Shenzhen Buzz Tech P66 Smartwatch

Appearance Description

The smartwatch features a short watchband and a long watchband. Key components include a side button (used for startup, shutdown, and returning to the previous screen), charging contacts on the back, a green light sensor, a touch area, and a full-screen display.

Introduction to Watch Functions

• Do Not Disturb [mute/unmute]
• Brightness adjustment [brightness]
• Search function [magnifying glass]
• Call Bluetooth switch [phone/bluetooth]
• Theme mode switch [theme]
• Setting [gear]

Charging Instructions

The charging process involves a magnetic charging cable with a USB port on one end and a magnetic connector on the other. To charge, align the magnetic connector with the charging contacts located on the back of the watch. The diagram shows the magnetic charging cable connecting to the watch and a USB power source.

Important Notes for Charging:

• Please use the product-specific magnetic charging cable.
• Do not use a power adapter with a voltage exceeding 5V and an output current exceeding 1A, as this may cause charging failure and damage to the charging cable or the device.
• Please activate the watch when it runs out of power before charging; the watch screen will only light up after approximately 5 minutes of normal charging.
• Do not charge with water stains present.
• Please charge with the matching charging cable.

Main Interface

Displays the current time, date, steps, and other information. Long press the main interface to switch the main dial left and right, and click to confirm.

Call Function

Click the call switch. Open phone settings -> Bluetooth -> search and connect to Bluetooth P66-xxxx to play mobile music or make/receive calls.

Steps

Displays the current steps, distance, and calories recorded by the watch.

Heart Rate

Slide to this page and remain still for a while to automatically measure the current real-time dynamic heart rate. Connect to the companion APP to set real-time monitoring and view data records.

Blood Pressure

Slide to this page and remain still for a while to automatically measure the current blood pressure data. The watch will vibrate [vibration] to indicate the result. Connect to the APP to view offline measurement data or synchronized online measurement data.

Blood Oxygen

Slide to this page and remain still for a while to automatically measure the current blood oxygen data. The watch will vibrate [vibration] to indicate the result.

Exercise

Click the icon on this page to access multiple sport modes. Select a sport mode, click the icon to start, and slide right [arrow right] to pause or stop the sport.

Sleep

The watch can record and display your sleep duration from the previous night, including time spent in deep sleep and light sleep. More detailed data can be viewed synchronously in the companion APP.

Weather

Displays local weather conditions. Connect to the synchronization APP for normal use. Ensure your phone's GPS is enabled and the APP has positioning permission and network connection.

Messages

The watch can receive notifications for cell phone calls, SMS, QQ, WeChat, and other alerts. These can be configured via the APP by enabling the corresponding push switch. This page can store up to 8 message records. This function requires a stable connection to the phone and appropriate APP permissions.

Music Control

After connecting to the APP, the watch can control the mobile phone player to play/pause/switch to the previous or next song. The mobile phone player must be open before control is possible. This function requires staying connected to your phone and enabling notification push permissions.

Stopwatch

Click the icon to start the stopwatch function. Click 'Start' for timing, pause, or reset. Slide right [arrow right] to exit.

Search Phone

Click this icon, and your phone will beep [bell] to indicate its location. This function requires your phone to stay connected with the watch APP. No alert will sound on the phone if it is in silent mode.

Settings

Click the icon to access settings. Swipe left and right to adjust brightness, reset to factory data, turn off the watch [power off], and view watch information [info].

Watch APP Installation and Connection

As a Bluetooth product, most of this device's functions require connection to a dedicated APP for normal use, such as time display, call alerts, and message alerts. For Android phones, do not connect or pair with the watch directly via the phone's Bluetooth settings. Instead, scan the provided QR code [qr code] to select the version suitable for your mobile phone system or download and install the "Glory Fit" app from major application markets.

Device Connection Steps

Before using the APP, ensure your mobile phone's Bluetooth and GPS positioning are turned on to grant the APP positioning permission. Once connected, a prompt will appear: "To pair with: P66", please select pairing.

Connection Process:

1. Open the Glory Fit APP and follow the on-screen prompts to complete initial settings.
2. Click [Select Device] to search for the watch.
3. Select the name of the searched Bluetooth device: P66.
4. Connection succeeded.

Notes:

• For Android users: The APP must be granted permissions and allowed to run in the background to ensure optimal user experience.
• For iOS users (iPhone iOS 13 and below): After connecting to the APP, you may need to connect to P66 a second time within the phone's Bluetooth settings to enable functions like making calls and playing multimedia music.

Precautions

• Do not charge if there are water stains on the device or cable.
• This product is an electronic monitoring device, not intended for medical use. Measurement data is for reference only.
• It is not recommended to wear the watch during hot water baths or prolonged swimming.
• Always use the matching charging cable provided with the product.

Frequently Asked Questions (FAQ)

1. Watch cannot be searched in the APP, or time synchronization fails.

Answer:

• Ensure your phone's Bluetooth and GPS positioning are enabled before first use.
• Grant positioning permission to the APP via phone settings (Phone Settings -> Applications).
• If the watch is already paired via phone Bluetooth, cancel the pairing first, then search and connect within the APP.
• If the watch has been idle for a long time, Bluetooth may enter a dormant state. Turn off Bluetooth on both the watch and phone, wait about 1 minute, then re-enable and try searching in the APP again.
• The watch must be connected to the APP for functions like step counting, sleep tracking, and time synchronization to work correctly.

2. No alert function on the watch.

Answer (First-time use):

For Android users: Follow the on-screen prompts, enable the information reminder function in the APP, and grant APP notification permissions as requested.

For Apple users: After connecting the watch to the APP, a pairing request will appear on your phone; select 'Allow' to pair. In the APP, enable the notification switches for the applications you wish to receive alerts from. Additionally, ensure notification permissions are granted in your phone's settings (Phone Settings -> Notification -> select the relevant app).

3. Reminder switch is on, but no reminders or sporadic reminders on the watch.

Answer: Ensure that the phone has enabled message notifications and corresponding notification permissions as per the instructions above. Keep Bluetooth on and maintain a connection between the APP and the watch. If issues persist, the system's authorized APP alert function might be malfunctioning; re-check the message push function settings.

4. Android phone Bluetooth disconnects frequently or loses message alerts after a period.

Answer: Android systems may periodically clean up background applications or power-consuming apps. If the APP is not configured to run in the background, it can be easily closed by the system, leading to Bluetooth disconnection. Settings for background app execution vary by Android device. For example, on a Huawei nova 8 SE: navigate to Settings -> Battery -> Power Consumption Ranking -> APP -> Application Launch Management -> Manually manage background running.

5. Watch cannot measure, or data is inaccurate.

Answer:

• Before measurement, sit down and relax, keeping your arms level with your chest.
• Adjust the watch's tightness so the back of the watch is close to the skin to prevent light leakage from the optical sensor.
• Remain calm during measurement. Talking, coughing, sneezing, or other movements can affect measurement accuracy.

Regulatory Compliance

Canada (IC)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and complies with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

USA (FCC)

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.