Brydge 11.0 MAX+ User Manual
Getting Started
Power
To Turn On: Press the power key for one second until the LED flashes green.
To Turn Off: Press and hold the power key for three seconds until the LED flashes red.
Note: The Brydge 11 MAX+ features Instant-On™, allowing for quick reconnection. Once paired, your keyboard connects instantly to your iPad for up to 4 hours before entering sleep mode without impacting power consumption.
Pairing
To Pair: Press and hold the Bluetooth™ key for three seconds until the LED flashes blue. On your iPad, navigate to Settings > Bluetooth™ and select "Brydge 11 MAX+". When successfully paired, the blue LED will turn off, and your keyboard and trackpad will be active.
Update Firmware
Download the Brydge Connect app from the App Store for the latest firmware updates.
Settings
AssistiveTouch settings must be turned OFF for trackpad gestures to function correctly. To disable: Go to iPad Settings > Accessibility > Touch > AssistiveTouch and set it to OFF.
Trackpad Gestures
- Open Today View: Use two fingers to swipe right.
- Zoom In and Out: Pinch open with two fingers to zoom in, or pinch closed to zoom out.
- Switch Between Open Apps: Swipe left or right with three fingers.
- Open the App Switcher: Swipe up with three fingers, pausing before lifting your fingers.
- Scroll Up or Down: Swipe two fingers up or down.
- Scroll Left or Right: Swipe two fingers left or right.
- Go Home: Use one finger to swipe the pointer from the bottom edge of the screen upwards.
- Open Control Center: Use one finger to swipe from the top-right corner of the screen.
- Open Search: Swipe down with two fingers.
Inserting and Removing iPad
To Insert:
Place your Brydge on a flat surface and open the case. Position your iPad in the bottom of the case, leaning it towards the back. Magnets will secure it in place.
To Remove:
Place your Brydge on a flat surface. Use the tabs located on either side of the case to release the iPad.
Charging
Check Battery Life:
In Today View, navigate to the BATTERIES section. If it's not visible, swipe left from your Home Screen to reveal Today View, scroll to the bottom, click "Edit," find "Batteries," and click the green "+" icon to add it.
Note: If battery life drops below 15%, backlit key functionality will be disabled to conserve power.
To Charge:
Connect the charging cable to the keyboard and plug the other end into a power source. A solid red LED indicates the Brydge is charging. The red LED will turn off when fully charged. A full charge may take up to three hours.
Keyboard Shortcuts
| Action | Shortcut |
|---|---|
| Copy | Command + C |
| Paste | Command + V |
| Cut | Command + X |
| Underline | Command + U |
| Italic | Command + I |
| Home Screen | Command + H |
| Switch App | Command + Tab |
| Show Dock | Command + Option + D |
| Search | Command + Space |
| Undo | Command + Z |
| Switch Language | Ctrl + Shift + Spacebar (Press Spacebar to cycle through languages) |
Warranty
Thank you for purchasing a Brydge product. This product is covered by a 1-year limited hardware warranty. For full terms and conditions, please visit www.brydge.com/warranty. Brydge warranties are non-transferable and are only valid for the original end-user. Warranties do not apply to products purchased from unauthorized online vendors. If a defect arises during the warranty period, please stop using the product and contact Brydge. For warranty service, visit www.brydge.com/support or call +1 (435) 604-0481. Brydge will, at its discretion, repair or replace the product with a new or equivalent product. Brydge offers free return shipping for approved warranty claims within the United States. For international customers, Brydge will reimburse return shipping up to US$15.00 upon receipt of the shipping documentation.
Australia Only: Brydge products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA
Have a question? Visit www.brydge.com/support
Compliance Information
This wireless keyboard (Brydge 11.0 MAX+, FCC ID: 2ADRG-BRY403, IC: 24378-BRY403) is compatible with the iPad Pro 11-inch (1st, 2nd, and 3rd generations) and iPad Air (4th generation). Specific FCC and IC IDs for compatible iPad models are provided in the original documentation.
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: the device may not cause harmful interference, and it must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used according to instructions. If interference occurs, users are encouraged to reorient or relocate the receiving antenna, increase separation between equipment and receiver, connect equipment to a different circuit, or consult a dealer or experienced technician.
© 2021 Brydge. All Rights Reserved. iPad and Apple are registered trademarks of Apple Inc. Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. Brydge is a trademark of Brydge Global Pte. Ltd. Other trademarks are property of their respective owners.
