Brydge W-Type User Manual
Connecting (Pairing)
- Slide the power switch on the back of the keyboard from OFF to ON.
- Press and hold one of the four Bluetooth buttons on the keyboard until a blue light flashes under the key.
- Go to Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth and select Brydge W-Type.
Note: The Brydge W-Type can be paired with up to four devices but can only be used with one device at a time. To switch between devices, tap the relevant Bluetooth key to select the appropriate device.
Charge
To charge your Brydge W-Type, insert the supplied USB-C cable into the charging port on the back of the keyboard. The battery is charging when the Bluetooth 1 key flashes red. The flashing will stop when the battery is fully charged.
Function Mode
The Brydge W-Type is preset in media mode, offering control over play, pause, volume, and other features. To access function keys (F1-F12), switch to function mode by pressing the Function and Esc keys simultaneously.
Support
Have a question? Visit www.brydge.com/support.
Warranty and Compliance
This product comes with a 1-year limited hardware warranty. For full warranty terms and conditions, visit www.brydge.com/warranty. Brydge Technologies LLC, 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA.
This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to conditions that prevent harmful interference. Changes or modifications not expressly approved may void the user's authority to operate the equipment.
Caution: Dispose of used batteries according to instructions. Do not expose batteries to excessive heat.
© 2020 Brydge. All Rights Reserved. Microsoft, Microsoft Surface, and the Microsoft Surface logo are trademarks of Microsoft Corporation.
Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and used under license.