DX Sentai Ring Wild Goju Wolf Instruction Manual

About This Manual

This is a WEB instruction manual for the DX Sentai Ring Wild Goju Wolf.

For frequently asked questions regarding "Number Sentai Gojuu-ger" related toys, please visit the provided link.

Communication charges apply.

Images in this manual are for illustrative purposes only.

This product requires new button batteries. Approximate continuous use time is about 60 minutes.

Package Contents

Sentai Ring Wild Goju Wolf Set: 1

Parts Identification

Sentai Ring Wild Goju Wolf

Front View: Scope
Back View: LED, Cover Parts, Button

Replacing Button Batteries

Note: This procedure should be performed by a guardian.

Important: Always use new button batteries. Mixing used and new batteries, or different types of batteries, may cause malfunction or premature battery depletion.

Battery Life: Approximately 60 minutes of continuous use.

Indicator: If the LED flickers, the batteries may be depleted. Replace with new button batteries.

Steps for Battery Replacement:

Remove the cover parts by sliding them in the direction of the arrow.
Remove the battery cover:
- Unscrew the battery cover using a Phillips (+) or flathead (-) screwdriver.
- Slide the battery cover in the direction of the arrow.
Insert new button batteries:
- Remove old batteries.
- Insert two new LR41 button batteries (sold separately), paying attention to the polarity (+/-).
Replace the battery cover:
- Align the protrusions on the battery cover with the grooves on the main unit.
- Secure the battery cover by turning the screw in the opposite direction of removal.
Reattach the cover parts by sliding them in the direction of the arrow.

Battery Installation Note: Ensure the positive (+) side of the battery is facing upwards and the negative (-) side is facing downwards.

Attaching and Detaching Ring Parts

How to Attach Ring Parts:

Select the ring parts and slide them into place in the direction of the arrow.

Ring Parts (Small)
Ring Parts (Large)

Note: Use the large ring parts if the small ring parts are too tight or cannot be worn. For loading into the DX Tega Sword, use the small ring parts.

How to Detach Ring Parts:

Slide the ring parts in the direction of the arrow to remove them.

Note: The small ring parts are attached during packaging.

Preparing to Play

Sentai Ring Wild Goju Wolf Preparation:

There are anti-deformation tapes on the top of the expandable parts on both sides. Please remove and discard these tapes before playing.

Left Side
Right Side

Returning the Sentai Ring Wild Goju Wolf Parts:

Return the parts of the Sentai Ring Wild Goju Wolf by hand.

How to Play with the Sentai Ring Wild Goju Wolf:

Press the button on the Sentai Ring Wild Goju Wolf. The LED will light up and the toy will transform. If returning to the original state, move the expanded parts back in the opposite direction of the arrow.

Back View: Button

Transformation Play with Wild Goju Wolf

Use the Sentai Ring Wild Goju Wolf. Ensure the small ring parts are attached.

Use the separately sold DX Tega Sword.

Press the button on the Sentai Ring Wild Goju Wolf. The LED will light up and transform. The LED will turn off after approximately 15 seconds.
Insert the Sentai Ring Wild Goju Wolf into the ring loading area of the Tega Sword main unit. The LED will light up and play the "Transformation Sound".

Note: When attaching the Sentai Ring, insert it straight into the Tega Sword. Otherwise, the LED may not light up or the toy may not transform.

Note: When detaching, follow the reverse procedure.

Wild Power Up!

Tega Sword Attack Play

This is for when you have completed the transformation play with the Tega Sword.

Briefly press the button on the grip of the Tega Sword main unit. The "Slash Sound" will play.

Tega Sword Special Move Play