stations. | |||
| 27 | MENU | Access system MENU. | Access system MENU. | Access system MENU. | Press to access system MENU. Press and hold to access DVD MENU. |
DVD Settings
Press the (setup) button (10) on the remote control to access the Settings menu and adjust system settings:
- Audio Language: English, Chinese, Japanese, French, Spanish, Portuguese, Latin, or German.
- Subtitle Language: On/Off.
- Menu Language: English, Chinese, Japanese, French, Spanish, Portuguese, Latin, or German.
- Password: 4-digit password.
- Rating: Select parental control level (Kid Safe > Adult). Security password required for changes.
- Aspect Ratio: 4:3 PS, 4:3 LB, 16:9.
Care and Maintenance
- Keep the product dry. Wipe immediately if it gets wet.
- Keep away from dust and dirt, which can cause premature wear.
- Handle the product gently and carefully. Dropping it can damage components.
- Wipe with a dampened cloth occasionally. Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Use and store the product only in normal temperature environments. High temperatures can shorten the life of electronic devices and damage parts.
Ignition Noise
Ignition systems are a common source of reception noise, varying with engine speed. Use radio suppression type high voltage ignition wire and suppressor resistors for suppression.
Interference
Radio reception in moving environments differs from stationary ones. AM reception can be affected by bridges or high voltage lines but has better long-distance reception.
Troubleshooting
| Symptom | Solution |
|---|---|
| Radio will not turn ON or No front panel operation | Try the reset button. Check fuse. Check 12V+ on accessory wire (RED wire). Check Ground. |
| Radio turns ON, but no sound | Verify Volume, Fader/Balance, Mute controls are set correctly. Try the reset button. Verify proper speaker selection and connections. Check speaker wires for shorts or opens. Ensure unit has power and no other CD/DVD is inside. |
| CD/DVD does not load fully | Ensure transport screw has been removed from the rear of the unit. Make sure disc is inserted correctly. Verify disc is free from dirt, scratches, etc. Check factory CDs. Inspect chassis for shipping screws. Check factory CDs for compatibility warnings. |
| CD/DVD does not play correctly | Verify you are tuned to a valid station. Check antenna connection. Try a different antenna. |
| No AM or FM reception | Verify you are tuned to a valid station. Check antenna connection on rear of stereo. Try a different antenna. |
| DVD plays sound but no video | Ensure the HDMI cable is routed from the HDMI output to the input on the television. |
| Unit does not respond to Remote Control | Verify you have a clear line of sight for the IR signal. Check the batteries. Confirm the remote IR sensor is plugged into the IR input (if applicable). |
Specifications
FM Tuner
- Frequency Coverage (USA): 87.5 to 107.9 MHz
- Sensitivity: <4 µV
- Stereo Separation@1 kHz: >25 dB
AM Tuner
- Frequency Range (USA): 530-1710 kHz
- Sensitivity (S/N=20dB): <63 µV
Amplifier
- Output Power: 6W RMS x 4
- Output Impedance: Compatible with 4-8 Ω speakers, 4 ohm load minimum
DVD
- Frequency Response: 20-20,000 Hz
- Channel Separation: 50 dB
- S/N Ratio: 65 dB
- Distortion: 0.5%
General
- Power Supply Requirements: DC 12 Volts, Negative Ground
- Operating Voltage: 11-16 VDC
- Overall Dimensions: 208mm (W) x 110.0mm (D) x 130.0mm (H) / 8.19" (W) x 4.33" (D) x 3.39" (H)
- Mounting Dimensions: 180mm (W) x 133mm (D) x 86mm (H) / 7.09" (W) x 5.2" (D) x 3.39" (H)
- Weight: 1.45 KG / 3.20 lbs.
FCC Notes
WARNING: Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation. If interference occurs, try reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install with minimum 20cm separation between the radiator and your body.
NOTE: The manufacturer is not responsible for radio or TV interference caused by unauthorized modifications.
