beatXP Echo Xpods User Manual

Introduction

Thank you for purchasing beatXP Echo Xpods. This user manual will assist you in making the best use of your XPods.

Please read this manual carefully before using the product and keep it safe for future references.

Know Your Device

The beatXP Echo Xpods are wireless earphones designed for an immersive audio experience. Below is a breakdown of the device components:

Each earbud features an Indicator light, a Touch Functional Area for controls, and multiple microphones (labeled Mic1, Mic2, Mic3, Mic4 in the diagram, suggesting a total of four microphones across both earbuds). The charging case includes a Charging Case Indicator light and a Type-C Charging Port.

What's in the Box

• 1 X Charging Case
• 1 X Type-C Cable
• 2 X Bluetooth Earbuds
• 2 X Extra Eartips (2 Pairs)
• 1 X User Manual Card
• 1 X Product Catalogue
• 1 X Sticker
• 1 X Offer Card
• 1 X Warranty Card

Instructions

How To Connect?

1. Take your earbuds out of the case to power them ON.
2. Turn ON the Bluetooth on your mobile phone and search for active devices.
3. Select 'beatXP Echo Xpods'. Your earbuds are now connected to your phone and ready to use.

Usage Guidelines

1. Ensure earbuds are fully charged before first-time use. If not using for a long time, charge them every 30 days.
2. Use earbuds at a comfortable hearing volume to prevent hearing damage. Start with low volume and gradually increase.
3. Avoid using the earbuds while driving.
4. For safety, do not use earbuds in environments where awareness of surrounding noise is critical.
5. This product contains small parts; keep out of reach of children.
6. The product uses magnetic components. Consult a doctor if you have implantable medical equipment.
7. If the product is not working, contact customer support; do not attempt self-repair.
8. Dispose of batteries properly according to local regulations.
9. Any repair or maintenance must be done by authorized personnel to maintain warranty.
10. Avoid high voltage smartphone chargers. Chargers with a capacity of 5V-10V are suitable for charging XPods.

Charging

Charging Earbuds

When placed in the charging case, the white LED on the earphones turns ON, indicating they are charging.

When fully charged, the earbud LED will turn OFF.

Charging the Case

Plug in the Type-C charging cable. The red LED on the charging case will flash, indicating it is charging.

When fully charged, the red LED on the charging case will stop flashing.

LED Indicators:

Earbuds

• Red LED ON: Charging
• Red LED OFF: Fully Charged
• Red LED Flashing: Low Battery

Charging Case

• Red LED ON: Charging
• Red LED OFF: Fully Charged
• White LED Flashing: Low Battery

Product Specifications

Touch Controls

Music Controls

• One Tap: Play/Pause
• Double Tap: Next Track
• Triple Tap: Previous Track

Calling Controls

• One Tap: Answer Call
• Double Tap: End / Reject Call

AI Voice Assistant

Press and Hold for 2s

Reset

Five Times Tap (Both Earbuds)

Mode Change

Four Times Tap

Buds ON/OFF

Automatically ON when removed from the case, OFF when the buds are put into the case.

Troubleshooting

1. Unable to Power ON

   Try charging the earbuds for 30 minutes and try again.

2. Unable to Pair

   Go to your mobile phone's Bluetooth Settings, click on 'Forget Device' for beatXP Echo Xpods, and put the case on charge. After 30-45 minutes, try again.

3. Unable to Connect to Mobile

   Place earbuds into the charging case. Turn OFF Bluetooth on your mobile and Turn ON again. Take earbuds out of the case and try again.

4. Unable to Charge

   Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pin point.

5. Only one earbud working / Either of the one not working simultaneously

   Go to your mobile phone's Bluetooth Menu, click on 'Forget Device' or 'Disconnect' your earphones, and put them back into the charging case. Then take the earbuds out of the case and try again.