beatXP Tune Xpods

beatXP Tune Wireless Earphones

Please read the manual carefully before using the product and keep it safe for future references.

Know Your Device

Thank you for purchasing Tune Xpods. This user manual will assist you about how to make the best use of your XPods.

Earbud Components:

• Mic 1, Mic 2, Mic 3, Mic 4: Microphones for calls and voice commands.
• Indicator: LED light indicating status.
• Touch Functional Area: Area for controlling music, calls, and voice assistant.

Charging Case Components:

• Charging Case Indicator: LED light indicating charging status of the case.
• Type-C Charging Port: Port for charging the case.

What's in the Box

• 1 X Charging Case
• 1 X Type-C Cable
• 2 X Bluetooth Earbuds
• 2 X Extra Eartips (2 Pairs)
• 1 X User Manual Card
• 1 X Product Catalogue
• 1 X Sticker
• 1 X Offer Card
• 1 X Warranty Card

Instructions

How To Connect?

1. Take your earbuds out of the case to power them ON.
2. Turn ON the Bluetooth on your mobile phone and search for active devices.
3. Select "beatXP Tune Xpods". Now your earbuds are connected to your phone and are ready to use.

Usage Guidelines

1. The earbuds need to be fully charged prior to first-time use. If you're not using the product for a long time, make sure you charge it every 30 days to keep the product active.
2. Use the earbuds at a comfortable hearing volume. This prevents any hearing damage.
3. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
4. Avoid using the earbuds while driving.
5. For safety purposes, avoid using the earbuds in environments where you need to be aware about the surrounding noise.
6. This product is assembled using small parts, hence keep it out of the reach of children.
7. This product is assembled using magnetic components. Please consult your doctor if you feel it's affecting any implantable medical equipment.
8. If the product seems to not be working, please contact customer support. Don't try to fix it yourself.
9. It is recommended to dispose of batteries properly by abiding to local regulations.
10. Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.

Charging Earbuds

Charging: When put into the charging case, the white LED of earphones are turned ON, indicating that the earbuds are charging.

Fully Charged: When the earbuds are fully charged, the LED of earbuds will turn OFF.

Charging the Case

Charging: Plug-in the TYPE-C charging cable to charge the case. The red LED of the charging case will start flashing, indicating that the case is charging.

Fully Charged: When fully charged, the red LED of the charging case will stop flashing.

LED Status Indicators:

Product Specifications

Touch Controls

Music

• One Tap: Play/Pause
• Double Tap: Next Track
• Triple Tap: Previous Track

Calling

• One Tap: Answer Call
• Double Tap: End/Reject Call

AI Voice Assistant

Press and Hold for 2s

Reset

Press and Hold for 5s (Both Earbuds)

Buds ON/OFF

Automatically ON when removed from the case, OFF when the buds are put into the case.

Troubleshooting

1. Unable to Power ON: Try charging the earbuds for 30 min and try again.
2. Unable to Pair: Go to the Bluetooth Settings on your mobile phone, click on "Forget Device" for beatXP Tune Xpods and put the case on charge. After 30-45 minutes, try again.
3. Unable to Connect to Mobile: Place earbuds into the charging case. Turn OFF Bluetooth on mobile and Turn ON again. Take earbuds out of the case and try again.
4. Unable to Charge: Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pin point.
5. Only one earbud working/Either of the one not working simultaneously: Go to your mobile phone's Bluetooth Menu and click on "Forget Device" or "Disconnect" your earphones and put them back into the charging case. Then take the earbuds out of the case and try again.