P99 Smart Watch User Manual

Appearance Description

The smart watch features a full-screen touch area, a side button for startup, shutdown, and returning, a short and long watchband, a thimble for charging, and a green light sensor.

Introduction to Watch Functions

• Talking Bluetooth on/off
• Theme mode switching
• Do not disturb on/off
• Mute mode
• Brightness setting
• Wrist lift screen on/off
• Find cell phone function
• Screen lock
• Settings

Main Interface

There are 5 main interfaces available. The main interface displays the current time, date, and steps. Press and hold the main interface to switch between dials and click to confirm.

Schematic Diagram of Charging

To charge the watch, use the magnetic charging cable provided. Align the cable with the charging contacts on the back of the watch. Do not use power adapters exceeding 5V or 1A to prevent charging failure or damage. Allow approximately 5 minutes for the watch screen to light up after starting to charge if the battery was depleted.

Charging Precautions:

• Do not charge with water stains.
• Keep the charging contacts clean.

Watch Functions Explained

• Steps: Displays current steps, distance, and calories.
• Heart Rate: Measures real-time dynamic heart rate. Connect to the APP for continuous monitoring and data records.
• Blood Oxygen: Measures blood oxygen data and vibrates to indicate the result.
• Exercise: Access multiple sport modes. Select a sport, start, pause, or stop it by sliding right.
• Sleep: Records and displays sleep time, deep sleep, and light sleep. Detailed data is available in the APP.
• Weather: Displays local weather. Requires APP connection, phone GPS, and network access.
• Message: Receives call, SMS, QQ, and WeChat notifications. Stores up to 8 messages. Requires phone connection and APP permissions.
• Music: Controls the mobile phone player (play/pause, next/previous song). Requires the phone player to be open and connected to the watch via the APP with notification push enabled.
• Stopwatch: Starts, pauses, and resets timing. Slide right to exit.
• Search: Makes the phone beep to help locate it. Requires phone connection to the watch APP. No alert in silent mode.
• Settings: Access menu style, brightness, factory reset, power off, and watch information.

Watch APP Installation and Connection

Most functions require connection to the special GloryFit APP. Download and install the GloryFit app by scanning the QR code or searching in app markets. For Android phones, do not pair directly via Bluetooth; use the app. For iPhone iOS 13 and below, after connecting in the app, a second connection to 'P98' is needed in phone Bluetooth settings for call and multimedia functions.

Device Connection Steps:

1. Open the APP and follow prompts.
2. Click [Select Device] to search.
3. Select the Bluetooth name 'P98'.
4. Connection succeeded.

Notes:

• Android users: Ensure the APP has background running permissions for optimal experience.
• iPhone users (iOS below 13): Perform a second Bluetooth pairing in phone settings for full functionality.

Precautions

• This product is an electronic monitoring device, not for medical use. Measurement data is for reference only.
• Avoid wearing during hot water baths and prolonged swimming.
• Use the matching charging cable.
• Ensure charging contacts are clean.

FAQ

1. Watch not found or not syncing: Ensure Bluetooth and GPS are on, APP has positioning permission, cancel previous Bluetooth pairings if any, and try restarting Bluetooth on both devices. The watch must be connected to the APP for proper function.
2. No alert function: For Android, enable notification reminders in the APP and grant notification permissions. For Apple, allow pairing requests and enable desired app notifications in the APP and phone settings.
3. Intermittent or no reminders: Verify message notifications and permissions are enabled, Bluetooth is on, and the APP and watch are connected. Check system-authorized app alert functions.
4. Android Bluetooth disconnects or loses alerts: Set the APP to allow background running to prevent system cleanup. The method varies by Android phone model.
5. Inaccurate measurements: Sit calmly before measuring, ensure the watch is snug against the skin, and remain still during measurement.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. This equipment has been tested and complies with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.