Appearance Description
The smartwatch features a full-screen touch area for interaction. It has a side button that serves as the startup/shutdown and return function. The watchband consists of a short and a long section.
Schematic Diagram of Charging
To charge the watch, use the product-specific magnetic charging cable. Align the magnetic charging cable's contacts with the charging contacts located on the back of the watch. The cable connects to a USB port. Ensure the charging contacts are clean and dry before connecting. The watch requires activation when out of power; the screen will light up after approximately 5 minutes of charging.
Charging Precautions:
- Do not charge the device if there are water stains present.
- Use a power adapter with a voltage not exceeding 5V and an output current not exceeding 1A. Using higher specifications may cause charging failure or damage the device or cable.
Introduction to Watch Functions
The main interface displays the current time, date, steps, and other information. Press and hold the main interface to switch the main dial left and right, then click to confirm your selection.
Core Functions:
- Do Not Disturb On/Off: Toggle the Do Not Disturb mode.
- Brightness Adjustment: Adjust the screen brightness.
- Search Function: Locate your connected phone.
- Call Bluetooth Switch: Enable/disable Bluetooth for calls.
- Theme Mode Switch: Change the watch face theme.
- Setting: Access device settings.
Detailed Functions:
- Call Function: Click the call switch. To use call functions, open your phone's settings, navigate to Bluetooth, and search for and connect to "Y6". This enables mobile music playback and making/receiving calls.
- Steps: Displays current steps taken, distance covered, and calories burned.
- Exercise: Access multiple sport modes by clicking the exercise icon. Select a sport mode, click to start, and slide right to pause or stop the activity.
- Sleep: The watch records and displays your sleep duration from the previous night, including time spent in deep sleep and light sleep. More detailed data can be viewed by synchronizing with the companion APP.
- Weather: Displays local weather conditions. For accurate weather information, connect to the synchronization APP, ensure the phone's GPS is enabled, and grant the APP positioning permissions and network access.
- Message: Receive notifications for incoming calls, SMS, QQ, WeChat, and other alerts from your phone. These can be configured via the APP's message alert settings. The watch can store up to 8 message records. This function requires a continuous connection to the phone and appropriate APP permissions.
- Music: After connecting to the APP, the watch can control the mobile phone's music player for play/pause and skipping tracks (previous/next). The music player on the phone must be open and ready for control. This function requires an active phone connection and notification push permissions enabled in the APP.
- Stopwatch: Click the stopwatch icon to start the function. Use the Start button for timing, pausing, or resetting. Slide right to exit the stopwatch.
- Heart Rate: Slide to this page and remain still for a moment to automatically measure your current dynamic heart rate. Connect to the APP to enable real-time monitoring and view historical data records.
- Blood Oxygen: Slide to this page and remain still for a moment to automatically measure your blood oxygen data. The watch will vibrate to indicate the result.
- Setting: Access settings by clicking the icon. Swipe left and right to adjust brightness, reset factory data, turn off the watch, and view watch information.
Watch APP Installation and Connection Instructions
As a Bluetooth product, most of the watch's functions, such as time display, call alerts, and message alerts, require connection to a dedicated APP. For Android phones, do not pair directly via the phone's Bluetooth settings. Instead, scan the provided QR code (not visible in OCR) to download and install the "Glory Fit" APP suitable for your mobile phone system, or find it in major application markets.
Device Connection
Before using the APP, ensure your mobile phone's Bluetooth and GPS positioning are turned on to grant the APP necessary positioning permissions. After a successful connection, a prompt "To pair with: Y6" will appear; select pairing.
Connection Steps:
- Open the APP and follow the on-screen prompts for initial setup.
- Click [Select Device] to search for the watch.
- Select the name of the searched Bluetooth device: "Y6".
- Connection succeeded.
Notes:
- For Android users, the APP must be granted permissions and allowed to run in the background to ensure optimal user experience.
- For iPhone users with iOS 13 or earlier, after connecting within the APP, you need to perform a second connection to "Y6" in the phone's Bluetooth settings to enable call and multimedia music functions.
Precautions
- Do not charge the device if there are water stains.
- This product is an electronic monitoring device, not a medical instrument. Measurement data is for reference only.
- It is not recommended to wear the watch during hot water baths or prolonged swimming.
- Always use the matching charging cable provided with the product.
FAQ
1. Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the phone's time.
Answer:
- Ensure your phone's Bluetooth and GPS positioning are enabled before first use.
- The APP requires positioning permission. Check this in your phone's Settings > Applications.
- If the watch has already been paired via the phone's Bluetooth settings, cancel the pairing first, then search and connect within the APP.
- If the watch has been idle for a long time, its Bluetooth may enter a dormant state. Turn off Bluetooth on both the watch and phone, wait about 1 minute, then re-enable and try searching in the APP again.
- The watch must be connected to the APP for functions like steps, sleep tracking, and time synchronization to work correctly.
2. There is no alert function on the watch.
Answer: For first-time use:
- Android users: Follow the on-screen prompts or enable the information reminder function in the APP. Grant the APP notification permissions as instructed.
- Apple users: After connecting the watch to the APP, a pairing request will appear on your phone. Allow pairing and enable the notification switches for desired applications within the APP. Additionally, ensure "Notification Center" is enabled for the relevant apps in your phone's Settings > Notifications.
3. The reminder switch is turned on, but there are no reminders on the watch, or reminders are sporadic.
Answer: Verify that the phone's message notifications and corresponding notification permissions are enabled as per the instructions above. Ensure Bluetooth remains active and the APP and watch stay connected. If these conditions are met, but alerts are still inconsistent, the system's authorized APP alert function might be malfunctioning. Re-check the message push function settings.
4. Android phone's Bluetooth often disconnects or loses message alerts after a period of connection.
Answer: Android systems may periodically clean up background applications or high-power-consuming apps to maintain system performance. If the APP is not set to allow background running, it can be easily closed by the system, causing Bluetooth disconnections. The method for setting background running permissions varies by Android phone model. For example, on a Huawei nova 8 SE: Go to Settings > Battery > Power Consumption Ranking > APP > Application Launch Management > Manually manage to turn on background running.
5. The watch cannot measure, or the data is not accurate.
Answer:
- Before measurement, sit down and relax, keeping your arms level with your chest.
- Adjust the watch's tightness. The back of the watch should be close to the skin to prevent light leakage from the photoelectric sensor.
- Remain calm during measurement. Talking, coughing, or sneezing can affect measurement accuracy.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
